Paulmann 94453 Capea LED Outdoor Wall Lamp com manual de instruções do detector de movimento

Introdução

Thank you for choosing the Paulmann 94453 Capea LED Outdoor Wall Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image: The Paulmann Capea LED Outdoor Wall Lamp, showing the product itself and its retail packaging. The lamp is black, with a conical shade and an integrated motion sensor at the base.

Instruções importantes de segurança

• Segurança elétrica: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always switch off the main power supply before installation, maintenance, or repair.
• Uso externo: This product is designed for outdoor use (IP44 rated). Ensure all connections are properly sealed to prevent water ingress.
• Montagem: Mount the fixture securely on a stable surface. Do not install on flammable surfaces.
• Fonte de luz: The LED light source is integrated and not replaceable by the user. Do not attempt to open or modify the light source compartment.
• Temperatura: Não cubra o lamp with insulating material. Ensure adequate air circulation around the fixture.

Conteúdo da embalagem

Verifique se todos os componentes estão presentes antes de iniciar a instalação:

• 1x Paulmann Capea LED Outdoor Wall Lamp (Modelo 94453)
• Instruções de montagem
• Mounting hardware (screws, wall plugs) - (Assumed, as typical for wall lamps)

Especificações técnicas

Image: Technical drawing showing the dimensions of the Paulmann Capea LED Outdoor Wall Lamp: 153mm width, 165mm height, and 96mm depth.

Guia de instalação

Antes de começar: Ensure the main power supply to the installation area is switched off at the circuit breaker. Use appropriate tools and safety equipment.

1. Preparar o local de montagem: Choose a suitable wall location for the lamp, ensuring it is a stable surface and allows for proper wiring. Mark the drilling points for the mounting bracket.
2. Furos de perfuração: Faça furos nos pontos marcados e insira as buchas apropriadas (se necessário).
3. Suporte de montagem: Fixe o suporte de montagem na parede utilizando os parafusos fornecidos.
4. Fiação: Connect the electrical wires from your mains supply to the terminal block inside the lamp fixture. Ensure correct polarity (Live, Neutral, Earth) and secure all connections tightly. Refer to local electrical codes.
5. Anexar Lamp: Prenda cuidadosamente o lamp fixture to the mounting bracket, ensuring no wires are pinched. Secure the lamp no lugar.
6. Restaurar energia: Após a conclusão da instalação e a verificação de que todas as conexões estão seguras, restabeleça a energia no disjuntor principal.

Image: The Paulmann Capea LED Outdoor Wall Lamp shown with its packaging, which illustrates basic installation steps and features like the motion sensor and IP44 rating.

Instruções de operação

The Paulmann Capea LED Outdoor Wall Lamp features an integrated motion sensor for automatic operation.

Configurações do sensor de movimento

The motion sensor can be adjusted to suit your specific needs. Typically, there are controls for:

• Ângulo de detecção: Approximately 90 degrees.
• Faixa de detecção: 2-8 metros.
• Light Sensitivity (LUX): Determines the ambient light level at which the sensor activates the lamp.
  • ON < 20 Lux: O lamp will turn on when motion is detected and the ambient light is below 20 Lux (dark conditions).
  • OFF > 20 Lux: O lamp will remain off when the ambient light is above 20 Lux (daylight conditions).
• Tempo ligado: Sets the duration the light remains on after motion is detected. Adjustable from approximately 5 seconds to 5 minutes.

Adjust these settings using the small dials or switches located on the motion sensor unit, usually found at the bottom of the lamp. Use a small screwdriver if necessary.

Image: A diagram illustrating the motion sensor's detection angle (90 degrees), range (2-8 meters), and light sensitivity settings (On < 20 Lux / Off > 20 Lux), along with the adjustable time duration (5 seconds - 5 minutes).

Imagem: Um close-up view of the integrated motion sensor located at the base of the Paulmann Capea LED Outdoor Wall Lamp, showing its spherical lens.

Manutenção

• Limpeza: Desligue a energia antes de limpar. Limpe o...amp com um suave, damp pano. Não utilize produtos de limpeza abrasivos ou solventes, pois estes podem danificar o acabamento ou os componentes elétricos.
• Fonte de luz: The LED light source is integrated and designed for long-term use (30,000 hours). It is not user-replaceable. If the LED fails, the entire fixture typically needs replacement.
• Inspeção: Inspecione periodicamente o lamp Verifique se há sinais de danos, conexões soltas ou desgaste. Resolva quaisquer problemas imediatamente.

Solução de problemas

Garantia e Suporte ao Cliente

Paulmann products are manufactured to high quality standards. This product comes with a 5-year guarantee, as indicated on the packaging. For warranty claims, technical assistance, or further inquiries, please contact your retailer or Paulmann customer support directly. Keep your proof of purchase for warranty purposes.

For more information, visit the official Paulmann website: www.paulmann.com

Informações sobre descarte

This product contains electronic components and an integrated LED light source. Do not dispose of it with general household waste. Please take it to a designated collection point for electrical and electronic equipment recycling in accordance with local regulations. Proper disposal helps prevent potential negative consequences for the environment and human health.