Manual de Instruções do Fone de Ouvido Bluetooth para Motocicleta LEXIN ET-COM

1. Introdução

The LEXIN ET-COM is a Bluetooth 5.0 motorcycle helmet communication system designed for riders who wish to stay connected while on the road. This device supports hands-free calling, music streaming, FM radio, voice assistant integration, and a 2-way intercom system with advanced noise cancellation. It is built to withstand various weather conditions, ensuring reliable performance.

2. Conteúdo da embalagem

The LEXIN ET-COM package includes the following items:

• Main Unit (ET-COM device)
• Hi-Fi Speakers with Boom and Button Microphones
• Suporte de Montagem de Metal
• 3M Double-Sided Adhesive Mounting Bracket
• Cabo de carregamento USB Tipo-C
• Allen Wrench and Screws
• Almofadas de alto-falante
• Interchangeable Face Plates (6 colors: Grey, Black, Green, Red, Yellow, Blue)
• Manual do usuário e guia de início rápido

Imagem: Detalhada view of all items included in the LEXIN ET-COM package, including the main unit, speakers, microphones, mounting options, charging cable, and interchangeable face plates.

Video: LEXIN Motorcycle Bluetooth ET-COM Unboxing. This video demonstrates the unboxing process and showcases all components included in the product package.

3. Configuração e instalação

Proper installation ensures optimal performance and comfort. Follow these steps to install your ET-COM headset on your helmet.

3.1. Helmet Preparation

It is recommended to remove the inner padding of your helmet before installation to facilitate cable routing and speaker placement. The padding can be reinstalled once the components are secured.

3.2. Montagem da unidade principal

Choose between the metal clamp bracket or the 3M adhesive bracket based on your helmet type and preference. The metal clamp offers a more secure fit, while the adhesive bracket is suitable for helmets where the clamp não pode ser usado.

1. Using the Metal Clamp Suporte: Loosen the screws on the metal bracket. Slide the bracket between the outer shell and inner padding of your helmet on the left side. Tighten the screws using the provided Allen wrench until the bracket is firmly secured.
2. Using the 3M Adhesive Bracket: Clean the desired mounting area on the left side of your helmet. Peel off the red protective layer from the 3M adhesive. Firmly press the adhesive bracket onto the helmet surface for at least 30 seconds. Allow 24 hours for the adhesive to fully cure before attaching the main unit.
3. Once the bracket is installed, slide the main ET-COM unit onto the bracket until it clicks securely into place.

3.3. Instalação de alto-falantes e microfone

The ET-COM includes two Hi-Fi speakers and two types of microphones (boom and button) for different helmet styles.

1. Posicionamento do alto-falante: Attach the Velcro pads (if needed) to the inside of your helmet's ear pockets. Peel off the white protective layer from the speaker's Velcro backing and firmly press each speaker into the ear pockets. Ensure they are positioned directly over your ears for optimal audio.
2. Seleção de microfone:
   • Para open-face or modular helmets, use o microfone boom. Attach it to the inside of the helmet near your mouth using the adhesive pad.
   • Para full-face helmets, use o microfone de botão. This microphone can be discreetly placed inside the helmet's chin bar area.
3. Gerenciamento de cabos: Route all speaker and microphone cables neatly under the helmet's inner padding to prevent discomfort and ensure they are not exposed. Reinstall the helmet's inner padding.
4. Connect the speaker and microphone cables to the corresponding ports on the main ET-COM unit. Ensure a firm connection to maintain the waterproof seal.

Image: Diagram illustrating the easy installation steps for the LEXIN ET-COM headset on a helmet, showing bracket, speaker, and microphone placement.

Video: LEXIN Motorcycle Bluetooth ET-COM Installation. This video provides a step-by-step guide on how to install the ET-COM headset, speakers, and microphone into a motorcycle helmet.

4. Instruções de operação

4.1. Ligar/desligar

• Ligar: Press and hold the FM button and the Intercom button simultaneously for a few seconds until a blue light flashes.
• Desligar: Press and hold the FM button and the Intercom button simultaneously for a few seconds until the lights turn off.

4.2. Emparelhamento Bluetooth (Telefone)

1. Ensure the ET-COM unit is powered off.
2. Press and hold the Phone button until the LED indicator flashes red and blue alternately, indicating pairing mode.
3. On your mobile phone, enable Bluetooth and search for "LEXIN ET-COM" in the list of available devices.
4. Select "LEXIN ET-COM" to connect. The LED indicator on the ET-COM will flash blue slowly once successfully paired.

4.3. Dual Phone Pairing

The ET-COM supports connecting to two mobile phones simultaneously. Follow the same pairing steps (Section 4.2) for the second phone. The device will manage connections to both phones.

