1. Introdução
The UNI-T UTD2152CEX is a high-performance digital storage oscilloscope designed for precise waveform analysis and measurement. This device features a 150MHz bandwidth across 2 channels, a 1GSa/s real-time sampling rate, and a wide vertical range from 1mV/div to 20V/div. It is equipped with a 7-inch TFT LCD display, offering clear visualization of waveforms and measurement data. This manual provides essential information for the safe and effective operation of your oscilloscope.
Key features include automatic measurement of 32 waveform parameters, a unique waveform record and replay function, and support for plug-and-play USB storage for data transfer and system software upgrades. Its versatile design makes it suitable for various applications, including serial data analysis, jitter analysis, data storage device testing, and general electronics design, maintenance, and troubleshooting.
2. Informações de segurança
Please read all safety instructions carefully before operating the UNI-T UTD2152CEX oscilloscope. Failure to follow these instructions may result in electric shock, fire, or damage to the device.
- Fonte de energia: Ensure the oscilloscope is connected to a power source that matches the specified voltage and frequency requirements. Use only the provided power cord.
- Aterramento: The oscilloscope must be properly grounded to prevent electric shock. Do not defeat the grounding feature of the power plug.
- Ambiente: Operate the device in a dry, well-ventilated area. Avoid exposure to moisture, extreme temperatures, or direct sunlight.
- Sondas: Use only probes designed for the oscilloscope and ensure they are correctly connected before making measurements. Verify the probe's voltage rating matches or exceeds the circuit being tested.
- Manutenção: Refer to the maintenance section for cleaning and care instructions. Do not attempt to service the device yourself; contact qualified personnel for repairs.
- Ventilação: Do not block the ventilation openings on the device. Adequate airflow is essential to prevent overheating.
3. Conteúdo da embalagem
Verify that all items listed below are included in your UNI-T UTD2152CEX oscilloscope kit:
Figura 3.1: Included accessories for the UTD2152CEX oscilloscope.
- UNI-T UTD2152CEX Digital Storage Oscilloscope Unit
- Probes (1 pair)
- Sprung Hooks (2 pieces)
- IC Tips (2 pieces)
- Elastical Contact Ground (1 piece)
- Adjustment Tool (1 piece)
- Marker Rings (4 pieces)
- Cabo USB (1 peça)
- USA Standard Power Cord (1 piece)
- Manual do usuário (este documento)
4. Produto acabadoview
The UNI-T UTD2152CEX features a user-friendly interface with a large display and intuitive controls. Familiarize yourself with the main components:
4.1 Painel Frontal
Figura 4.1: Frente view of the UTD2152CEX oscilloscope, showing the display, control knobs, and input channels.
The front panel includes the 7-inch TFT LCD display, various function buttons (e.g., MEASURE, ACQUIRE, STORAGE, CURSOR, DISPLAY, UTILITY, AUTO), vertical and horizontal controls, trigger controls, and input channels (CH1, CH2). A USB host port is located on the front for convenient data transfer.
4.2 Painel traseiro
Figura 4.2: Traseira view of the UTD2152CEX oscilloscope, highlighting the USB Device port and Pass/Fail output.
The rear panel houses the power input, a USB Device port for PC communication, and a Pass/Fail output connector. Ensure proper ventilation around these areas during operation.
4.3 Dimensões
Figura 4.3: Physical dimensions of the UTD2152CEX oscilloscope.
The approximate dimensions of the oscilloscope are 12.2 inches (31.1 cm) in width, 5.9 inches (15.2 cm) in height, and 4.8 inches (12.4 cm) in depth.
5. Configuração
Follow these steps for initial setup of your UNI-T UTD2152CEX oscilloscope:
- Desembalagem: Carefully remove the oscilloscope and all accessories from the packaging. Retain the original packaging for future storage or transport.
- Conexão de energia: Connect the provided USA standard power cord to the power input on the rear panel of the oscilloscope, then plug it into a grounded AC power outlet.
- Ligar: Press the power button located on the front panel to turn on the device. The UNI-T logo will appear on the screen during startup.
- Conexão da sonda: Connect the oscilloscope probes to the CH1 and/or CH2 input connectors on the front panel. Ensure a secure connection.
- Compensação da sonda: Before taking measurements, it is recommended to perform probe compensation to ensure accurate readings. Refer to the operating instructions for detailed steps on probe compensation.
6. Instruções de operação
This section outlines the basic operation of the UNI-T UTD2152CEX oscilloscope.
6.1 Basic Waveform Display
After powering on, connect a probe to an input channel (e.g., CH1) and attach the probe tip to the signal source you wish to observe. Use the AUTO button for quick automatic setup of vertical, horizontal, and trigger settings. Adjust the VERTICAL (Volts/Div) e HORIZONTAL (Sec/Div) knobs to scale the waveform appropriately on the 7-inch display.
