Strymon Sunset Dual Overdrive Pedal

Introdução

The Strymon Sunset is a versatile dual overdrive pedal designed to provide a wide range of classic overdrive and distortion tones. It features two independent channels, A and B, each offering distinct overdrive circuits, allowing for flexible tone shaping and stacking options. This manual provides detailed instructions on setting up, operating, and maintaining your Sunset pedal.

Configurar

Follow these steps to properly set up your Strymon Sunset pedal:

1. Conexão de energia: Connect a standard 9V DC power supply (center-negative, 200mA minimum) to the 9 VCC input jack on the rear panel. Ensure the power supply meets the specified voltage requisitos atuais.
2. Conexão de entrada: Conecte sua guitarra ou outro instrumento ao IN jack on the rear panel using a standard 1/4-inch instrument cable.
3. Conexão de saída: Conecte o FORA jack on the rear panel to your ampConecte o amplificador ou o próximo pedal na sua cadeia de sinal usando um cabo de instrumento padrão de 1/4 de polegada.
4. Conexões Opcionais:
   • Expression Pedal (EXP): For real-time control over parameters, connect an expression pedal to the EXP Jack.
   • Favorite Switch (FAV): Connect an external favorite switch to the FAV jack to recall a saved preset.

Figure 1: Rear panel connections of the Strymon Sunset pedal. This view highlights the IN, OUT, FAV, EXP, and 9VDC power input jacks, along with the B->A and A+B switches.

Instruções de operação

The Strymon Sunset features two independent overdrive channels, A and B, each with unique voicings and controls. Understanding these controls is key to unlocking the pedal's full potential.

Figure 2: Top panel controls of the Strymon Sunset pedal. This image displays the LEVEL, DRIVE, and TONE knobs for both channels, along with the A and B circuit type switches and footswitches.

Controles do painel frontal

• Channel A Controls:
  • LEVEL A: Adjusts the output volume of Channel A.
  • DRIVE A: Controls the amount of gain/overdrive for Channel A.
  • TONE A: Shapes the tonal character of Channel A, typically acting as a high-cut filter.
  • A Circuit Switch: Selects between three distinct overdrive circuits for Channel A:
    • Ge (Germanium): Smooth, warm, and dynamic overdrive, reminiscent of classic germanium diode circuits.
    • Texas: Mid-focused, bluesy overdrive with a distinct character.
    • Agudos: A treble booster circuit, ideal for pushing an already overdriven amp or adding sparkle.
• Channel B Controls:
  • LEVEL B: Adjusts the output volume of Channel B.
  • DRIVE B: Controls the amount of gain/overdrive for Channel B.
  • TONE B: Shapes the tonal character of Channel B.
  • B Circuit Switch: Selects between three distinct overdrive circuits for Channel B:
    • 2 Stage: A classic two-stage soft-clipping overdrive.
    • Duro: A harder clipping overdrive with increased compression and sustain.
    • JFET: A JFET-based circuit offering a more amp-like, natural overdrive.
• Pedais:
  • Um pedal: Engages or bypasses Channel A. The corresponding LED indicates its status.
  • B Pedal: Engages or bypasses Channel B. The corresponding LED indicates its status.

Interruptores do painel traseiro

• B->A / A+B Switch: This switch determines the stacking order when both channels are engaged:
  • B->A: Channel B feeds into Channel A. This is useful for boosting Channel A with Channel B's gain.
  • A + B: Channels A and B run in parallel. This allows for blending the two distinct tones.
• Interruptor BRIGHT: A global switch that adds a subtle high-end boost to the overall output.
  • +: Engages the bright boost.
  • -: Disengages the bright boost.

Manutenção

To ensure the longevity and optimal performance of your Strymon Sunset pedal, follow these maintenance guidelines:

• Limpeza: Use a soft, dry cloth to wipe down the pedal's enclosure. Avoid using abrasive cleaners or solvents, as they may damage the finish or internal components.
• Armazenar: Guarde o pedal em local fresco e seco, longe da luz solar direta, temperaturas extremas e alta umidade.
• Fonte de energia: Always use a regulated 9V DC center-negative power supply that meets the pedal's current requirements (200mA minimum). Using an incorrect power supply can damage the unit and void the warranty.
• Conexões: Verifique periodicamente todas as conexões dos cabos quanto a desgaste. Certifique-se de que as tomadas estejam livres de poeira e detritos.

Solução de problemas

If you encounter issues with your Strymon Sunset pedal, refer to the following common problems and solutions:

Especificações

Garantia e Suporte

Strymon products are built with high-quality components and undergo rigorous testing. For information regarding warranty coverage, product registration, and technical support, please visit the official Strymon webou entre em contato com o departamento de atendimento ao cliente. Guarde o comprovante de compra como prova para eventuais solicitações de garantia.

Strymon Official Website: www.strymon.net