1. Introdução
This manual provides essential information for the proper setup, operation, and maintenance of your Bingfu Handheld Marine VHF Radio Antenna. Please read these instructions carefully before use to ensure optimal performance and longevity of your product. This antenna is designed for use with handheld marine VHF two-way radios operating within the 136-174MHz frequency range.
2. Produto acabadoview
The Bingfu Handheld Marine VHF Radio Antenna is a durable and flexible "rubber duck" style antenna featuring an SMA Male connector. It is designed for omni-directional signal reception and transmission, enhancing the communication capabilities of compatible marine VHF radios.
Figura 2.1: The antenna's flexible design allows for durability and resistance to bending.
2.1 vídeo: Demonstration of the antenna's flexibility and SMA Male connector type.
3. Especificações
| Faixa de frequência | VHF 136-174 MHz |
| ROE | < 2.0 |
| Impedância | 50 Ohm |
| Direção | Omni-direcional |
| conector de antena | SMA Masculino |
| Altura da antena | 15 cm (6 polegadas) |
| Peso líquido | 60g (per antenna) |
| Temperatura de operação | -20°C ~ +80°C |
| Temperatura de armazenamento | -30°C ~ +85°C |
| Rádios compatíveis | Standard Horizon HX210, HX870, HX890, HX300, HX380, HX40, HX280, HX290, HX370; Uniden MHS75 Handheld Floating VHF Radio |
Figura 3.1: The antenna measures approximately 15 cm (6 inches) in length.
4. Instruções de configuração
Follow these steps to properly attach the antenna to your compatible handheld marine VHF radio:
- Identificar os tipos de conectores: Ensure your radio has an SMA Female connector and the antenna has an SMA Male connector.
- Alinhar conectores: Carefully align the SMA Male connector of the antenna with the SMA Female connector on your radio.
- Antena de rosca: Gently screw the antenna onto the radio's connector in a clockwise direction. Do not overtighten, as this can damage both the antenna and the radio's connector. Tighten until snug.
- Verifique se o ajuste está seguro: Verify that the antenna is securely attached and there is no wobble.
- Optional Gasket: If provided, ensure any rubber gasket or O-ring is properly seated to maintain water resistance, especially for marine radios.
Figura 4.1: Proper connection of the SMA Male antenna to an SMA Female radio port.
4.1 vídeo: Visual guide on how to connect an SMA Male antenna to a radio with an SMA Female connector.
5. Instruções de operação
Once the antenna is securely attached, your radio is ready for operation. The antenna is omni-directional, meaning it receives and transmits signals from all directions. For optimal performance, ensure the antenna is positioned vertically and unobstructed.
- Potência de rádio: Turn on your handheld marine VHF radio.
- Seleção de canais: Select the desired VHF channel according to marine communication regulations.
- Transmissão: When transmitting, hold the radio with the antenna as vertical as possible. Avoid touching the antenna during transmission to prevent signal degradation.
- Recepção: The antenna will receive signals from all directions. For best reception, maintain a clear line of sight if possible.
6. Manutenção
Proper maintenance ensures the longevity and performance of your antenna:
- Limpeza: Clean the antenna periodically with a soft, damp tecido. Evite produtos químicos agressivos ou materiais abrasivos.
- Inspeção: Regularly inspect the antenna for any signs of damage, such as cracks in the rubber or corrosion on the connector.
- Cuidados com o conector: Keep the SMA Male connector clean and dry. If used in marine environments, consider applying a small amount of dielectric grease to the threads to prevent corrosion.
- Armazenar: Quando não estiver em uso por longos períodos, guarde a antena em local fresco e seco, longe da luz solar direta e de temperaturas extremas.
7. Solução De Problemas
If you experience issues with your antenna, consider the following common solutions:
- Sinal de recepção/transmissão deficiente:
- Ensure the antenna is securely attached to the radio.
- Verify the antenna is compatible with your radio's frequency band (VHF 136-174MHz).
- Verifique se há danos físicos na antena ou em seu conector.
- Ensure there are no obstructions blocking the antenna's signal path.
- Test the radio with a known working antenna to isolate the issue.
- Antenna Not Fitting Securely:
- Confirm that your radio has an SMA Female connector. This antenna is SMA Male.
- Inspect the threads on both the antenna and the radio for damage or debris.
8. Garantia e Suporte
Para informações sobre garantia ou suporte técnico, consulte o site oficial do fabricante. webou entre em contato diretamente com o serviço de atendimento ao cliente. Guarde o comprovante de compra como prova de aquisição.
Manufacturer: BINGFU
Modelo: BFN00506
