Weiser Elements Square Single Cylinder Deadbolt Instruction Manual

Introdução

The Weiser Elements Square Single Cylinder Deadbolt is designed for use on exterior doors where key and security are required. This deadbolt can be locked or unlocked by a key on the outside or by the thumbturn on the inside. It features SmartKey re-key technology, allowing you to re-key the lock quickly and easily. This product is ANSI/BHMA Grade 3 certified, includes an adjustable latch for standard door preparations, and has a 1-inch deadbolt throw. Its universal door handling fits both right and left-handed doors, and it is ADA Compliant. It fits door thicknesses from 1 3/8" to 1 3/4" and comes in a Matte Black finish.

Conteúdo da embalagem

Verifique se todos os componentes estão presentes antes de iniciar a instalação:

• Exterior Deadbolt Assembly (with key cylinder)
• Interior Deadbolt Assembly (with thumbturn)
• Trava da fechadura
• Placa de ataque
• Parafusos de montagem
• 2 x Chaves
• Ferramenta de recodificação SmartKey

Image showing the exterior and interior components of the Weiser Elements Square Single Cylinder Deadbolt, including the key cylinder and thumbturn.

Configuração e instalação

This section provides step-by-step instructions for installing your Weiser Elements Square Single Cylinder Deadbolt. Ensure you have the necessary tools before starting.

Ferramentas necessárias

• Chave de fenda Phillips
• Fita métrica
• Lápis

Preparação da porta

1. Certifique-se de que a espessura da sua porta esteja entre 1 3/8" (35 mm) e 1 3/4" (44 mm).
2. Verify the backset measurement (distance from door edge to center of bore hole) is either 2-3/8" (60mm) or 2-3/4" (70mm). Adjust the latch if necessary.

Instalando a trava

1. Insert the latch into the door edge, ensuring the bolt faces the correct direction for your door swing. The word "TOP" on the latch should face upwards.
2. Fixe a trava com os parafusos fornecidos.

Instalando o conjunto externo

1. Align the exterior deadbolt assembly with the bore hole, ensuring the tailpiece passes through the latch mechanism.
2. Posicione o conjunto externo rente à porta.

Image showing the exterior side of the deadbolt with the keyhole and Weiser branding, ready for installation.

Instalando o conjunto interno

1. Place the interior mounting plate over the tailpiece and secure it to the exterior assembly with the provided screws.
2. Attach the interior thumbturn assembly to the mounting plate, ensuring the thumbturn engages with the tailpiece.

Image showing the interior side of the deadbolt with the thumbturn lever, which controls the lock from inside.

Instalando a placa de ataque

1. Align the strike plate with the latch bolt on the door frame. Mark and chisel out the area for the strike plate if necessary to ensure a flush fit.
2. Secure the strike plate with the provided screws. Test the deadbolt operation to ensure smooth locking and unlocking.

Instruções de operação

Travando a fechadura

• Vista de fora: Insert the key into the keyway and turn it clockwise until the bolt extends fully into the strike plate. Remove the key.
• Do interior: Rotate the thumbturn lever clockwise until the bolt extends fully into the strike plate.

Destrancando a fechadura

• Vista de fora: Insert the key into the keyway and turn it counter-clockwise until the bolt retracts fully. Remove the key.
• Do interior: Rotate the thumbturn lever counter-clockwise until the bolt retracts fully.

SmartKey Re-key Technology

The SmartKey re-key technology allows you to re-key the lock quickly and easily by yourself. This feature is useful if you have recently moved, lost keys, or wish to use one key for multiple Weiser SmartKey locks.

1. Insira a chave que está funcionando e gire-a 90 graus no sentido horário.
2. Insira a ferramenta SmartKey completamente e firmemente no orifício SmartKey.
3. Remove the SmartKey tool and the functioning key.
4. Insira a nova chave completamente e firmemente na ranhura da fechadura.
5. Turn the new key 180 degrees counter-clockwise. Your lock is now re-keyed.

Diagram showing the steps for using SmartKey technology to re-key the deadbolt, including where to insert the reset tool and the key.

Manutenção

• Clean the lock periodically with a soft, damp pano. Evite produtos de limpeza abrasivos, solventes ou produtos químicos agressivos, pois podem danificar o acabamento.
• Do not lubricate the cylinder with oil-based lubricants. If lubrication is necessary, use a graphite-based lubricant sparingly.
• Periodically check and tighten all mounting screws to ensure the deadbolt remains securely installed and operates smoothly.

Solução de problemas

Especificações

• Marca: Salgueiro
• Nome do modelo: Elements Square Deadbolt with SmartKey, Matte Black
• Número da peça: 9GDC94710-063
• Terminar: Preto fosco
• Material: Metal
• Tipo de bloqueio: Key Lock (Single Cylinder)
• Compatibilidade com espessura da porta: 1 3/8" (35 mm) a 1 3/4" (44 mm)
• Certificação: Certificado ANSI/BHMA Grau 3
• Características especiais: SmartKey Technology, Universal Fitment (reversible for right/left-handed doors), ADA Compliant, Limited Lifetime Warranty
• Dimensões do item (C x L x A): 4.52 x 4.52 x 9.05 polegadas (dimensões aproximadas da embalagem)
• Peso do item: 1.4 libras

Informações de garantia

The Weiser Elements Square Single Cylinder Deadbolt is backed by a Limited Lifetime Warranty. This warranty covers mechanical and finish defects under normal use. For complete details regarding warranty coverage, terms, and conditions, please refer to the official Weiser website or contact their customer support department directly.

Suporte ao cliente

For further assistance, technical support, or to inquire about replacement parts for your Weiser Elements Square Single Cylinder Deadbolt, please utilize the following resources:

• Oficial Website: Visita www.weiserlock.com for product information, FAQs, and support documentation.
• Informações de contato: Refer to the Weiser website for regional customer service phone numbers and email contact options.