Figura 6.1: The 7-inch TFT LCD display with 800x480 resolution provides a clear view de formas de onda.
6.2 Waveform Parameters and Measurements
The UTD2152CEX supports automatic measurement of 32 waveform parameters. Press the MEDIR button to access the measurement menu. You can select various parameters such as Peak-to-Peak Voltage (Vpp), Frequency, Period, Rise Time, Fall Time, and more. The results are displayed on the screen for easy analysis.
Figura 6.2: Sobreview of key specifications including 150MHz bandwidth, 1GSa/s sample rate, and 34 waveform parameters.
6.3 Trigger System
The trigger system stabilizes repetitive waveforms and captures single-shot events. Use the ACIONAR controls to set the trigger level, mode (Edge, Pulse, Video, Slope, Alternate), and source (CH1, CH2, EXT, AC Line). Proper trigger settings are crucial for observing specific events within a waveform.
6.4 Data Storage and Connectivity
The oscilloscope supports plug-and-play USB storage devices. Insert a USB flash drive into the front panel USB host port to save waveform data, screenshots, or instrument settings. The unique waveform record and replay function allows for capturing and reviewing transient events. The rear USB Device port enables communication with a computer for remote control and data transfer using compatible software. System software upgrades can also be performed via USB.
6.5 Multilingual Menu
The device features a multilingual menu, allowing users to select their preferred language for operation. Access this setting through the UTILIDADE menu.
7. Manutenção
Proper maintenance ensures the longevity and accuracy of your UNI-T UTD2152CEX oscilloscope.
- Limpeza: Desconecte o cabo de alimentação antes de limpar. Use um pano macio e seco.amp cloth with mild detergent to clean the exterior. Do not use abrasive cleaners or solvents. Keep the display clean and free of dust.
- Armazenar: When not in use, store the oscilloscope in a dry, dust-free environment. Use the original packaging or a suitable carrying case to protect it from physical damage.
- Calibração: Recomenda-se a calibração regular por pessoal de serviço qualificado para manter a precisão das medições.
- Cuidados com a sonda: Handle probes carefully. Avoid bending or stressing the cables. Store them properly to prevent damage to the tips and connectors.
8. Solução De Problemas
This section provides solutions to common issues you might encounter with your oscilloscope.
| Problema | Possível causa | Solução |
|---|---|---|
| Sem exibição após ligar | Power cord not connected; Power switch off; Faulty power outlet | Check power cord connection; Ensure power switch is ON; Test power outlet with another device. |
| Nenhuma forma de onda exibida | Probe not connected; Input signal too small/large; Incorrect vertical/horizontal settings; Incorrect trigger settings | Connect probe securely; Adjust Volts/Div and Sec/Div; Use AUTO button; Adjust trigger level and mode. |
| forma de onda instável | Incorrect trigger settings; Noisy signal source | Adjust trigger level and mode; Ensure proper grounding of the signal source and oscilloscope. |
| USB storage not recognized | Incompatible USB device; USB device faulty; Incorrect file formato do sistema | Ensure USB device is FAT32 formatted; Try a different USB device; Check USB port for damage. |
If the problem persists after attempting these solutions, please contact UNI-T customer support or a qualified service technician.
9. Especificações
Detailed technical specifications for the UNI-T UTD2152CEX Digital Storage Oscilloscope:
- Modelo: UTD2152CEX
- Canais: 2
- Largura de banda: 150 MHz
- SampTaxa de ling: 1 GSa/s (Real-time)
- Faixa vertical: 1 mV/div a 20 V/div
- Parâmetros da forma de onda: Automatic measurement of 32 parameters
- Waveform Capture Rate: 5,000 wfms/s
- Profundidade de armazenamento: 64 mil pontos
- Mostrar: 7-inch TFT LCD, WVGA (800x480 resolution)
- Conectividade: USB Host (front), USB Device (rear)
- Características especiais: Unique waveform record and replay function, supports USB drive system software upgrade, multilingual menu.
- Dimensões (C x L x A): Aproximadamente 12.2 x 4.8 x 5.9 polegadas (31.1 x 12.4 x 15.2 cm)
- Peso: Aproximadamente 6.24 libras (2.83 kg)
10. Garantia e Suporte
Os produtos UNI-T são fabricados segundo elevados padrões de qualidade e contam com garantia do fabricante. Para obter informações específicas sobre os termos e condições da garantia, consulte o cartão de garantia que acompanha o produto ou visite o site oficial da UNI-T. website.
For technical support, troubleshooting assistance, or service inquiries, please contact UNI-T customer service through their official channels. Keep your purchase receipt and product serial number handy when contacting support.