FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk Instruction Manual

1. Introdução

Thank you for choosing the FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read all instructions carefully before use and retain this manual for future reference.

2. Informações de segurança

• Certifique-se de que todas as peças estejam presentes e sem danos antes da montagem.
• Assembly may require two people due to the weight of components.
• Mantenha crianças e animais de estimação afastados da mesa durante o funcionamento.
• Do not overload the desk. The maximum weight recommendation is 154 pounds (70 kg).
• Ensure all electrical connections are secure and follow local electrical safety standards.
• Evite colocar líquidos diretamente sobre o painel de controle ou perto de componentes elétricos.
• Utilize somente o adaptador de energia fornecido.
• Do not disassemble or modify the desk's motor or control system.

3. Conteúdo da embalagem

Your FLEXISPOT EN2 desk will arrive in two separate packages. Please verify all components against the packing list before beginning assembly.

• Desktop (55" x 28" White Top)
• Desk Frame (Gray Frame)
• Colunas de Elevação (Pernas)
• Trave transversal
• Placas de suporte
• Motor
• Control Panel (Keypad)
• Adaptador de energia e cabos
• Clamp Power Strip with 3 AC Outlets and 2 USB Ports
• Bandeja de gerenciamento de cabos
• Assembly Hardware (screws, hex keys, wrench)
• Manual de instruções

4. Instruções de montagem

Please follow these steps carefully. An electric drill (not included) may be required for some steps.

1. Prepare the Desktop: Lay the desktop upside down on a soft, clean surface to prevent scratches. The packaging includes foam pads that can be used for this purpose.
2. Instale o motor: Attach the motor to the right lifting column. Ensure the motor's gear aligns with the column's mechanism and secure it with the provided screws and hex key. Tighten screws gradually and evenly.
3. Attach Lifting Columns to Crossbeam: Connect the lifting columns to the crossbeam. Ensure the orientation is correct as per the manual (e.g., motor side).
4. Install Support Plates: Secure the support plates to the lifting columns using the specified screws.
5. Install Desk Feet: Attach the desk feet to the bottom of the lifting columns. Ensure they are securely fastened.
6. Install Transmission Rod: Insert the transmission rod between the lifting columns, connecting it to the motor. Loosen the nut on the rod if necessary for insertion, then tighten it.
7. Mount the Control Panel (Keypad): Position the control panel on the underside of the desktop, typically on the front right edge for easy access. Secure it with the provided screws.
8. Mount the Cable Management Tray: Assemble the cable management tray by bending it along the perforated lines. Mount it to the underside of the desktop using the provided screws. Ensure the shorter lip faces the back to allow cables to drop in.
9. Conectar a fiação: Connect the motor cable, control panel cable, and power adapter to the main control box. Use the provided cable ties and adhesive clips to organize and secure all cables neatly under the desk and within the cable management tray.
10. Anexar Clamp Filtro de linha: O clamp power strip can be attached to the back or side of your desk. Adjust the clamp to fit your desktop thickness and secure it in your desired location.
11. Verificação final: Ensure all screws are tightened and all cables are securely connected and managed. Carefully flip the desk upright.

5. Instruções de operação

Your FLEXISPOT EN2 desk features an intuitive 6-button digital controller for easy height adjustment and memory presets.

• Up/Down Buttons (Arrows): Press the up arrow to raise the desk and the down arrow to lower it. The current height will be displayed on the LED screen.
• Predefinições de memória (1, 2, 3, 4): Your desk can store up to four preferred height settings. To set a memory position:
  1. Ajuste a mesa à altura desejada usando as setas para cima/para baixo.
  2. Press the 'M' button. The LED display will show 'S-'.
  3. Press the desired number button (1, 2, 3, or 4) within 3 seconds. The height is now saved.
• Recurso anticolisão: The desk is equipped with an anti-collision system. If the desk encounters an obstacle during movement, it will stop and reverse slightly to prevent damage. You can adjust the sensitivity of this feature (refer to the full manual for detailed instructions on adjusting sensitivity levels).

6. Características

• Removable Desktop Power Outlet: Equipped with 3 power outlets and 2 USB charging ports, clip it to the back or side of your desk.
• Ampo Desktop de peça inteira: FSC-Certified wood desktop (55" x 28") provides generous space. Hand-measured: ±1" tolerance.
• 4 Memory Buttons: 6-button digital controller with 4 programmable memory presets.
• Motorized Height Adjustment: Smoothly adjusts from 28.1” to 45.7” with a quiet motor (less than 50 dB).
• Construção durável: Industrial-grade steel frame and solid tabletop support up to 176 pounds.
• Gerenciamento de cabos: Integrated cable management device to keep your workspace tidy.

7. Especificações

8. Manutenção

• Limpeza: Limpe as superfícies da mesa com um pano úmido.amp pano. Evite produtos químicos agressivos que podem danificar o acabamento.
• Verificações regulares: Verifique periodicamente todos os parafusos e porcas para garantir que estejam bem apertados. Reaperte-os, se necessário.
• Inspeção de cabos: Regularly inspect power cords and connections for any signs of wear or damage. Replace immediately if damage is found.

9. Solução De Problemas

Caso encontre algum problema com sua mesa, consulte as seguintes soluções comuns:

• Mesa não se move: Check all cable connections, especially the power adapter and motor cable. Ensure the power outlet is functioning.
• Uneven Movement/Wobble: Ensure all assembly screws are tightened evenly. Check if the desk is placed on a level surface. Adjust the leveling feet if necessary.
• Painel de controle não está respondendo: Try resetting the desk. (Refer to the full manual for specific reset procedures, often involves holding down specific buttons until 'RST' appears).
• Acionamento frequente do sistema anticolisão: The sensitivity of the anti-collision feature might be too high. Refer to the full manual for instructions on adjusting sensitivity levels.

10. Garantia e Suporte

Your FLEXISPOT EN2 desk comes with a comprehensive warranty:

• Garantia de 5 anos: Covers frames, motors, and other mechanical devices.
• Garantia de 2 anos: Covers controllers, switches, and electronics.

For warranty claims, technical support, or any questions not covered in this manual, please contact FLEXISPOT customer service through their official website or the retailer where you purchased the product. Please have your model number (EN2) and proof of purchase ready.