1. Introdução
This manual provides instructions for the safe and efficient operation of your Lepro PR210002-US LED Table Lamp. Este versátil lamp offers a range of lighting options, including tunable white light, RGB color changing, dimming capabilities, and an auto-off timer. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: Lepro PR210002-US LED Table Lamp.
2. Conteúdo da embalagem
Before proceeding with setup, please ensure all components are present:
- 1 x Lepro PR210002-US LED Table Lamp
- 1 x US Power Adapter
- 1 x Cabo USB Tipo C
- 1 x Manual do Usuário (este documento)
3. Configuração
Follow these steps to set up your LED Table Lamp:
- Descompacte: Remova cuidadosamente todos os componentes da embalagem.
- Conecte a energia: Insert the Type C USB cable into the lamp's charging port. Connect the other end of the USB cable to the provided US power adapter, then plug the adapter into a standard wall outlet.
Figure 2: Connecting the lamp to power. The lamp measures 3.9 inches in diameter and 7.1 inches in height, with a 4.9 ft cable.
4. Instruções de operação
The Lepro LED Table Lamp features intuitive touch controls located on the top surface and the base.
Figure 3: Touch Control Overview.
4.1. Ligar/desligar
- Pressão curta: Lightly tap the top touch area (power symbol) to turn the lamp ligado ou desligado.
4.2. Adjusting White Light (Tunable White Mode)
O lamp offers three white light temperatures: 2700K (Warm White), 4000K (Neutral White), and 5700K (Cool White).
- Alterar temperatura: Press the 'M' button on the lamp's base to cycle through the white light temperatures (2700K → 4000K → 5700K).
- Ajustar brilho: While in any white light mode, Pressão longa the top touch area to continuously adjust the brightness from 5% to 100%. Release when desired brightness is reached.
Figure 4: Tunable White Light Options (2700K, 4000K, 5700K).
4.3. RGB Color Changing Modes
O lamp features 7 static RGB colors and an auto-color changing mode.
- Access RGB Modes: Press the 'M' button repeatedly until the lamp enters RGB mode.
- Select Static Color: While in RGB mode, Pressão longa the top touch area to cycle through the 7 available colors. Release when your desired color is displayed.
- Auto Color Changing: Continue pressing the 'M' button after the static RGB colors to activate the auto-color changing mode.
- Adjust Speed (Auto Mode): While in auto-color changing mode, Pressão longa the top touch area to adjust the speed of the color transitions (3-level speed).
Figure 5: RGB Color Changing Mood Light.
4.4. Auto-Off Timer
O lamp includes a convenient auto-off timer function for 30 or 60 minutes.
- Ativar temporizador: Press the timer button (clock symbol) on the lampé base.
- Temporizador de 30 minutos: One press activates the 30-minute timer (indicated by one green LED on the base).
- Temporizador de 60 minutos: A second press activates the 60-minute timer (indicated by two green LEDs on the base).
- Deactivate Timer: A third press will turn off the timer function (no green LEDs).
Figure 6: Auto-Off Timer Function.
4.5. Função de memória
O lamp retains the last used brightness and color setting when turned off and on again, ensuring a consistent experience.
5. Manutenção
Para garantir a longevidade e o desempenho ideal do seu lamp, siga estas diretrizes de manutenção:
- Limpeza: Desconecte o lamp Desligue a energia antes de limpar. Use um pano macio e seco para limpar.ampNão utilize produtos de limpeza abrasivos, solventes ou produtos químicos agressivos, pois estes podem danificar o acabamento.
- Manuseio: Lidar com o lamp Manuseie com cuidado. Evite deixá-lo cair ou submetê-lo a impactos fortes.
- Armazenar: Se armazenar o lamp for an extended period, ensure it is clean and dry. Store it in a cool, dry place away from direct sunlight.
6. Solução De Problemas
If you encounter issues with your Lepro LED Table LampConsulte os seguintes problemas comuns e suas soluções:
| Problema | Possível causa | Solução |
|---|---|---|
| Lamp não liga. | Sem conexão de energia. | Ensure the power adapter is securely plugged into a working outlet and the USB-C cable is firmly connected to the lamp. |
| Brightness adjustment is not smooth or lamp turns off when dimming. | Incorrect operation of touch control. | Ensure you are performing a Pressão longa on the top touch area to adjust brightness. A short press will turn the lamp off. Release your finger when the desired brightness is achieved. |
| Colors are not changing or cycling. | Not in RGB mode or incorrect operation. | Press the 'M' button to cycle through modes until RGB mode is active. For static colors, Pressão longa the top touch area. For auto-changing, ensure auto-color changing mode is selected via the 'M' button, then Pressão longa the top touch area to adjust speed. |
| A função de temporizador não está funcionando. | O temporizador não está ativado ou está configurado incorretamente. | Press the timer button on the base. One green LED indicates 30-minute timer, two green LEDs indicate 60-minute timer. Ensure the correct timer setting is active. |
7. Especificações
| Recurso | Detalhe |
|---|---|
| Número do modelo | PR210002-EUA |
| Marca | Lepro |
| Dimensões do produto | 3.9"P x 3.9"L x 7.1"A |
| Peso do item | 0.85 libras (13.6 onças) |
| Material | Plástico |
| Tipo de fonte de luz | LIDERADO |
| Brilho | 350 Lúmens |
| O quetage | 7 watts |
| Volumetage | 120 Volts (CA) |
| Opções de cores claras | 7 Colors + 3 White Light Temperatures (2700K-4000K-5700K) |
| Método de controle | Tocar |
| Fonte de energia | Elétrico com fio |
| Comprimento do cabo | 4 pés |
| Uso interno/externo | Somente para uso interno |
| Nível de resistência à água | Não resistente à água |
8. Garantia e Suporte
For warranty information or technical support, please contact Lepro customer service through their official website or the retailer where the product was purchased. Please have your model number (PR210002-US) and purchase details ready when contacting support.
