Manual de instruções do módulo de persiana inteligente Wi-Fi Homcloud AS-CM1

1. Introdução

Thank you for choosing the Homcloud AS-CM1 Wi-Fi Smart Shutter Module. This module is designed to integrate your traditional roller shutters, blinds, or curtains into your smart home system, allowing for convenient control via a smartphone application or voice commands. Please read this manual carefully before installation and use to ensure proper operation and safety.

2. Produto acabadoview

The Homcloud AS-CM1 is a compact Wi-Fi module that can be recessed into a standard electrical box (e.g., 503 type) behind your existing shutter switch. It enables smart control of motorized shutters while retaining the functionality of your traditional wall switch. Key features include remote control, timer scheduling, and compatibility with popular voice assistants like Amazon Alexa and Google Home.

Imagem 2.1: Homcloud Wi-Fi Curtain Module AS-CM1 product label. This image displays the product label of the Homcloud Wi-Fi Curtain Module, model AS-CM1. It shows the Homcloud logo, product name 'Wi-Fi Curtain Module', Homcloud code AS-CM1, model QS-WIFI-C01, operating voltage 220-240V~50Hz, maximum current 3A, Wi-Fi specification 2.4Ghz 802.11 b/g/n, and the website www.homcloud.com. Below these details are the terminal markings N, L, and symbols for motor connections.

3. Informações de segurança

• Risco elétrico: A instalação deve ser realizada apenas por um eletricista qualificado ou por uma pessoa com profundo conhecimento de sistemas elétricos.
• Desconexão de energia: Desligue sempre a energia no disjuntor principal antes de realizar qualquer trabalho elétrico.
• Volumetage e atual: Ensure the module's specifications (220-240V~50Hz, Max. 3A) are compatible with your electrical system and motor.
• Somente para uso interno: Este dispositivo destina-se ao uso interno em ambientes secos.
• Segurança das crianças: Mantenha o dispositivo fora do alcance de crianças.

4. Especificações

5. Instalação

Importante: Ensure power is disconnected at the main circuit breaker before starting installation.

1. Prepare a caixa elétrica: Open the electrical box (e.g., 503 type) where your traditional shutter switch is located.
2. Fiação: Connect the Homcloud AS-CM1 module according to the wiring diagram. The module has terminals for Line (L), Neutral (N), and motor control (Up/Down). Ensure correct connections to avoid damage to the module or motor.

Imagem 5.1: Homcloud Wi-Fi Smart Shutter Module 2-gang/2-way wiring diagram. This image provides a detailed wiring diagram for the Homcloud Wi-Fi Smart Shutter Module in a 2-gang/2-way configuration. It shows connections for Line (L), Neutral (N), and motor control (up/down arrows), along with the physical switches and the module itself, illustrating how to integrate it into an existing electrical system.

3. Colocação do módulo: Carefully place the module inside the electrical box behind the existing shutter switch. Its compact size is designed to fit into standard recessed boxes.

Imagem 5.2: Homcloud Wi-Fi Smart Shutter Module installation diagram. This diagram illustrates the installation process of the Homcloud Wi-Fi Smart Shutter Module. It shows a standard wall switch, the smart module, and how the module is placed behind the switch within the electrical box, indicating a seamless integration.

Imagem 5.3: Homcloud Wi-Fi Smart Shutter Module recessed installation. A close-up view showing the Homcloud Wi-Fi Smart Shutter Module neatly installed inside a standard electrical wall box, positioned behind the wall switch. This demonstrates its compact design suitable for recessed installation.

4. Secure and Restore Power: Close the electrical box and secure the switch plate. Restore power at the main circuit breaker.

6. Configuração

6.1. Download e registro do aplicativo

1. Baixe o Homcloud App or Smart Life App Disponível na App Store (iOS) ou na Google Play Store (Android).
2. Registre uma nova conta ou faça login com uma existente.

Imagem 6.1: Homcloud Smart Home Solutions app download. This image shows multiple smartphones displaying the Homcloud app interface, along with QR codes and buttons for downloading the app from the App Store and Google Play. It highlights the 'Homcloud Smart Home Solutions' branding and the app's availability for both iOS and Android devices. You can also find the app at smartapp.tuya.com/homcloudsmart.

6.2. Emparelhamento de dispositivos

1. Certifique-se de que seu smartphone esteja conectado a uma rede Wi-Fi de 2.4 GHz.
2. After restoring power to the module, it should enter pairing mode (often indicated by a blinking light or sound). If not, locate the reset button on the module (refer to Image 6.2) and press it for 5-10 seconds until it enters pairing mode.

