Introdução
This manual provides essential information for the setup, operation, and maintenance of your Ibanez Standard SR300E electric bass guitar. The SR300E is designed for comfortable playability and versatile sound, featuring a sleek 5-piece maple/walnut neck, a comfortable arched nyatoh body, and Ibanez PowerSpan Dual Coil pickups with a 3-band EQ and Power Tap switch.
Os principais recursos incluem:
- 4-string Electric Bass with Nyatoh Body
- Maple/Walnut Neck for stability and playability
- Jatoba Fingerboard
- 2 Humbucking Pickups (PowerSpan Dual Coil)
- 3-band EQ with Power Tap for extensive tonal shaping
Figure 1: Ibanez SR300E Bass Guitar (Cerulean Aura Burst finish).
1. Configuração
1.1 Desembalagem e Inspeção Inicial
Carefully remove your bass guitar from its packaging. Inspect the instrument for any signs of damage that may have occurred during shipping. Ensure all components, including the fixed bridge and black hardware, are present and securely attached.
1.2 Battery Installation for Active Electronics
The SR300E features active electronics, which require a 9-volt battery for operation. Locate the battery compartment on the back of the instrument. Open the compartment and insert a fresh 9-volt battery, observing the correct polarity. Close the compartment securely.
Importante: To prevent battery drain, always unplug your instrument cable from the bass when not in use. Leaving the cable plugged in will continuously draw power from the battery, leading to premature battery depletion.
1.3 Conectando-se a um Ampmais vivo
Connect one end of a standard 1/4" instrument cable to the output jack on your bass guitar and the other end to the input of your bass ampamplificador. Certifique-se de que seu amplifier is turned off or its volume is set to minimum before connecting or disconnecting the instrument.
1.4 Tuning the Instrument
Use an electronic tuner to accurately tune your bass guitar. The standard tuning for a 4-string bass is E-A-D-G (from thickest to thinnest string). Gently turn the tuning pegs to adjust the pitch of each string until the tuner indicates the correct note.
Figure 2: Headstock and tuning machines of the Ibanez SR300E Bass Guitar.
2. Operando seu baixo
2.1 controles acimaview
The Ibanez SR300E features a versatile control layout to shape your tone:
- Botão de volume: Controls the overall output level of the instrument.
- Balancer Knob: Blends the output between the neck and bridge pickups. Turning it towards the neck pickup emphasizes warmer tones, while turning it towards the bridge pickup provides brighter, more articulate sounds.
- 3-Band EQ (Bass, Mid, Treble): These knobs allow you to boost or cut specific frequency ranges.
- Baixo: Adjusts low-end frequencies for warmth and depth.
- Meio: Adjusts mid-range frequencies for punch and presence.
- Agudos: Adjusts high-end frequencies for clarity and brightness.
- Power Tap Switch: This 3-way switch modifies the pickup configuration, offering different tonal characteristics:
- Modo de toque: Provides a single-coil sound, offering a clearer, more dynamic tone.
- Modo Série: Delivers a full humbucker sound, characterized by a thick, powerful low-end.
- Power Tap Mode: Combines the clarity of single-coil with the fat low-end of humbucking, offering a unique blend.
Figure 3: Detail of the control knobs and PowerSpan Dual Coil pickups.
3. Manutenção
3.1 Limpeza
Regularly wipe down your bass with a soft, dry, lint-free cloth after each use to remove sweat, fingerprints, and dust. For a deeper clean, use a guitar-specific cleaning solution on the body and hardware. Avoid abrasive cleaners or solvents.
The Jatoba fretboard can be cleaned with a damp cloth and occasionally treated with a fretboard conditioner to prevent drying and cracking.
Substituição de cordas 3.2
Strings should be replaced periodically, depending on usage, to maintain optimal tone and playability. Your SR300E comes with Nickel strings. When replacing, change one string at a time to maintain neck tension. Stretch new strings gently to help them settle and hold tune.
3.3 Substituição da bateria
When the sound becomes weak or distorted, it is likely time to replace the 9-volt battery for the active electronics. Refer to section 1.2 for battery installation instructions. Always use a fresh alkaline 9-volt battery.
3.4 Armazenamento
Store your bass guitar in a stable environment, away from extreme temperature changes or humidity fluctuations. A gig bag or hard case is recommended for protection during storage and transport.
4. Solução De Problemas
- Sem som ou som fraco:
- Check if the instrument cable is securely plugged into both the bass and the ampmais vivo.
- Garantir o ampO amplificador está ligado e o volume está alto.
- Verify the bass's volume knob is turned up.
- Replace the 9-volt battery for the active electronics (see section 3.3). This is a common cause for no or weak sound on active basses.
- Poor Sound Quality (Distortion, Buzzing, Hum):
- Check all cable connections for looseness or damage. Try a different cable.
- Garantir o amplifier settings are appropriate and not overdriven.
- If buzzing occurs, check for proper grounding in your electrical setup.
- A loose component, such as a tuner or bridge saddle, can cause unwanted vibrations. Inspect hardware for tightness.
- Dificuldade em manter a afinação:
- Ensure strings are properly installed and stretched.
- Check for worn or damaged strings; replace if necessary.
- Verify that the tuning machines are functioning correctly and are not loose.
- Environmental changes (temperature/humidity) can affect tuning stability. Allow the instrument to acclimate.
If you encounter issues not covered here or require professional assistance, contact an authorized Ibanez service center or a qualified guitar technician.
5. Especificações
| Número do modelo | SR300E |
| Material do corpo | Nyatoh |
| Material do pescoço | 5-piece Maple/Walnut |
| Material do braço da guitarra | Jatobá |
| Número de Strings | 4 |
| Captadores | Ibanez PowerSpan Dual Coil Humbuckers |
| Eletrônica | Active 3-band EQ with Power Tap Switch |
| Ponte | Fixed bridge |
| Cor do hardware | Preto |
| Material da Corda | Níquel |
| Peso do item | 10.5 libras (4.76 kg) |
| Dimensões do produto | 47.79 x 18.68 x 3.78 polegadas (121.4 x 47.4 x 9.6 cm) |
| Cor | Cerulean Aura Burst |
6. Garantia e Suporte
6.1 Informações de garantia
Ibanez products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your region, please refer to the warranty card included with your purchase or visit the official Ibanez website. Guarde o comprovante de compra para solicitações de garantia.
6.2 Suporte ao cliente
Should you require technical assistance, parts, or service, please contact Ibanez customer support or an authorized Ibanez dealer in your area. Contact information can typically be found on the official Ibanez website ou na documentação do produto.
Ibanez Oficial Website: www.ibanez.com





