Introdução
The Browning Solar Battery Pack 12 Volt (Model BTC SBP12) is designed to provide supplemental power to your Browning Trail Camera, extending its operational life in the field. This unit features an integrated solar panel that recharges its internal batteries, which then supply power to your connected trail camera. It is compatible with all Browning Trail Camera models and includes six rechargeable batteries for immediate use.
Informações de segurança
AVISO: Este produto contém produtos químicos conhecidos no estado da Califórnia por causar câncer e defeitos congênitos ou outros danos reprodutivos.
- Do not expose the unit to extreme temperatures or direct flame.
- Assegure-se de que a ventilação esteja adequada durante o carregamento.
- Não tente desmontar ou modificar a unidade.
- Mantenha fora do alcance de crianças.
Conteúdo da embalagem
- Browning Solar Battery Pack (BTC SBP12)
- 6 Rechargeable Batteries (pre-installed or separate)
- Correia de montagem
- Power Cable for connecting to trail camera
Produto acimaview
Configurar
- Instale as baterias: Open the battery compartment on the back of the solar panel unit (refer to Figure 2). Insert the six included rechargeable batteries, ensuring correct polarity. Close the compartment securely.
- Local de montagem: Select a location that receives maximum direct sunlight throughout the day. Avoid areas with heavy shade from trees or buildings.
- Attach to Tree/Post: Use the provided mounting strap to securely attach the solar battery pack to a tree or post (refer to Figure 5). Ensure the unit is stable and will not shift in wind or adverse weather.
- Ajustar o ângulo do painel solar: Utilize the adjustable mounting bracket to angle the solar panel directly towards the sun for optimal charging efficiency. The panel should be angled to capture the most sunlight during peak hours.
- Connect to Trail Camera: Connect the power cable from the solar battery pack to the external power input port on your Browning Trail Camera (refer to Figure 6). Ensure the connection is firm and secure.
Note: The solar battery pack is designed to provide supplemental power to your trail camera. It charges its own internal rechargeable batteries, which then power the camera. It does NOT directly recharge the batteries inside your trail camera. It is recommended to have batteries installed in your trail camera as a backup power source.
Instruções de operação
- Ligar: Locate the ON/OFF switch on the side control panel (refer to Figure 4). Slide the switch to the 'ON' position.
- Status da bateria: The LED indicator lights on the control panel (Figure 4) will show the current charge level of the internal rechargeable batteries. Monitor these lights to ensure adequate power.
- Carregamento solar: Once powered on and exposed to sunlight, the solar panel will automatically begin charging its internal batteries. Ensure the panel is clean and unobstructed for optimal performance.
- Operação da câmera: With the solar battery pack connected and powered on, your trail camera will draw power from the solar unit, preserving its internal batteries.
Manutenção
- Limpeza: Limpe periodicamente a superfície do painel solar com um pano macio e seco.amp cloth to remove dirt, dust, or debris that may hinder charging efficiency. Do not use abrasive cleaners.
- Verificação da bateria: While the internal batteries are rechargeable, their capacity may diminish over time. If you notice reduced performance, consider replacing the six internal rechargeable batteries.
- Inspeção de cabos: Regularly inspect the power cable and connectors for any signs of wear, damage, or corrosion. Replace if necessary to ensure a reliable connection.
- Segurança de montagem: Check the mounting strap and bracket periodically to ensure the unit remains securely attached and properly angled.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Solar panel not charging internal batteries. | Insufficient sunlight; dirty solar panel; faulty internal batteries. | Relocate unit to a sunnier spot; clean solar panel surface; check/replace internal rechargeable batteries. |
| Trail camera not receiving power from solar unit. | Solar unit is off; power cable is loose/damaged; internal batteries are depleted; solar unit is faulty. | Ensure solar unit is ON; check cable connection; allow solar unit to charge in sunlight; test with fully charged internal batteries. |
| One or more included rechargeable batteries are dead. | Manufacturing defect or prolonged storage. | Replace the faulty battery/batteries with new rechargeable ones of the same type and capacity. |
| Confusion regarding camera battery charging. | Misunderstanding of product function. | The solar panel charges its ter internal batteries, which then power the camera. It does não recharge batteries placed inside the trail camera itself. |
Especificações
| Recurso | Detalhe |
|---|---|
| Marca | Escurecimento |
| Nome do modelo | BTC SBP12 |
| Descrição | Solar Battery Pack 12 Volt |
| Material | Outro |
| Peso do item | 2.04 libras (0.93 quilogramas) |
| Eficiência | Alta Eficiência |
| Tipo de conector | MC4 |
| Vol Máximotage | 12 Volts |
| Componentes incluídos | Trail Cam Solar Battery (with 6 rechargeable batteries) |
| Dimensões do item (CxLxA) | 3.5 x 9.5 x 11 polegadas |
| Cor | Camuflagem |
| UPC | 855121008424 |
Garantia e Suporte
For warranty information and technical support, please contact the manufacturer directly. The warranty description states: "Contact manufacturer".
It is recommended to visit the official Browning webPara obter os detalhes de suporte mais atualizados, acesse o site ou consulte as informações de contato fornecidas com sua compra.
