1. Introdução
Thank you for choosing the MOUNTUP Single Computer Monitor Stand. This full motion gas spring desk monitor arm is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor. It is compatible with most flat and curved computer monitors from 17 to 32 inches, supporting a maximum weight of 17.6 lbs. This manual will guide you through the installation, operation, and maintenance of your new monitor mount.
2. Informações de segurança
Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage. If you have any questions, please contact MOUNTUP customer support.
- Não exceda a capacidade máxima de peso de 17.6 kg (8 lbs).
- Certifique-se de que a superfície da mesa seja estável e resistente o suficiente para suportar o peso combinado do suporte e do monitor.
- Always keep the arm in a horizontal position during gas spring tension adjustment to prevent injury or damage.
- Use all provided hardware and follow the installation steps precisely.
- Mantenha crianças e animais de estimação afastados durante a instalação.
3. Lista de embalagem
Verifique se todos os componentes estão presentes e sem danos antes de iniciar a instalação.
Figure 3.1: Key features and compatibility of the MOUNTUP monitor mount.
O pacote deve incluir:
- Monitor Arm Assembly (Upper and Lower Arms)
- Poste de mesa
- C-Clamp Base
- Componentes da base do ilhó
- Placa VESA
- All necessary screws, washers, and Allen keys
- Manual de instruções
4. Configuração e instalação
Escolha entre C-Clamp or Grommet mounting based on your desk type and preference.
Figure 4.1: The monitor mount offers both C-Clamp e opções de montagem com ilhós.
4.1 C-Clamp Instalação
- Anexe o C-clamp base to the desk pole using the provided screws and Allen key.
- Position the assembled clamp and pole on the edge of your desk.
- Aperte o C-clamp screw until the mount is securely fastened to the desk. Ensure it is stable and does not wobble.
4.2 Grommet Installation
- Desmonte o C-clamp by removing the screw and plate.
- Insert the desk pole through the grommet hole in your desk.
- Secure the pole from underneath the desk using the grommet base plate and tightening knob.
4.3 Fixação da placa VESA ao monitor
- Coloque cuidadosamente o monitor com a tela virada para baixo sobre uma superfície macia e limpa.
- Alinhe a placa VESA com os orifícios de montagem na parte traseira do seu monitor (75x75mm ou 100x100mm).
- Secure the VESA plate to the monitor using the appropriate screws. Do not overtighten.
4.4 Fixação do monitor ao braço
- Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
- Ensure the monitor is fully seated and then tighten the security bolt to prevent accidental detachment.
4.5 Gerenciamento de cabos
Route your monitor cables through the integrated cable management clips on the arm and pole to maintain a tidy workspace.
Figure 4.2: Effective cable management keeps your desk organized.
4.6 Guia de Instalação em Vídeo
Video 4.1: A detailed installation guide for the MOUNTUP Single Monitor Mount (MU0025).
5. Operação e Ajustes
The MOUNTUP monitor arm offers full motion capabilities for optimal viewconforto.
Figure 5.1: The monitor arm provides extensive adjustability for ergonomic positioning.
5.1 Ajuste da tensão da mola a gás
Adjust the gas spring tension to match your monitor's weight for smooth and stable positioning. Keep the arm in a horizontal position during adjustment.
Figure 5.2: Adjusting the gas spring tension for optimal monitor support.
- If the arm shoots up: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
- If the arm falls down: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.
5.2 Ajuste de inclinação
The monitor can tilt +90° (up) and -45° (down) to reduce glare and optimize viewângulos de inclinação.
- Loosen the tilting bolt on the VESA plate.
- Position the screen to your desired angle.
- Retighten the tilting bolt to fix the angle.
5.3 Swivel and Rotation
The arm allows for extensive swivel and 360° rotation for landscape or portrait orientation.
Figure 5.3: Achieve perfect viewing angles with 360-degree rotation.
- Lower Arm Swivel: ±135°
- Upper Arm Swivel: ±180°
- Screen Swivel: ±90°
- Screen Rotation: 360°
5.4 Adjustment Video Guide
Video 5.1: Guide to Gas Spring Tension & Tilting Adjustment for MOUNTUP Monitor Mount (MU0025).
Video 5.2: Demonstration of the MOUNTUP Single Monitor Desk Mount (MU0025) functions.
6. Manutenção
A manutenção regular garante a longevidade e o desempenho ideal do seu suporte de monitor.
- Limpeza: Limpe a montagem com um pano macio e seco.amp pano. Evite produtos de limpeza abrasivos ou solventes que possam danificar o acabamento.
- Inspeção: Verifique periodicamente todos os parafusos e conexões para garantir que estejam firmes e seguros. Reaperte-os, se necessário.
- Mola a gás: If the gas spring tension feels off, refer to Section 5.1 for adjustment instructions.
7. Solução De Problemas
Caso encontre algum problema, consulte os problemas e soluções comuns a seguir:
- Monitor arm falls down or shoots up: This indicates incorrect gas spring tension. Refer to Section 5.1 for proper adjustment based on your monitor's weight.
- Monitor tilts forward or backward unexpectedly: The tilting bolt may be loose. Refer to Section 5.2 to loosen, adjust, and retighten the tilting bolt.
- A montagem parece instável ou bamba: Certifique-se de que o C-clamp or grommet base is securely tightened to the desk. Check all connection points on the arm and VESA plate.
- Difficulty moving the arm: The tension might be too high for a lighter monitor, or the joints might need lubrication (though typically not required for gas spring arms). Ensure no cables are snagged.
Caso os problemas persistam, entre em contato com o suporte ao cliente.
8. Especificações
| Recurso | Especificação |
|---|---|
| Número do modelo | MU0025 |
| Tamanho da tela compatível | 17 a 32 polegadas |
| Capacidade de peso | 4.4 - 17.6 libras (2 - 8 kg) |
| Compatibilidade VESA | 75x75mm, 100x100mm |
| Tipo de montagem | C-Clamp / Grommet Base |
| C-Clamp Espessura da mesa | 0.39" - 3.15" (10-80 mm) |
| Espessura da mesa com ilhós | 0.39" - 3.15" (10-80 mm) |
| Diâmetro do furo do ilhó | 0.39" - 2.36" (10-60 mm) |
| Material | Aço, Alumínio, Plástico |
| Cor | Preto |
| Max Height (from desk) | 22.64" (57.5 cm) |
| Extensão máxima | 19.8" (50.3 cm) |
| Faixa de inclinação | +90° / -45° |
| Rotação da tela | ±90° |
| Rotação da tela | 360° |
9. Garantia e Suporte
All MOUNTUP monitor mounts are backed by 3-year support. Our friendly customer support team is available to answer any questions within 12 hours. For assistance, please visit the official MOUNTUP website or contact us directly through your purchase platform.
