1. Produto acabadoview
The Einhell Power X-Change 5.2 Ah Battery Twinpack consists of two 18V 5.2 Ah Power X-Change PLUS batteries. These batteries are integral components of the versatile and fully interchangeable Einhell Power X-Change rechargeable battery system. Designed for universal use across all PXC devices, they offer significant cost savings and environmental benefits by allowing a single battery and charger to power multiple tools.
The 18V 5.2 Ah PXC PLUS battery is a high-end model within the Power X-Change family, suitable for TWIN-PACK applications requiring 36V. Its robust housing is engineered to resist dust, corrosion, and mechanical impacts. A protective rubber coating enhances impact resistance and provides a secure grip. A convenient trough handle facilitates easy removal from any tool.
Figure 1: Einhell Power X-Change 5.2 Ah Battery Twinpack. Each battery features a charge indicator with four green LEDs and a robust, ergonomic design.
2. Instruções de segurança
Always observe the following safety precautions when handling and using your Einhell Power X-Change batteries:
- Do not expose batteries to heat, direct sunlight, or fire.
- Não provoque curto-circuito nos terminais da bateria.
- Não mergulhe as baterias em água ou outros líquidos.
- Guarde as baterias em local fresco e seco, longe de materiais inflamáveis.
- Only use original Einhell chargers for charging.
- Do not attempt to open, modify, or repair the battery pack.
- Mantenha as pilhas fora do alcance das crianças.
- In case of battery leakage, avoid contact with skin and eyes. Rinse affected areas with water and seek medical attention.
- Dispose of depleted batteries responsibly according to local regulations.
3. Configuração e uso inicial
3.1 Desembalagem
Carefully remove the batteries from their packaging. Inspect them for any signs of damage. If any damage is observed, do not use the batteries and contact customer support.
3.2 Carregando as Baterias
Before first use, fully charge both batteries. Use only an Einhell Power X-Change charger (sold separately). The charging process is as follows:
- Conecte o carregador a uma tomada elétrica adequada.
- Deslize a bateria no carregador até ouvir um clique.
- A luz indicadora do carregador mostrará o status do carregamento. Consulte o manual do seu carregador para obter informações específicas sobre os padrões de luz.
- Once fully charged, the indicator light will change (e.g., solid green). Remove the battery from the charger.
The batteries feature a proactive battery management system and adapted charging cycles to optimize lifespan and performance.
4. Operating the Batteries
4.1 Inserindo a bateria em uma ferramenta
Certifique-se de que a ferramenta esteja desligada antes de inserir ou remover a bateria.
- Align the battery with the battery slot on your Einhell Power X-Change tool.
- Deslize a bateria firmemente no compartimento até ouvir um clique, indicando que está encaixada com segurança.
- To remove, press the release button(s) on the battery (or tool, depending on design) and slide the battery out.
4.2 Indicador de carga da bateria
Each battery is equipped with an LED charge indicator. Press the button next to the LEDs to check the current charge level:
- 4 LEDs acesos: 75-100% de carga
- 3 LEDs acesos: 50-75% de carga
- 2 LEDs acesos: 25-50% de carga
- 1 LED aceso: Carga de 0 a 25% (recarregue em breve)
5. Manutenção e armazenamento
5.1 Limpeza
Wipe the battery surface with a clean, dry cloth. Do not use abrasive cleaners or solvents. Ensure the battery terminals are clean and free of debris.
5.2 Armazenamento
For optimal battery life, store batteries in a cool, dry place (ideally between 5°C and 20°C / 41°F and 68°F) and away from direct sunlight or extreme temperatures. If storing for extended periods, charge the batteries to approximately 50-75% capacity. Avoid storing fully discharged batteries.
6. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A bateria não carrega. | Charger not plugged in; faulty charger; battery too hot/cold; faulty battery. | Check power connection; try another charger; allow battery to reach room temperature; contact customer support if battery is faulty. |
| A ferramenta não funciona com a bateria. | Battery not fully inserted; battery discharged; faulty tool; faulty battery. | Ensure battery is clicked into place; charge battery; test with another battery/tool; contact customer support. |
| Battery charge indicator not working. | Button malfunction; internal fault. | Ensure button is pressed firmly; if issue persists, contact customer support. |
7. Especificações
- Número do modelo: 4511526
- Tipo de Bateria: Íon de lítio (Li-Ion)
- Volumetage: 18 V
- Capacidade: 5.2 Ah (Ampere-horas)
- Dimensões do produto: 4.84 x 3.03 x 2.87 polegadas (12.3 x 7.7 x 7.3 cm)
- Peso do item: 1.96 pounds (0.89 kg) per battery
- Número de baterias: 2 (included in twinpack)
- Uso recomendado: Power Tools within the Einhell Power X-Change system
8. Garantia e Suporte
Einhell products are manufactured with high-quality materials and undergo strict quality control. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Einhell website. For technical support, spare parts, or service inquiries, please contact Einhell customer service through their official channels.
Official Einhell Website: www.einhell.com