Imagem 6.2: Homcloud Wi-Fi Smart Shutter Module with reset button. This diagram illustrates the Homcloud Wi-Fi Smart Shutter Module, highlighting its reset button ('Ripristino/reset') and the mounting clip ('Clip montaggio'). This shows key physical features for installation and initial setup.

3. In the Homcloud/Smart Life App, tap '+' or 'Add Device'.
4. Select 'Curtain Switch' or 'Shutter Module' from the device list.
5. Follow the on-screen instructions to connect the module to your Wi-Fi network. This typically involves confirming the indicator light status and entering your Wi-Fi password.
6. Once connected, you can rename the device for easier control (e.g., "Living Room Shutter").

6.3. Calibração

For accurate partial opening/closing, you need to calibrate the module by setting the maximum operation time:

1. In the app, navigate to the device settings for your shutter module.
2. Find the calibration or 'Motor Travel Time' setting.
3. Measure the time it takes for your shutter to fully open or fully close (e.g., 30 seconds).
4. Enter this duration in seconds into the app. This allows the module to estimate the shutter's position for percentage-based control.

7. Instruções de operação

7.1. Controle de aplicativos

The Homcloud/Smart Life App provides comprehensive control over your smart shutter module:

• Abrir fechar: Tap the respective buttons to fully open or close the shutters.
• Controle parcial: Use the slider or percentage input to set the shutter to a specific open position (e.g., 50% open).
• Temporizador/Agenda: Set schedules for automatic opening and closing at specific times (e.g., open at 7 AM, close at 8 PM).
• Criação de cena: Integrate the shutter module into smart scenes with other devices (e.g., 'Good Morning' scene opens shutters and turns on lights).
• Compartilhamento de dispositivos: Compartilhe o controle do módulo com membros da família através do aplicativo.

Imagem 7.1: Remote control via smartphone app. This image depicts a hand holding a smartphone displaying the Homcloud app interface, with a large power button icon, indicating remote control functionality for the smart shutter module. The background shows a modern living room, suggesting smart home integration.

7.2. Controle de voz

The module is compatible with Amazon Alexa and Google Home. Link your Homcloud/Smart Life account to your voice assistant app.

• Comandos básicos:
  • "Alexa, abra [Nome do Dispositivo]"
  • "Ok Google, feche [Nome do dispositivo]"
• Partial Control Commands:
  • "Alexa, set [Device Name] to 50%"
  • "Hey Google, open [Device Name] by 20%"

7.3. Controle Manual

The Homcloud AS-CM1 module works in parallel with your traditional wall switch. You can still use the physical switch to open, close, or stop the shutters. The app will reflect the current status even after manual operation.

8. Manutenção

• Limpeza: Ensure the module is clean and free from dust. Disconnect power before cleaning. Use a dry, soft cloth.
• Nenhuma peça que possa ser reparada pelo usuário: Do not attempt to open or repair the module yourself. This will void the warranty and may pose a safety risk.
• Atualizações de firmware: Periodically check the Homcloud/Smart Life App for available firmware updates to ensure optimal performance and security.

9. Solução De Problemas

• Módulo não responde:
  • Verifique se o módulo está energizado.
  • Verifique se sua rede Wi-Fi está ativa e se o módulo está dentro do alcance.
  • Try restarting the module by cycling its power at the circuit breaker.
  • If issues persist, attempt to re-pair the device with the app.
• Problemas de conectividade de aplicativos:
  • Certifique-se de que seu telefone esteja conectado à internet.
  • Confirm your Wi-Fi router is functioning correctly and providing a 2.4GHz signal.
  • Reinicie o seu roteador Wi-Fi.
• Inaccurate Shutter Position (Calibration):
  • Recalibrate the motor travel time in the app settings (refer to Section 6.3).
  • Ensure the shutter moves freely without obstruction.
• Controle de voz não funciona:
  • Verify that your Homcloud/Smart Life account is correctly linked to Alexa or Google Home.
  • Check the device name in the voice assistant app and ensure it matches your commands.
  • Ensure your voice assistant device is online and functioning.

10. Garantia e Suporte

Homcloud provides support for its products. If you encounter any issues not covered in this manual or require further assistance, please contact Homcloud customer support. Refer to the product packaging or the Homcloud website para informações de contato.