Introdução
This manual provides detailed instructions for the installation, operation, and maintenance of your Vissani Under Cabinet Range Hood. Please read thoroughly before use to ensure safe and efficient operation of the appliance.
Instruções importantes de segurança
Para reduzir o risco de incêndio, choque elétrico ou ferimentos às pessoas, observe o seguinte:
- Instale este exaustor de cozinha seguindo todas as instruções especificadas.
- Desligue sempre a alimentação elétrica antes de realizar qualquer manutenção ou limpeza no aparelho.
- Não opere nenhum ventilador com um cabo ou plugue danificado. Descarte o ventilador ou devolva-o a uma oficina de serviço autorizada para exame e/ou reparo.
- Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back-drafting. Follow the heating equipment manufacturer's guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
- Ao cortar ou furar uma parede ou teto, não danifique a fiação elétrica e outros serviços ocultos.
- Os ventiladores canalizados devem sempre ser ventilados para o exterior.
- Limpe os filtros de gordura com frequência. Não permita que a gordura se acumule no ventilador ou no filtro.
- Use proper size wiring and always use a dedicated circuit.
- Esta unidade deve ser aterrada.
Conteúdo da embalagem
Verify that all components are present and in good condition before beginning installation.
- Vissani Under Cabinet Range Hood Unit
- Charcoal Filter (included for ductless operation)
- Acessórios de montagem (parafusos, buchas)
- Duct Connector (for ducted installation)
- Manual do usuário

Components included with the Vissani range hood, showing filters, duct connector, and mounting hardware.
Configuração e instalação
The Vissani Under Cabinet Range Hood can be installed as either ducted (vented to the outside) or ductless (recirculating with charcoal filters).
Lista de verificação de pré-instalação
- Ensure the cabinet measurements are appropriate for a 30-inch range hood.
- Verify electrical supply is available and meets specifications.
- For ducted installation, ensure proper ductwork is in place.
- For ductless installation, ensure charcoal filters are installed.
Montagem do exaustor
- Carefully measure and mark the mounting points under the cabinet.
- Faça furos piloto para os parafusos de montagem.
- Lift the range hood into position and secure it with the provided screws.
- Connect the electrical wiring according to local codes and the wiring diagram in the manual.
- If installing as ducted, connect the ductwork to the top exhaust port. If ductless, ensure the charcoal filter is properly seated.

Frente view of the Vissani Under Cabinet Range Hood installed under a kitchen cabinet.

Lado view of the Vissani Under Cabinet Range Hood, showcasing seu design elegante em aço inoxidável.
Operating Your Range Hood
The Vissani range hood features intuitive push-button controls for easy operation of its lighting and fan functions.
Painel de controle
The control panel is located on the front of the range hood and consists of five push buttons:
- Botão de luz: Liga/desliga as luzes LED.
- Velocidade do ventilador 1: Activates the fan at low speed.
- Velocidade do ventilador 2: Ativa o ventilador em velocidade média.
- Velocidade do ventilador 3: Activates the fan at high speed.
- Botão Desligar: Desliga o ventilador.

Fechar-se view of the range hood's control panel, showing the push buttons for light and fan speed settings.
Operação leve
Press the light button (indicated by a light bulb icon) to turn the LED lights on or off. The lights illuminate your cooking surface effectively.
Controle de velocidade do ventilador
Select the desired fan speed (1, 2, or 3) based on your cooking needs. Speed 1 is for light ventilation, while Speed 3 provides maximum extraction for heavy cooking fumes. Press the 'Off' button to turn the fan off.
Manutenção e Cuidados
A manutenção regular garante o desempenho ideal e a longevidade do seu exaustor.
Limpeza dos filtros
The mesh filters should be cleaned regularly to prevent grease buildup. To remove, locate the latch on each filter, push it in, and pull the filter down. Clean with warm, soapy water or in a dishwasher. Ensure filters are completely dry before re-installing.

Fechar-se view of the mesh filter, designed to trap grease and odors.

A hand demonstrating the simple process of removing the mesh filter for cleaning.
Substituição do filtro de carvão
For ductless (recirculating) installations, the charcoal filter traps odors and should be replaced every 3-6 months depending on usage. Refer to the filter's specific instructions for replacement.

The charcoal filter, essential for odor removal in ductless configurations.
Substituição de lâmpada
The range hood uses GU10 LED bulbs (max 5W). To replace, ensure power is off, then carefully twist and pull out the old bulb. Insert the new bulb by aligning the pins and twisting to secure.

Close-up of the LED light fixture, showing the GU10 bulb type.

A hand indicating the location of the light fixture and the filter release latch.
Guia de solução de problemas
Consulte este guia para problemas comuns e suas soluções.
| Problema | Possível causa | Solução |
|---|---|---|
| O ventilador não funciona | No power supply; Fan switch off; Motor malfunction. | Check circuit breaker/fuse; Ensure fan switch is on; Contact customer support if motor is faulty. |
| As luzes não funcionam | Light switch off; Bulb loose or burnt out; Wiring issue. | Ensure light switch is on; Tighten or replace bulb; Check wiring connections. |
| Sucção insuficiente | Grease filters clogged; Charcoal filters saturated (ductless); Improper installation; Obstruction in ductwork. | Clean or replace filters; Verify proper installation and sealing; Check for duct obstructions. |
| Ruído excessivo | Loose parts; Fan motor imbalance; Obstruction in fan blades. | Check for loose screws or components; Inspect fan blades for debris; Contact customer support if motor is imbalanced. |
Especificações do produto
| Recurso | Especificação |
|---|---|
| Marca | Vissani |
| Informações do modelo | QR254S |
| Dimensões do produto | 18"P x 29.8"L x 5"A |
| Peso do item | 22.6 libras |
| Material | Aço inoxidável |
| Tipo de acabamento | Escovado |
| Cor | Aço inoxidável |
| Capacidade de fluxo de ar | 320 pés cúbicos por minuto |
| Nível de ruído | 1.5 Sons |
| Tipo de montagem | Montagem sob o gabinete |
| Componentes incluídos | Filtro de carvão |
| Tipo de controle | Botão de pressão |
| Tipo de fonte de luz | LIDERADO |
| O quetage | 1E+1 (10W) |
| Tipo de filtro | Malha |
| Tipo de ventilação | [BOTH] (Ducted/Ductless) |
| UPC | 056677874543 |
Garantia e Suporte ao Cliente
For warranty information or technical assistance, please contact Vissani customer support. Keep your purchase receipt for warranty claims.
As informações de contato geralmente podem ser encontradas no site oficial do fabricante. website ou na embalagem do produto.





