Introdução
This manual provides essential information for the proper setup, operation, and maintenance of your Corally COR54011 TOROX 185A Brushless 2-6SS Speed Controller. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
The Corally TOROX 185A ESC is designed for high-performance RC applications, offering robust power delivery and advanced programmability for various motor and battery configurations.
Produto acimaview
Image: The Corally COR54011 TOROX 185A Brushless Speed Controller, showcasing its red housing, integrated cooling fan, and robust gold-plated motor and battery connectors. The unit features a Team Corally logo on the side.
The TOROX 185A ESC is a powerful electronic speed controller featuring a durable red casing, an integrated cooling fan for thermal management, and multiple connection points for motor and battery. It supports both sensored and sensorless brushless motors (in sensorless mode) and is designed for 1/8th scale RC vehicles.
Precauções de segurança
- Desconecte sempre a bateria do ESC quando não estiver em uso.
- Ensure proper polarity when connecting batteries to avoid damage.
- Utilize em uma área bem ventilada para evitar o superaquecimento.
- Keep away from water unless specifically designed for waterproof operation (this model has water protection).
- Do not attempt to disassemble or modify the ESC.
- Use appropriate motor and battery combinations as specified to prevent overload.
Configuração e instalação
1. Mounting the ESC
Securely mount the ESC in your vehicle using double-sided tape or screws, ensuring good airflow around the unit for effective cooling. Avoid mounting near heat sources or in enclosed spaces.
2. Conexão do motor
Connect the three motor wires from your brushless motor to the corresponding gold-plated terminals (A, B, C) on the ESC. Ensure a secure connection. For sensored motors, connect the sensor wire to the sensor port on the ESC and motor.
3. Conexão da bateria
Connect your battery pack to the XT90 connector on the ESC. This ESC supports 2-6S LiPo or 9-18 Cell NiMH batteries. Always double-check polarity before connecting.
4. Conexão do receptor
Plug the ESC's receiver cable into the throttle channel (usually Channel 2) of your RC receiver. The BEC (Battery Eliminator Circuit) provides power to the receiver and servos.
5. Calibração
Before first use, calibrate the ESC with your radio transmitter. Refer to your transmitter's manual for specific calibration steps. Generally, this involves turning on the transmitter, holding full throttle, turning on the ESC, waiting for beeps, moving to full brake, waiting for beeps, and then returning to neutral.
Instruções de operação
Ligar/desligar
- To power on: Ensure the transmitter is on, then connect the battery to the ESC.
- To power off: Disconnect the battery from the ESC.
Programando o ESC
The TOROX 185A ESC is programmable. An optional Hobbywing LED programming card can be used for easier parameter adjustment. Key programmable parameters include:
- Modo acelerador: Forward/Reverse (with programmable reverse lockout)
- Freio de arrasto: 0-16% adjustment
- Modo de bateria: NiMH/LiPo selection
- LiPo Cut-off Voltage: Programmable to protect LiPo batteries from over-discharge.
- Temperatura de proteção térmica: Ajuste para 105°C ou 125°C.
- Volume BECtage: 6V ou 7.4V.
Refer to the specific programming card manual for detailed instructions on how to change these settings.
Manutenção
- Limpeza: Regularly clean the ESC and cooling fan to remove dirt and debris. Use a soft brush or compressed air.
- Inspeções: Periodically inspect all wires and connectors for signs of wear, damage, or loose connections.
- Armazenar: Guarde o ESC em local seco e fresco, longe da luz solar direta e de temperaturas extremas.
- Proteção da água: While this ESC features water protection, it is not designed for prolonged submersion. Always dry the unit thoroughly after exposure to moisture.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| O ESC não liga. | Bateria desconectada, bateria fracatage, conexão defeituosa. | Check battery connection, charge battery, inspect wires. |
| Motor não responde. | Incorrect calibration, motor wires loose, receiver not connected. | Recalibrate ESC, check motor and receiver connections. |
| O ESC superaquece. | Poor ventilation, motor/gear ratio too high, incorrect timing. | Improve airflow, adjust gear ratio, check motor timing. |
| Operação irregular. | Radio interference, loose connections, damaged sensor wire. | Check radio system, secure all connections, inspect sensor wire. |
Especificações
| Parâmetro | Valor |
|---|---|
| Modelo | COR54011 (C-54011) |
| Corrente Máx. Contínua | 185 UMA |
| Max. Burst Current | 950 UMA |
| Vol de entradatage (LiPo) | 2-6S (11.1-22.2 V) |
| Vol de entradatage (NiMH) | 9-18 Cell |
| Limite do motor (LiPo 4S) | 3000 Kv (5892 size motor) |
| Limite do motor (LiPo 6S) | 2400 Kv (5892 size motor) |
| Volume BECtage | 6V / 7.4V (Programmable) |
| Corrente BEC | 0 25-A |
| Programável | Yes (via optional Hobbywing LED card) |
| Proteção Térmica | 105°C / 125°C (Programmable) |
| Proteção da Água | Sim |
| Ventilador de refrigeração | 30x30x10 milímetros |
| Conector do motor | 6.5 mm female |
| Conector de bateria | Conector XT90 |
| Tamanho do fio da bateria | 10 AWG |
| Uso recomendado | 1/8th scale RC vehicles |
| Peso | Aproximadamente. 250 g (0.55 libras) |
Garantia e Suporte
For warranty information and technical support, please contact Corally customer service or visit their official website. Guarde o comprovante de compra para solicitações de garantia.
Observação: Os termos específicos da garantia podem variar conforme a região e o revendedor.
