1. Introdução
The Fender Acoustic Junior GO amplifier is designed to provide full, natural sound for acoustic-electric guitars and vocals. This portable system features two independent channels, each equipped with studio-quality effects. Key functionalities include Bluetooth wireless audio streaming and an integrated 90-second looper, making it suitable for various performance settings. Its rechargeable battery allows for extended use without a power outlet.
2. Configuração
2.1. Desembalagem
Remova cuidadosamente o ampRetire o amplificador da embalagem. Guarde todos os materiais da embalagem para transporte ou armazenamento futuros. Inspecione o amplifier for any signs of damage. If damage is present, contact your retailer immediately.
2.2. Ligando e carregando
The Acoustic Junior GO amplifier is equipped with a rechargeable lithium-ion battery. For initial use, it is recommended to fully charge the battery. Connect the provided power adapter to the amplifier's power input and then to a suitable electrical outlet. The charging indicator will illuminate. A full charge provides approximately 5 hours of playing time at full volume or 12 hours at moderate volume. The amplifier can also be operated while connected to AC power.
2.3. Conectando instrumentos e microfones
O amplifier features two independent channels:
- Canal 1: Designed for acoustic-electric guitars. Connect your instrument using a standard 1/4-inch instrument cable.
- Canal 2: Designed for microphones. Connect your microphone using an XLR cable. This channel also supports 1/4-inch instrument inputs.
Certifique-se de que todas as conexões estejam seguras antes de ligar o ampmais vivo.
3. Instruções de operação
3.1. Controles de Canal
Each channel features independent controls for volume, equalization (bass, middle, treble), and effects. Adjust these controls to achieve your desired sound. Experiment with different settings to find the optimal tone for your instrument or voice.
3.2. Emparelhamento Bluetooth
To stream audio wirelessly from a phone or tablet:
- Ative o Bluetooth no seu dispositivo móvel.
- Press the Bluetooth pairing button on the amplifier. The indicator light will flash.
- Select 'Fender Acoustic Junior GO' from the list of available devices on your mobile device.
- Once paired, the indicator light will remain solid, and you can stream audio through the ampmais vivo.
3.3. Looper Function
The onboard 90-second looper allows for recording and layering audio. The looper controls include:
- Record/Dub: Press once to start recording. Press again to overdub.
- Reproduzir/Parar: Press once to play the loop. Press again to stop.
- Desfazer: Reverts the last overdub.
Refer to the detailed looper section in the full manual for advanced techniques.
3.4. Tilt-Back Kickstand
O amplifier features an integral tilt-back kickstand. This allows you to angle the amplifier upwards, directing the sound more effectively towards the performer or audience, especially in smaller venues or when placed on the floor.
4. Manutenção
4.1. Limpeza
Para limpar o ampPara remover sujeira incrustada, use um pano macio e seco. Para sujeira mais difícil, use um pano levemente umedecido.amp cloth may be used, followed by a dry cloth. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and components.
4.2. Armazenamento
Armazene o amplifier in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
4.3. Cuidados com a bateria
To maximize the life of the lithium-ion battery:
- Evite descarregar completamente a bateria regularmente.
- Não exponha o amplifier ao calor ou frio extremo.
- Se o amplifier will not be used for several months, charge it to approximately 50% every 3-6 months.
5. Solução De Problemas
This section addresses common issues you might encounter with your Fender Acoustic Junior GO ampmais vivo.
| Problema | Possível causa | Solução |
|---|---|---|
| Nenhuma saída de som | Volume controls are low; cables are not connected properly; instrument/microphone issue; ampAmplificador não está ligado. | Check all volume knobs (master, channel, instrument/mic). Ensure cables are securely connected. Verify instrument/microphone functionality. Confirm ampO amplificador está ligado e carregado. |
| Bluetooth não está pareando | Bluetooth not activated on device; amplifier not in pairing mode; device too far. | Ensure Bluetooth is enabled on your device. Press the amplifier's Bluetooth button to enter pairing mode. Move your device closer to the ampmais vivo. |
| O Looper não está gravando/reproduzindo | Incorrect button sequence; looper memory full (unlikely for 90s). | Review the looper operating instructions. Ensure you are pressing the correct buttons for record, dub, play, and stop. |
| Som distorcido | Input signal too high; volume too high; faulty cable. | Reduce the input gain or volume on the instrument/microphone channel. Lower the master volume. Try a different cable. |
6. Especificações
| Recurso | Detalhe |
|---|---|
| Nome do modelo | Acoustic Junior GO |
| Número do modelo | 2314400000 |
| Marca | Pára-choque |
| Potência de saídatage | 100 Watts |
| Dimensões do produto | 16 x 20 x 16 inches (Height x Width x Depth) |
| Peso do item | 20.6 libras |
| Tipo de Bateria | Lítio-Íon Recarregável |
| Duração da bateria | Up to 5 hours (full volume), 12 hours (moderate volume) |
| Conectividade | Bluetooth, 1/4-inch instrument input, XLR microphone input |
| Looper | 90-second with Record/Dub, Play/Stop, Undo |
| Volumetage | Vol universaltage para uso global |
7. Garantia e Suporte
Fender products are designed for reliability and performance. For information regarding warranty coverage, product registration, or technical support, please visit the official Fender webou entre em contato com o serviço de atendimento ao cliente da Fender. Guarde seu comprovante de compra para eventuais solicitações de garantia.
Suporte online: www.fender.com/support