4.4. Phone Call Functions

• Atender chamada: Press the Phone button once, or wait approximately 7 seconds for automatic answering.
• Encerrar chamada: Pressione o botão do telefone uma vez.
• Rejeitar chamada: Pressione e segure o botão Telefone por 2 segundos.
• Rediscar último número: Double-click the Phone button.
• Activate Voice Assistant (Siri/S Voice): Double-click the Phone button to activate your phone's voice assistant.

4.5. Reprodução de música

• Reproduzir/Pausar: Pressione o botão do telefone uma vez.
• Próxima faixa: Pressione o botão Aumentar volume uma vez.
• Faixa anterior: Pressione o botão Diminuir volume uma vez.
• Aumentar o volume: Pressione e mantenha pressionado o botão de aumentar o volume.
• Volume baixo: Pressione e segure o botão Diminuir volume.

4.6. Rádio FM

• Ligar/Desligar Rádio FM: Press the FM button once.
• Próxima estação: Pressione o botão Aumentar volume uma vez.
• Estação Anterior: Pressione o botão Diminuir volume uma vez.

4.7. Intercom Pairing (Device-to-Device)

The ET-COM supports 2-way intercom communication between two LEXIN ET-COM devices.

1. Ensure both ET-COM units are powered on.
2. On both units, press and hold the Intercom button until the LED indicators flash red and blue alternately, indicating pairing mode.
3. On one of the units, press the Intercom button once. The unit will start searching for the other device.
4. Once paired, both units' LED indicators will flash blue slowly, and you will hear a confirmation tone.
5. To start intercom conversation, press the Intercom button once on either unit. To end, press the Intercom button once again.

Image: Illustration showing two riders communicating via LEXIN ET-COM intercom over a distance of up to 1200 meters (0.8 miles).

Video: LEXIN Motorcycle Intercom ET-COM Instruction. This video demonstrates various operational aspects including phone pairing, call handling, music control, and intercom usage.

4.8. Emparelhamento Universal

The LEXIN ET-COM is designed with universal pairing capabilities, allowing it to connect with most Bluetooth headsets from other brands. To pair with a non-LEXIN device, ensure both devices are in pairing mode according to their respective manuals, then initiate pairing from the ET-COM unit as described in Section 4.7.

Image: Visual representation of the LEXIN ET-COM's universal pairing feature, showing connection to another brand's headset.

5. Manutenção

• Limpeza: Use um pano macio e macioamp cloth to clean the ET-COM unit. Avoid harsh chemicals or abrasive cleaners.
• Carregamento: Charge the device using the provided USB Type-C cable. A full charge takes approximately 1.5 hours.
• Armazenar: Guarde o dispositivo em local fresco e seco quando não estiver em uso.
• Resistência à água: The ET-COM is IP67 waterproof, meaning it is protected against dust and can withstand immersion in water up to 1 meter for 30 minutes. Ensure the charging port is securely closed when not charging to maintain water resistance.

Image: The LEXIN ET-COM unit shown in a wet environment, highlighting its IP67 waterproof rating, suitable for use in rain.

Image: Visual representation of the LEXIN ET-COM's 800mAh battery, indicating 300 hours standby time, 15 hours music time, and 1.5 hours charging time.

6. Solução De Problemas

7. Especificações

• Versão Bluetooth: 5.0
• Alcance do Intercom: Up to 1200 meters (0.8 miles) for 2 riders
• Capacidade da bateria: Íon de lítio 800mAh
• Tempo de conversação: Até 8 horas
• Music Streaming Time: Até 15 horas
• Tempo de espera: Até 300 horas
• Tempo de carregamento: Aproximadamente 1.5 horas
• Resistência à água: IP67 (à prova d'água)
• Cancelamento de ruído: DSP & CVC Advanced Noise Cancellation
• Características especiais: FM Radio, Voice Dial (Siri/S Voice), Universal Pairing, Interchangeable Color Housings
• Peso do item: 0.15 quilogramas (5.3 onças)
• Dimensões do produto: 3.74 x 1.73 x 0.9 polegadas

Image: Diagram illustrating the DSP & CVC advanced noise cancellation technology of the LEXIN ET-COM, showing how external noise is copied and canceled.

8. Customization: Interchangeable Face Plates

The LEXIN ET-COM offers interchangeable face plates in 6 different colors (Grey, Black, Green, Red, Yellow, Blue) to match your helmet or personal style. To change the face plate:

1. Locate the small hole on the underside of the main unit.
2. Insert the provided pin into the hole and gently push to release the current face plate.
3. Select your desired color face plate and align it with the main unit.
4. Press firmly until it clicks into place, ensuring it is securely attached.

Image: Display of the LEXIN ET-COM unit with various interchangeable 6-color face plates, allowing customization to match different helmets or preferences.

Image: Step-by-step visual guide on how to open the case using a pin and press to attach a new interchangeable face plate on the LEXIN ET-COM unit.

9. Garantia e Suporte

For warranty information, technical support, or further assistance, please refer to the official LEXIN website or contact their customer service directly. Details can be found in the User Manual included in your package.