Produto acimaview
The Infinity Basslink Mini is a compact, powered 6x8 inch underseat subwoofer designed to deliver deep, accurate bass in a small footprint. It features a 100-watt amplifier and intelligent electronic design for reliable performance, even at high output levels. The durable die-cast aluminum enclosure minimizes size and eliminates rattles, ensuring clean audio reproduction. A wired bass volume remote control is included for convenient adjustment from the driver's seat.
Imagem: Topo view of the Infinity Basslink Mini subwoofer, showcasingraças ao seu design compacto e à grade do alto-falante.
Componentes incluídos
- 1x Underseat Subwoofer (Infinity Basslink Mini)
- 14x Parafusos
- 4x Small Metal Plates (for mounting)
- 1 x chicote de fios
- 1x Bass Volume Remote Control (with cable)
- 1x fusível de 15A
Configuração e instalação
Proper installation is crucial for optimal performance and safety. It is recommended to have this product installed by a qualified professional. Ensure the vehicle's battery is disconnected before beginning installation.
1. Escolhendo um local de montagem
The Basslink Mini is designed for underseat mounting. Select a location that allows for adequate ventilation and does not obstruct vehicle controls or passenger movement. Ensure the mounting surface is stable and secure.
Image: The Infinity Basslink Mini subwoofer with its dimensions clearly marked: 14.57 inches (width), 10.04 inches (depth), and 4.65 inches (height). This illustrates its compact size for underseat installation.
2. Conexões de fiação
Refer to the wiring diagram in the included user manual for detailed connection instructions. Key connections include:
- Alimentação (12V+): Connect directly to the vehicle's battery positive terminal via the supplied 15A fuse.
- Terra (GND): Conecte a uma superfície metálica limpa e sem pintura do chassi do veículo.
- Ativação remota (REM): Connect to the remote output of your head unit or an accessory wire that turns on with the ignition.
- Entrada de áudio: Use either the high-level inputs (speaker-level) or low-level inputs (RCA) from your head unit.
- Controle remoto de graves: Connect the wired remote to the designated port for convenient bass level adjustment.
Image: Rear panel of the Infinity Basslink Mini, displaying the various input and control connections including power, ground, remote, high-level input, low-level RCA input, gain, bass boost, low pass filter, phase, and auto turn-on switch.
3. Montagem do subwoofer
Once all wiring is connected, secure the subwoofer using the provided screws and metal plates. Ensure it is firmly attached to prevent movement during vehicle operation.
Instruções de operação
1. Initial Power-Up and Testing
After installation, reconnect the vehicle's battery. Turn on your car's audio system. The subwoofer should power on automatically if the remote turn-on is correctly connected or if the auto turn-on feature is active (for high-level inputs).
2. Ajustando os controles
- Controle de Ganho: Adjust the gain to match the output level of your head unit. Start with the gain at minimum and slowly increase it until the bass sounds balanced with the rest of your system without distortion.
- Filtro passa-baixo (LPF): This control sets the upper frequency limit for the subwoofer. Adjust it to blend smoothly with your main speakers, typically between 80Hz and 120Hz.
- Reforço de graves: Use this control to enhance the bass output at a specific frequency. Use sparingly to avoid distortion.
- Interruptor de fase: If the bass sounds weak or out of sync, try flipping the phase switch (0° or 180°). One setting will typically sound better than the other, indicating proper phase alignment with your main speakers.
- Controle remoto de graves: Use the wired remote to conveniently adjust the subwoofer's output level from your driving position.
Manutenção
The Infinity Basslink Mini requires minimal maintenance. Keep the unit clean and free from dust and debris. Do not use harsh chemicals or abrasive cleaners. Ensure all connections remain secure over time.
Solução de problemas
- Sem som:
- Check all power, ground, and remote turn-on connections.
- Verify the 15A fuse is intact.
- Ensure audio input cables (RCA or speaker-level) are securely connected.
- Confirm the head unit is powered on and sending an audio signal.
- Som distorcido:
- Reduce the gain control on the subwoofer.
- Lower the bass boost setting.
- Check the audio input signal for distortion from the source unit.
- Graves fracos:
- Increase the gain control.
- Adjust the low pass filter to a higher frequency.
- Try flipping the phase switch (0°/180°).
- Ensure the bass remote control is not set to minimum.
- Subwoofer Not Turning On/Off with Ignition:
- Check the remote turn-on wire connection.
- If using high-level inputs, ensure the "Auto Turn-On" switch is enabled (if applicable).
Especificações
| Nome do modelo | Basslink Mini |
| Tipo de alto-falante | Subwoofer |
| Diâmetro do subwoofer | 6x8 polegadas |
| Potência máxima de saída do alto-falante | 200 Watts |
| Resposta de frequência | 150 Hz (Upper Limit) |
| Tipo de montagem | Under Seat Mount |
| Dimensões do produto (P x L x A) | 10.04" x 14.57" x 4.65" |
| Peso do item | 9.13 libras (4.15 kg) |
| Material | Alumínio |
| Cor | Preto |
| Fonte de energia | Elétrico com fio |
| Método de controle | Remoto |
| Tecnologia de Conectividade | Auxiliar, com fio |
| Modo de saída de áudio | Estéreo |
| Nível de resistência à água | Não resistente à água |
Informações de garantia
The Infinity Basslink Mini comes with a full warranty. Please refer to the warranty card included in your product packaging or visit the official Infinity webConsulte o site para obter os termos e condições detalhados referentes à cobertura da garantia, duração e processo de reclamação.
Apoiar
For technical assistance, troubleshooting, or product inquiries, please contact Infinity customer support. Contact information can typically be found on the product packaging, the official Infinity website, or in the included warranty documentation.
