Autopilot APCET2 Advanced Day & Night Cooling or Heating Thermostat User Manual

1. Introdução

The Autopilot APCET2 is a versatile temperature controller designed for both cooling and heating applications. It features automatic day and night set points, detected by a built-in photocell, allowing for precise temperature management. Easy-to-use knobs facilitate setting adjustments, and a Memory-lock feature ensures consistent performance by preventing accidental changes to set points.

Principais características:

• Controls heating or cooling equipment with both day/night set points.
• Includes a 20-foot remote precision temperature sensor.
• Temperature control differential of +/- 3°F.
• Built-in photocell for automatic day/night detection.
• Temperature control range: 50°F–100°F (10°C–38°C).
• Electric power source.

2. Informações de segurança

Leia e compreenda todas as instruções de segurança antes de utilizar este dispositivo. O não cumprimento destas instruções pode resultar em choque elétrico, incêndio ou ferimentos graves.

• Somente para uso interno: This device is intended for indoor use in dry locations. Do not expose to water or high humidity.
• Classificação elétrica: Ensure the connected device's electrical rating does not exceed the thermostat's maximum load (1800 watts, 15 amps at 120V AC).
• Aterramento adequado: Always plug the thermostat into a properly grounded 3-prong outlet.
• Evite sobrecarga: Do not plug multiple high-power devices into the thermostat using a power strip or adapter.
• Colocação do Sensor: Position the temperature sensor away from direct heat sources, cold drafts, or direct sunlight to ensure accurate readings.
• Limpeza: Disconnect power before cleaning. Use a dry cloth; do not use liquid cleaners.
• Crianças e animais de estimação: Mantenha o dispositivo fora do alcance de crianças e animais de estimação.

3. Produto acabadoview

The Autopilot APCET2 thermostat features a user-friendly design with clearly labeled controls and indicators.

Frente View:

Figura 3.1: Frente view of the Autopilot APCET2 thermostat. This image displays the main control panel, including the two temperature setting knobs, the day/night mode switch, the heating/cooling mode switch, and the integrated power outlet for connecting your device. The "ON" and "POWER" indicator lights are also visible.

• Day/Night Temperature Knobs: Two separate knobs for setting desired temperatures for day and night cycles.
• Day/Night Mode Switch: Toggles between 24-hour operation or automatic day/night detection via photocell.
• Heating/Cooling Mode Switch: Selects whether the thermostat controls a heating or cooling device.
• Tomada elétrica integrada: Where the controlled device is plugged in.
• Luz indicadora de energia: Illuminates when the unit is receiving power.
• Luz indicadora de saída: Illuminates when power is being supplied to the connected device.

Voltar View:

Figura 3.2: Voltar view of the Autopilot APCET2 thermostat. This image shows the standard 3-prong power plug for connecting the thermostat to a wall outlet, along with the screws for potential wall mounting.

• Plugue de energia: Standard 3-prong plug for connecting to a 120V AC wall outlet.
• Furos de montagem: For optional wall mounting.

Dimensões:

Figura 3.3: Dimensions of the Autopilot APCET2 thermostat. The image indicates the device measures approximately 3 inches deep, 2.25 inches wide, and 5 inches high.

4. Instruções de configuração

1. Desembale o dispositivo: Carefully remove the Autopilot APCET2 thermostat and its components from the packaging.
2. Conecte o sensor de temperatura: Plug the 20-foot remote precision temperature sensor into the designated port on the side of the thermostat. Ensure a secure connection.
3. Posicione o sensor: Place the temperature sensor in the area where you want to monitor and control the temperature. Avoid placing it in direct sunlight, near heat sources, or in drafts, as this can affect accuracy.
4. Ligue o termostato na tomada: Insert the 3-prong plug of the Autopilot APCET2 thermostat into a standard 120V AC grounded wall outlet. The Power indicator light should illuminate.
5. Conecte seu dispositivo: Plug the heating or cooling device you wish to control into the integrated power outlet on the front of the thermostat.
6. Verificação inicial: Certifique-se de que todas as conexões estejam seguras antes de iniciar a operação.

5. Instruções de operação

The Autopilot APCET2 offers flexible temperature control with day and night settings and heating/cooling modes.

5.1 Selecting Operating Mode (Heating or Cooling)

• Localize o Heating/Cooling Mode Switch on the front panel (typically marked with flame and snowflake icons).
• Deslize a chave para o ícone de chama para Modo de aquecimento. In this mode, the connected device will turn ON when the temperature drops below the set point and turn OFF when it rises above the set point (considering the +/- 3°F differential).
• Deslize a chave para o ícone de floco de neve para Modo de resfriamento. In this mode, the connected device will turn ON when the temperature rises above the set point and turn OFF when it drops below the set point (considering the +/- 3°F differential).

5.2 Setting Day and Night Temperatures

The thermostat allows for distinct day and night temperature settings.

1. Day Temperature Setting: Use o upper knob (associated with the sun icon) to set your desired daytime temperature. Rotate the knob clockwise to increase the temperature and counter-clockwise to decrease it. The range is 50°F–100°F (10°C–38°C).
2. Night Temperature Setting: Use o lower knob (associated with the moon icon) to set your desired nighttime temperature. Rotate the knob clockwise to increase the temperature and counter-clockwise to decrease it. The range is 50°F–100°F (10°C–38°C).

5.3 Day/Night Detection Mode

The thermostat can automatically switch between day and night settings using its built-in photocell.

• Localize o Day/Night Mode Switch (typically marked with a 24h icon and sun/moon icons).
• Deslize a chave para o sun/moon icon para Detecção automática de dia/noite. The built-in photocell will detect ambient light levels and automatically switch between your set day and night temperatures.
• Deslize a chave para o 24h icon para 24-Hour Operation. In this mode, the thermostat will continuously use the Configuração de temperatura diurna, regardless of light conditions.

5.4 Memory-Lock Feature

The Memory-lock feature prevents accidental changes to your set points.

• Para trancar the settings, slide the small switch next to the padlock icon to the posição travada. This will prevent the temperature knobs from being accidentally adjusted.
• Para desbloquear the settings, slide the switch to the posição destravada.

6. Manutenção

Regular maintenance ensures optimal performance and longevity of your Autopilot APCET2 thermostat.

• Limpeza: Disconnect the thermostat from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners, solvents, or immerse the unit in water.
• Cuidados com o sensor: Keep the temperature sensor clean and free from dust or debris. Ensure the sensor cable is not pinched or damaged.
• Armazenar: If storing the device for an extended period, disconnect it from power, clean it, and store it in a cool, dry place.

7. Solução De Problemas

If you encounter issues with your Autopilot APCET2 thermostat, refer to the following common problems and solutions:

Se o problema persistir após tentar essas soluções, entre em contato com o suporte ao cliente.

8. Especificações

9. Garantia e Suporte ao Cliente

For warranty information or technical assistance, please contact Autopilot customer support. Refer to the product packaging or the official Autopilot webPara obter as informações de contato mais atualizadas, acesse o site.

When contacting support, please have your product model number (APCET2) and purchase information readily available.