hygger HG957 Auto On Off LED Aquarium Light Instruction Manual

1. Introdução

This manual provides detailed instructions for the installation, operation, and maintenance of your hygger HG957 Auto On Off LED Aquarium Light. This light fixture is designed to provide optimal lighting conditions for freshwater aquariums and planted tanks, featuring programmable 24-hour light cycles, dimmable 7-color full spectrum LEDs, and a built-in timer with sunrise and sunset functions.

2. Instruções de segurança

• Always unplug the light fixture from the power outlet before performing any maintenance or cleaning.
• Ensure your hands are dry when handling the power adapter and light fixture.
• Do not operate the light if any part is damaged, especially the power cord or adapter.
• This product is designed for indoor use only. Do not expose to extreme temperatures or direct sunlight.
• Mantenha fora do alcance de crianças.
• The light fixture is IP68 water-resistant, meaning it is protected against immersion in water up to 1.5 meters for up to 30 minutes. However, the power adapter is not waterproof.

3. Conteúdo da embalagem

• 1 x hygger HG957 Aquarium Light Body
• 1 x Adaptador de fonte de alimentação
• 2 x Adjustable Metal Mounting Legs

4. Produto acabadoview

The hygger HG957 features an integrated timer control panel for easy programming. The light bar contains a combination of 6500K White, 450-455nm Blue, 620-625nm Red, 520-525nm Green, and RGB LEDs to provide a full spectrum for plant growth and vibrant fish colors.

Image: Integrated Timer Control Panel with labels for 12 Hours Local Time, Daylight Mode, Set/Save Button, Increase Button, Decrease Button, Power/Light Mode, Second, and Moonlight Mode. Also shows 10 Levels of Intensities and 6 Single-Color + White Lighting options.

5. Configuração

5.1 Montagem da luminária

Attach the adjustable metal mounting legs to both ends of the light fixture. Place the light fixture on top of your aquarium, ensuring the legs are securely resting on the tank edges. The adjustable legs allow the light to fit aquariums with widths between 36 and 42 inches.

Image: The hygger aquarium light shown with its adjustable metal mounting legs extended, ready to be placed on an aquarium.

5.2 Conexão de energia

Connect the power supply adapter to the light fixture and then plug the adapter into a suitable power outlet. The light will turn on in auto cycle mode by default.

Image: The hygger aquarium light is shown installed on top of a freshwater planted tank, illuminating the aquatic environment.

6. Instruções de operação

6.1 Configurar a hora local

Before programming any light cycles, set the current local time on the control panel. Refer to the video below for a visual guide on how to set the local time.

6.2 Standard Mode (Daylight & Moonlight Cycle)

The default auto cycle simulates a natural 24-hour light cycle with gradual sunrise, midday, sunset, and night phases. The white daylight mode combines white, red, green, and blue LEDs for bright illumination. The moonlight mode offers 6 single-colored options (red, purple, blue, cyan, green, yellow) and 10 dimmable levels.

Image: Diagram illustrating the Daylight Mode with Sunrise and Sunset functions, showing a gradual turn on/off over 15 minutes to prevent light shock to fish.

Image: Diagram illustrating the Moonlight Mode with 6 single-colored lighting options, showing a gradual ramp-up and down in the first and last 15 minutes.

6.3 Modo Faça Você Mesmo

The DIY mode allows for custom scheduling of light intensity and color for up to 8 separate time slots (L1-L8). Sections L1 to L6 are for full spectrum light, while L7 and L8 are for blue light. To turn off the light during a specific slot, set the intensity to 00.

Image: Diagram explaining the DIY Mode with 8 separated light stages (L1-L8), showing customizable begin and end times, and light intensity for each stage.

For detailed instructions on programming the DIY mode, please refer to the video below:

6.4 Fine Tuning Color Temperature

You can fine-tune the color temperature by pressing the bulb button twice. The middle array of RGB LEDs will change to other colors, allowing for customized color combinations and lighting presets.

Image: Close-up of the light bar showing various colored LEDs (red, green, blue, white) and a finger pressing the bulb button on the control panel, indicating the fine-tuning of color temperature.

7. Manutenção

7.1 Limpeza

Regularly clean the light fixture to ensure optimal performance. Wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the light is unplugged before cleaning.

7.2 Resistência à água

The light fixture has an IP68 water-resistant rating, meaning it is protected against dust and the effects of continuous immersion in water. This provides protection against splashes and accidental water drops, but it is not designed for prolonged underwater use.

Image: A close-up of the light fixture with water droplets on its surface, highlighting its IP68 water-resistant rating.

8. Solução De Problemas

• Luz não acende: Verifique as conexões de energia. Certifique-se de que o adaptador esteja firmemente conectado tanto à lâmpada quanto à tomada.
• Timer not working correctly: Verify the local time is set accurately. Re-program the daylight and moonlight cycles if necessary.
• Configurações perdidas após desligamentotage: The light has a memory function for settings but may require resetting the local time after a power interruption.
• Inconsistent light intensity: Ensure the light is not in DIY mode with incorrect intensity settings. Check for any physical obstructions or damage to the LEDs.

9. Especificações

10. Garantia e Suporte

Your hygger HG957 LED Aquarium Light comes with a manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical support, or any questions regarding your product, please contact hygger customer service through the retailer where you purchased the product or visit the official hygger website para informações de contato.