Introdução
The SHARP Digital Alarm Clock with AccuSet is designed for effortless timekeeping. Featuring automatic time setting, a clear LED display, and user-friendly controls, this clock is ideal for any bedroom. Its AccuSet technology ensures the time is always accurate, eliminating the need for manual adjustments, making it perfect for seniors, children, or anyone seeking a hassle-free alarm clock solution.
Figura 1: Frente view of the SHARP Digital Alarm Clock with green LED display.
Principais características
- AccuSet Automatic Time Set: The clock is pre-programmed to automatically set the correct time, removing the need for manual adjustments. Simply select your time zone.
- Quick Daylight Savings Time (DST) Adjustment: A convenient switch allows for easy adjustment for Daylight Savings Time (+1 hour) or Standard Time (-1 hour).
- High/Low Dimmer Control: Adjust the brightness of the LED display to your preference, ensuring comfortable viewdia ou noite.
- Bateria de reserva: A pre-installed CR2032 button cell battery provides backup for time settings during power outages, ensuring continuous accuracy.
- Seleção de fuso horário: Easily select your local time zone from the options provided at the bottom of the clock.
Figure 2: Diagram illustrating the key features and functionalities of the alarm clock.
Guia de configuração
- Desembalagem: Carefully remove the alarm clock from its packaging.
- Battery Installation (Pre-installed): The CR2032 button cell battery for backup is pre-installed in a screw-secured cabinet at the bottom of the clock. This battery is designed to last for several years. No immediate action is required for initial setup.
- Seleção de fuso horário: Before plugging in the clock, locate the time zone selection switch at the bottom of the unit. Select your correct time zone (e.g., EST, CST, MST, PST). The default time zone is Eastern Standard Time.
- Conexão de energia: Plug the clock into an approved electrical source. The AccuSet feature will automatically program the correct time based on your selected time zone.
- Daylight Savings Time (DST) Adjustment: If applicable, slide the DST switch at the bottom of the clock to "ON" to add one hour (+1 hr) for Daylight Savings Time. For Standard Time, slide the switch to "OFF" to subtract one hour (-1 hr).
Figure 3: Top panel controls for setting time, alarm, and adjusting display.
Instruções de operação
Configurando o alarme
- Pressione o ALARME button once. The alarm time will appear on the display.
- Enquanto a hora do alarme é exibida, pressione o botão HORA botão para ajustar a hora do alarme.
- Pressione o MINUTO botão para ajustar os minutos do alarme.
- Para ativar ou desativar o alarme, pressione o ALARME LIGADO / DESLIGADO button. An alarm indicator light (usually a small LED) will illuminate when the alarm is active.
- To return to the current time display, press the TEMPO button or wait a few seconds for it to revert automatically.
Usando a função soneca
Quando o alarme tocar, pressione o botão grande. SONECA button located on the top of the clock. This will temporarily silence the alarm for a set period (typically 9 minutes), allowing for extra rest. The alarm will sound again after the snooze period ends.
Adjusting Display Brightness (Dimmer Control)
The clock features a High/Low dimmer control to adjust the display brightness. Locate the DIMMER HI/LO button on the top panel. Press this button to toggle between high and low brightness settings to suit your environment and preference.
Figure 4: Illustration of the High & Low Display Dimmer Control.
Manutenção
- Limpeza: To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Substituição da bateria: The CR2032 backup battery is designed for long-term use. If the clock loses time during a power outage after several years, it may be time to replace the battery. This is located in a screw-secured compartment at the bottom of the clock.
- Colocação: Place the clock on a stable, flat surface. Avoid placing it in direct sunlight, near heat sources, or in areas with high humidity.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Clock does not display time after plugging in. | Not connected to power, or power outlet is not active. | Certifique-se de que o cabo de alimentação esteja firmemente conectado a uma tomada elétrica em funcionamento. |
| O horário está incorreto. | Incorrect time zone selected, or DST switch is set incorrectly. | Verify the time zone switch at the bottom of the clock is set to your local zone. Check the DST switch position. |
| O alarme não dispara. | Alarm is not activated, or alarm volume is too low (if adjustable). | Ensure the alarm is turned ON using the ALARM ON/OFF button. Check for an alarm indicator light. |
| A tela está muito brilhante ou muito escura. | É necessário ajustar a intensidade da luz do dimmer. | Press the DIMMER HI/LO button to cycle through brightness settings. |
| O relógio atrasa durante a queda de energia.tage. | Backup battery is depleted. | Replace the CR2032 backup battery located in the compartment at the bottom of the clock. |
Especificações
| Recurso | Detalhe |
|---|---|
| Marca | Afiado |
| Número do modelo | OZJONG |
| Cor | Black - Green Led |
| Tipo de exibição | Digital |
| Características especiais | Alarm, Daylight Saving, Auto Dimmable |
| Dimensões do produto | 5.5"L x 2.6"A |
| Fonte de energia | Elétrico com fio, alimentado por bateria |
| Bateria de reserva | CR2032 (pre-installed) |
| Material | Plástico |
| Peso do item | 9.9 onças |
| Tipo de montagem | Mesa |
| UPC | 049353006079 |
Figura 5: Dimensões do produto para fácil referência.
Garantia e Suporte
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Sharp website. Guarde o recibo de compra para reclamações de garantia.
