1. Introdução
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector (Model: IR_OUT_BA). Please read this manual thoroughly before installation and use to ensure safe and correct operation. Keep this manual for future reference.
Imagem 1.1: Frente view of the SEBSON Outdoor Motion Detector.
2. Instruções de segurança
Observe sempre as seguintes precauções de segurança para evitar ferimentos ou danos ao dispositivo:
- Segurança elétrica: Installation and maintenance should only be performed by a qualified electrician. Always disconnect the main power supply before any installation, wiring, or maintenance work.
- Volumetage: Certifique-se de que o volume operacionaltage of 230V AC matches your electrical supply.
- Classificação IP44: This device is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is suitable for outdoor use but must not be submerged in water.
- Montagem: Mount the device securely on a stable surface. Do not install near flammable materials or heat sources.
- Crianças: Mantenha os materiais de embalagem e as peças pequenas longe do alcance de crianças.
3. Conteúdo da embalagem
O pacote inclui:
- 1x SEBSON Outdoor Motion Detector (Model: IR_OUT_BA)
4. Produto acabadoview e Características
The SEBSON Outdoor Motion Detector is designed for reliable motion detection in outdoor environments. Key features include:
- Faixa de detecção: Up to 12 meters with a 180° infrared sensor.
- Adjustable Sensor Head: Can be swiveled vertically by 300° for precise area coverage.
- Adjustable Illumination Duration (TIME): From 10 seconds to 7 minutes.
- Adjustable Ambient Brightness (LUX): Operates between 3 and 2000 lux, allowing for day and night operation settings.
- Compatível com LED: Suporta LED lamps and other energy-saving bulbs up to 300W, and incandescent bulbs up to 1200W.
- Design durável: IP44 rated for outdoor use, anthracite color, made of plastic.
Imagem 4.1: Terminadoview of key product features: 12m/180° detection, up to 300W LED, IP44 rating, 10 sec - 7 min duration, 3-2000 LUX sensitivity, 230V operation.
Image 4.2: Dimensions of the motion detector (96mm x 86mm x 60mm) and its 300° vertical swiveling capability.
5. Configuração e instalação
Siga estas etapas para uma instalação correta:
- Prepare-se para a Instalação: Antes de começar, certifique-se de que a alimentação principal de energia da área de instalação esteja desligada no disjuntor.
- Escolha o local de montagem: Select a suitable outdoor wall for surface mounting. Consider the desired detection area and avoid locations directly exposed to strong sunlight, heat sources (e.g., vents), or rapidly changing temperatures, which can cause false triggers. The recommended mounting height is 1.8m - 2.5m.
- Montagem da Base:
- Carefully open the motion detector housing.
- Use the base of the detector as a template to mark the drilling points on the wall.
- Drill holes at the marked points. Insert appropriate wall plugs if necessary.
- Secure the detector's base firmly to the wall using screws.
- Conexões de fiação: Connect the electrical wires to the terminal block inside the detector. This device requires a 3-wire connection.
- Connect the Live wire (L) from the power supply.
- Connect the Neutral wire (N) from the power supply.
- Connect the Switched Live wire (L') to your light fixture.
Imagem 5.1: Example wiring diagram. Ensure correct Live (L), Neutral (N), and Switched Live (L') connections.
- Moradias próximas: Carefully close the detector housing, ensuring no wires are pinched.
- Restaurar energia: Once installation is complete and all connections are secure, restore the main power supply.
Image 5.2: The motion detector installed on an exterior wall, demonstrating typical placement.
6. Instruções de operação e ajustes
The motion detector features two adjustable dials for customizing its operation:
Imagem 6.1: Close-up view of the 'TIME' and 'LUX' adjustment dials on the motion detector.
6.1. TIME Adjustment (Illumination Duration)
The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. The duration can be set from approximately 10 seconds to 7 minutes.
- Turn the dial clockwise (+) for a longer illumination duration.
- Turn the dial counter-clockwise (-) for a shorter illumination duration.
6.2. LUX Adjustment (Ambient Brightness Sensitivity)
The 'LUX' dial determines the ambient light level at which the motion detector will activate. It can be set from 3 lux (dark) to 2000 lux (daylight).
- Turn the dial towards the ícone do sol for activation in brighter conditions (e.g., during the day).
- Turn the dial towards the ícone da lua for activation only in darker conditions (e.g., at night).
6.3. Adjusting the Sensor Head
The sensor head can be manually swiveled vertically by 300° to fine-tune the detection area. Adjust it to cover the desired zone and avoid areas where unwanted triggers might occur (e.g., public pathways, moving foliage).
Image 6.2: Diagram illustrating the 180° detection range up to 12 meters and the function of TIME and LUX adjustment dials.
7. Manutenção
To ensure optimal performance and longevity of your motion detector:
- Limpeza: Regularly clean the sensor lens and the outer casing with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or the sensor.
- Inspeção: Periodically check the mounting screws for tightness and ensure the housing remains securely closed. Inspect the wiring for any signs of wear or damage.
- Fatores ambientais: Keep the detection area clear of obstructions like growing plants or debris that could interfere with the sensor's operation.
8. Solução De Problemas
If you encounter issues with your motion detector, refer to the following common problems and solutions:
| Problema | Possível causa | Solução |
|---|---|---|
| A luz não acende quando é detectado movimento. |
|
|
| Light stays on continuously or turns on randomly. |
|
|
| Detection range is poor or inconsistent. |
|
|
If the problem persists after attempting these solutions, please contact SEBSON customer support.
9. Especificações
| Recurso | Especificação |
|---|---|
| Fabricante | SEBSON |
| Número do modelo | IR_OUT_BA |
| Dimensões do produto (C x L x A) | 8.6 x 6 x 9.6 cm |
| Peso | 155 gramas |
| Cor | Antracite |
| Material | Plástico |
| Fonte de energia | AC |
| Volumetage | 230 Volts |
| Max. Power (LED) | 300 Watts |
| Max. Power (Incandescent) | 1200 Watts |
| Método de instalação | Wall Mount (Surface-Mounted) |
| Compatibilidade do tipo de lâmpada | LIDERADO |
| Faixa de detecção | 12m / 180° |
| Swiveling Angle | 300° (vertical) |
| Illumination Duration (TIME) | 10 segundos - 7 minutos |
| Ambient Brightness (LUX) | 3 - 2000 lux |
| Classificação IP | IP44 |
| Usos recomendados | Ar livre |
| Temperatura nominal máxima | 40 graus Celsius |
| País de origem | China |
10. Garantia e Suporte
Política de devolução: Este produto pode ser devolvido no prazo de 30 dias após a compra, de acordo com a política de devolução do vendedor.
Suporte ao cliente: For technical assistance, troubleshooting, or any questions regarding your SEBSON motion detector, please contact SEBSON customer service directly through your purchase platform. Our team is dedicated to providing support and ensuring product quality.
