Introdução
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw. Please read these instructions carefully before using the tool to ensure safe and optimal performance. This tool is designed for cutting wood and similar materials.
Instruções de segurança
Avisos gerais de segurança para ferramentas elétricas:
- Segurança da Área de Trabalho: Keep the work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Segurança elétrica: Evite contato corporal com superfícies aterradas ou aterradas, como canos, radiadores, fogões e geladeiras. Há um risco maior de choque elétrico se seu corpo estiver aterrado ou aterrado.
- Segurança pessoal: Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and a dust mask. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Uso e cuidados com a ferramenta elétrica: Ensure the switch is in the off-position before connecting to the battery pack, picking up, or carrying the tool. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the correct power tool for your application. Do not force the power tool.
- Manutenção: Faça a manutenção de ferramentas elétricas e acessórios. Verifique se há desalinhamento ou travamento de peças móveis, quebra de peças e qualquer outra condição que possa afetar a operação da ferramenta elétrica.
Avisos de segurança específicos para serras circulares:
- Mantenha as mãos afastadas da área de corte e da lâmina. Não coloque a mão embaixo da peça de trabalho.
- Ajuste a profundidade de corte to the thickness of the workpiece.
- Never hold the workpiece in your hands or across your leg while cutting. Secure the workpiece to a stable platform.
- Check the lower guard for proper closing before each use. Do not operate the saw if the lower guard does not move freely and close instantly.
- Always use blades of the correct size and shape for the arbor hole.
- Nunca use arruelas ou parafusos de lâmina danificados ou incorretos.
Produto acimaview
Familiarize yourself with the components of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw before operation.
Image: The Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw, showcasing its red and grey housing, ergonomic handle, blade guard, and robust base plate. The saw blade is clearly visible, highlighting the tool's design for portability and ease of use.
Componentes principais:
- Punho principal: Ergonomic grip for primary control and operation.
- Alça auxiliar: Provides additional stability and control during cutting.
- Interruptor liga/desliga: Ativa e desativa o motor.
- Bloqueio do eixo: Button used to lock the spindle for safe and easy saw blade changes.
- Protetor de Lâmina: Retractable guard that protects the user from the rotating blade.
- Base Plate (Saw Table): The flat surface that rests on the workpiece, guiding the saw during cuts.
- Alavanca de ajuste de profundidade: Mechanism for setting the desired cutting depth.
- Alavanca de ajuste de inclinação: Mechanism for setting the desired cutting angle for bevel cuts.
- Lâmina de serra: The cutting accessory, typically a 165mm diameter blade with a 20mm arbor hole.
- Adaptador para extração de poeira: Port for connecting a dust collection system to minimize sawdust.
- Battery Pack Receptacle: Slot for inserting the Einhell Power X-Change 18V battery pack (battery not included).
Configurar
1. Instalação da bateria
Ensure the tool is switched off before installing or removing the battery pack.
- Align the battery pack with the receptacle on the tool.
- Slide the battery pack into the receptacle until it clicks securely into place.
- Para remover, pressione o botão de liberação na bateria e deslize-a para fora.
2. Instalação da lâmina de serra
Always disconnect the battery pack before changing the saw blade to prevent accidental startup.
- Pressione e mantenha pressionado o botão de trava do eixo para impedir que a lâmina gire.
- Use the provided wrench to loosen the blade retaining screw by turning it clockwise (this is a left-hand thread).
- Remova a flange externa e a lâmina de serra antiga.
- Clean the inner flange and the blade mounting area thoroughly.
- Place the new saw blade onto the inner flange, ensuring the rotation direction arrow on the blade matches the arrow on the saw's housing.
- Replace the outer flange and tighten the blade retaining screw counter-clockwise (left-hand thread) firmly with the wrench while holding the spindle lock.
3. Ajuste da profundidade de corte
The cutting depth should be set so that the blade teeth protrude slightly below the workpiece, typically by about 2-3 mm, for efficient cutting and reduced kickback.
- Afrouxe a alavanca de ajuste de profundidade.
- Move the base plate up or down to achieve the desired cutting depth, using the depth scale as a guide.
- Tighten the depth adjustment lever securely to lock the setting.
4. Ajuste do ângulo de bisel
The saw can make bevel cuts up to 45 degrees for angled cuts.
- Afrouxe a alavanca de ajuste do chanfro.
- Tilt the saw to the desired angle, indicated on the bevel scale.
- Tighten the bevel adjustment lever securely to lock the angle.
Instruções de operação
1. Iniciando e Parando
- To start the saw, first press the safety lock-off button (if present), then squeeze the trigger switch.
- To stop the saw, simply release the trigger switch. The blade will come to a stop.
2. Fazendo um corte
- Prenda firmemente a peça de trabalho com clamps to prevent movement during cutting.
- Position the saw on the workpiece with the front of the base plate resting on the material. Ensure the blade is not touching the workpiece before starting the saw.
- Ligue a serra e deixe a lâmina atingir a velocidade máxima antes de começar a cortar o material.
- Slowly guide the saw through the workpiece, maintaining a steady, even pressure. Do not force the saw, as this can lead to kickback or damage to the tool/blade.
- After completing the cut, release the trigger switch and allow the blade to stop completely before lifting the saw from the workpiece.
3. Extração de poeira
For a cleaner work environment and improved visibility, connect a suitable dust extraction system (e.g., a shop vacuum) to the dust extraction adapter on the saw.
Manutenção
Limpeza
Regularly clean the ventilation slots and the saw blade area to prevent dust buildup, which can affect performance and motor life. Use a soft brush or compressed air. Do not use water or solvents, as these can damage the tool's electrical components or plastic parts.
Cuidados com a lâmina
Inspect the saw blade regularly for sharpness, cracks, or missing teeth. A dull or damaged blade can cause binding, kickback, and poor cut quality. Replace dull or damaged blades immediately with a suitable replacement blade (165mm diameter, 20mm arbor hole).
Armazenar
Store the saw in a dry, secure place, out of reach of children. Always remove the battery pack before storing the tool for extended periods.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Serra não inicia | Battery not charged or improperly installed; safety lock-off not engaged. | Charge battery, ensure proper installation, press safety lock-off before trigger. |
| A serra corta lentamente ou trava. | Dull or incorrect blade; incorrect cutting depth; forcing the saw; workpiece not secured. | Replace blade, adjust depth, reduce feed pressure, secure workpiece firmly. |
| Vibração excessiva | Damaged or unbalanced blade; loose components; worn bearings. | Inspect/replace blade, check for loose screws and tighten, contact service if bearings are suspected. |
| Poor cut quality (rough edges, splintering) | Dull blade; incorrect blade type for material; too fast feed rate. | Replace blade, use appropriate blade for material, reduce feed rate. |
Especificações
- Modelo: Einhell TE-CS 18/165-1 Li-Solo
- Volumetage: 18 V (Battery Operated)
- Velocidade sem carga: 4,200 min⁻¹
- Diâmetro da lâmina de serra: 165 milímetros
- Arbor Hole Diameter: 20 milímetros
- Max. Cutting Depth (90°): Aproximadamente 54 mm
- Max. Cutting Depth (45°): Aproximadamente 35 mm
- Peso do item: 2.72 kg (sem bateria)
- Material da lâmina: Aço rápido
- Número de dentes: 24
- Recurso especial: Operação sem fio
- Componentes incluídos: Lâmina de serra
- Observação: Battery and charger are not included and must be purchased separately as part of the Einhell Power X-Change system.
Garantia e Suporte
This Einhell product comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Einhell website. For technical support, service, or to inquire about replacement parts, please contact Einhell customer service through their official channels.
