Manual do Usuário da Luminária de Teto Têxtil Preta Smartwares IDE-60047

1. Introdução

This manual provides detailed instructions for the installation, operation, and maintenance of your Smartwares IDE-60047 Black Textile Ceiling Light. Please read this manual carefully before installation and retain it for future reference. This ceiling light features a 60 cm diameter textile shade and is designed for indoor use, providing ambient lighting with four E27 bulb sockets.

Image 1.1: The Smartwares IDE-60047 Black Textile Ceiling Light.

2. Informações de segurança

• Always disconnect the power supply before installation, maintenance, or bulb replacement.
• A instalação deve ser realizada por um eletricista qualificado caso você não tenha certeza sobre a fiação elétrica.
• Certifique-se de que a superfície de montagem suporte o peso da luminária.
• Não exceda a temperatura máximatage of 18W per bulb socket.
• Este produto foi projetado apenas para uso interno (classificação IP20). Não o exponha à umidade ou a temperaturas extremas.
• Mantenha os materiais de embalagem longe das crianças.

3. Conteúdo da embalagem

Verifique se todos os componentes estão presentes antes de iniciar a instalação:

• Smartwares IDE-60047 Ceiling Light (Textile Shade and Mounting Base)
• Manual do usuário

Observação: as lâmpadas não estão incluídas e devem ser adquiridas separadamente.

4. Instruções de instalação

Follow these steps for proper installation of your ceiling light:

1. Preparação: Desligue a alimentação principal no disjuntor antes de iniciar qualquer trabalho elétrico.
2. Mounting the Base Plate:
   Position the mounting base against the ceiling at your desired location. Mark the drilling points. Drill holes and insert appropriate wall plugs (if necessary). Secure the mounting base to the ceiling using screws. Ensure it is firmly attached.
   

   Imagem 4.1: Interna view of the ceiling light's mounting base with E27 sockets.

3. Fiação:
   Connect the household electrical wires to the terminals on the ceiling light's mounting base. Ensure correct polarity (Live, Neutral, Earth). The connection box may require careful opening to access the terminals. Secure all connections.
4. Attaching the Textile Shade:
   Carefully align the textile shade with the mounting base. The shade is designed to fit over the base and secure into place. Ensure it is evenly seated and stable.
5. Instalando lâmpadas:
   Screw four E27 base bulbs (max 18W each, LED compatible) into the sockets. Do not overtighten.
6. Verificação final: Once all steps are complete, restore power at the circuit breaker. Test the light fixture.

For alternative installation as a pendant light, the Smartwares 10.005.71 or 6000.518 suspension kit (sold separately) is required.

Image 4.2: The ceiling light can be adapted for pendant installation with an optional kit.

5. Instruções de operação

The Smartwares IDE-60047 ceiling light operates via a standard wall switch connected to your household electrical circuit. It is compatible with E27 LED bulbs up to 18W per socket.

• Ligar/desligar: Use o interruptor de parede para ligar ou desligar a luz.
• Funcionalidade regulável: While the fixture itself is not inherently dimmable, it is compatible with dimmable E27 LED bulbs. To utilize dimming, you must install dimmable bulbs and connect the fixture to a compatible dimmer switch (not included) in your electrical system.

6. Manutenção

• Limpeza: Disconnect power before cleaning. Wipe the textile shade and plastic diffuser with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Substituição de lâmpada: Disconnect power. Allow bulbs to cool completely. Unscrew old bulbs and replace with new E27 bulbs, ensuring they do not exceed 18W.

7. Solução De Problemas

• A luz não acende:
  Check the power supply at the circuit breaker. Ensure bulbs are correctly installed and not faulty. Verify all electrical connections are secure.
• A luz pisca:
  Ensure bulbs are fully screwed in. If using LED bulbs, confirm they are compatible with the fixture and your electrical system. If using a dimmer, ensure both the bulbs and dimmer switch are compatible with each other. A loose connection can also cause flickering.
• Difficulty attaching the shade:
  Ensure the shade is correctly aligned with the mounting guides on the base. Apply gentle, even pressure. Do not force the shade, as this may damage the textile or frame.

8. Especificações

Image 8.1: Product dimensions: 60 cm diameter, 10 cm height.

9. Garantia e Suporte

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact Smartwares customer service. Keep your proof of purchase for warranty claims.