Manual de Instruções da Luminária Solar Externa com Sensor de Movimento LE WL4000

1. Introdução

This manual provides detailed instructions for the installation, operation, and maintenance of your LE Solar Outdoor Motion Sensor Light, model WL4000. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

Imagem 1.1: Terminadoview of the LE Solar Outdoor Motion Sensor Light WL4000.

2. Recursos do Produto

• Amplo ângulo de iluminação: Features 3 adjustable heads providing 270° wide lighting coverage.
• Alto Brilho: Delivers 1000 lumens of 6500K daylight illumination.
• Carregamento solar eficiente: Converts sunlight into electricity, charging during the day for night operation.
• PIR Motion Sensor: Detects motion within 16-26 feet and a 120° angle, automatically turning the light on.
• Operação automática: Stays off during the day, charges in sunlight, and turns on for 20 seconds when motion is detected at night.
• Durável e resistente às intempéries: IP65 waterproof rating ensures resistance to water, heat, and frost for reliable outdoor performance.
• Fácil instalação: Wireless design requires no household electrical circuit, simplifying mounting with included hardware.

Image 2.1: Product dimensions and adjustable light heads.

Image 2.2: The 270-degree wide lighting angle.

Image 2.3: Motion sensor detection range and angle.

3. Conteúdo da embalagem

• LE Solar Outdoor Motion Sensor Light (WL4000)
• Acessórios de montagem (parafusos e buchas)
• Manual do usuário

4. Configuração e instalação

Siga estes passos para instalar corretamente sua luminária solar:

1. Escolha um local: Select an outdoor location that receives direct sunlight for at least 8 hours a day to ensure optimal charging. The recommended installation height is 1.5-3.5 meters (5-12 feet).
2. Instale o Lamp Suporte: Use the included screws and wall anchors to securely fix the lamp holder to the desired exterior wall.
3. Ative a Luz: Locate the power switch on the back of the light unit. Press the button to turn the light ON.
4. Pendure a luz: Carefully hang the solar light unit onto the installed lamp titular.
5. Ajuste as cabeças de luz: Adjust the three light heads and the solar panel to your preferred angles for optimal lighting coverage and sun exposure.

Imagem 4.1: Processo de instalação passo a passo.

Image 4.2: Fixing the lamp suporte com parafusos.

Image 4.3: Activating the light using the mode switch.

Image 4.4: Hanging the light onto the lamp titular.

5. Instruções de operação

The LE Solar Outdoor Motion Sensor Light operates automatically based on ambient light and motion detection.

• Operação diurna: The light will remain off during the day and the solar panel will charge the internal battery using sunlight. Ensure the solar panel is clean and exposed to direct sunlight for optimal charging.
• Operação noturna: Once it gets dark, the motion sensor becomes active. When motion is detected within its 16-26 ft range and 120° angle, the light will automatically turn on at full brightness.
• Desligamento automático: The light will automatically turn off approximately 20 seconds after no further motion is detected.

Image 5.1: Solar charging and motion-activated lighting cycle.

6. Manutenção

To ensure optimal performance and extend the lifespan of your solar light, follow these maintenance guidelines:

• Limpe o painel solar: Limpe regularmente o painel solar com um pano macio e seco.amp cloth to remove dust, dirt, and debris. A clean panel ensures efficient sunlight absorption and charging.
• Obstruções claras: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel, especially during peak sunlight hours.
• Inspecione quanto a danos: Periodically check the light for any physical damage, loose connections, or signs of wear.
• Resistência às intempéries: The light is designed with IP65 waterproofing, making it resistant to rain, heat, and frost. However, extreme weather conditions may temporarily affect performance.

Image 6.1: IP65 waterproof, heat, and frost resistance features.

7. Solução De Problemas

If your solar light is not functioning as expected, consider the following common issues and solutions:

• A luz não acende à noite:
  • Certifique-se de que o interruptor de alimentação está na posição ON.
  • Verify the solar panel is receiving sufficient direct sunlight (at least 8 hours) during the day. Relocate if necessary.
  • Check if the solar panel is dirty or obstructed. Clean it thoroughly.
  • Confirm it is dark enough for the light to activate. The light has a built-in photocell sensor.
• Light stays on for a short period or is dim:
  • Insufficient charging due to cloudy weather, shade, or a dirty solar panel. Allow for more charging time or clean the panel.
  • The battery may not be fully charged. Ensure optimal sun exposure.
• Motion sensor is not detecting:
  • Certifique-se de que o sensor não esteja obstruído.
  • Verify the light is installed within the recommended height range (1.5-3.5 meters).
  • Test the sensor by walking within its detection range.

8. Especificações

9. Garantia e Suporte

For warranty information or technical support, please contact Lepro Customer Service. Details regarding your product's warranty period can be found with your purchase documentation or by contacting the seller directly. Please retain your proof of purchase for any warranty claims.