Mahli Robotic 3-in-1 Vacuum Cleaner

Introdução

Thank you for choosing the Mahli Robotic 3-in-1 Vacuum Cleaner. This intelligent omni-directional robotic vacuum is designed to simplify your home cleaning routine, effectively cleaning hardwood and tile floors. Please read this manual thoroughly before operating the device to ensure safe and optimal performance.

Instruções importantes de segurança

Ao usar um aparelho elétrico, precauções básicas devem sempre ser seguidas, incluindo as seguintes:

• Leia todas as instruções antes de usar este aparelho.
• Do not operate the vacuum cleaner in areas with flammable or combustible liquids, gases, or explosive dust.
• Mantenha cabelos, roupas largas, dedos e todas as partes do corpo longe de aberturas e peças móveis.
• Não pegue nada que esteja queimando ou soltando fumaça, como cigarros, fósforos ou cinzas quentes.
• Não utilize sem o recipiente de pó e/ou filtros instalados.
• Utilize apenas conforme descrito neste manual. Utilize somente os acessórios recomendados pelo fabricante.
• Não permita que seja usado como brinquedo. É necessária muita atenção quando usado por ou perto de crianças.
• Desligue da tomada quando não estiver em uso e antes de fazer manutenção.
• Se o aparelho não estiver funcionando como deveria, tiver sido derrubado, danificado, deixado ao ar livre ou caído na água, devolva-o a um centro de serviço.

Conteúdo da embalagem

Ao abrir a embalagem, verifique se todos os itens estão presentes:

• Mahli Robotic 3-in-1 Vacuum Cleaner (MBOT3002BK)
• Cabo de carregamento
• Side Brushes (pre-installed or separate)
• Manual do usuário (este documento)

Image: The Mahli Robotic 3-in-1 Vacuum Cleaner, showcasing its sleek, circular design and top panel.

Componentes do produto

Familiarize yourself with the different parts of your robotic vacuum:

Imagem: Topo view of the Mahli Robotic Vacuum, highlighting the power button and the access panel for the dustbin.

• 1. Botão liga / desliga: Pressione para iniciar/parar a limpeza.
• 2. Dustbin Cover: Lift to access the dustbin.
• 3. Luz indicadora: Shows charging status and operational mode.

Imagem: Parte inferior view of the Mahli Robotic Vacuum, showing the two side brushes, driving wheels, and the removable filter compartment.

• 4. Side Brushes: Sweep debris into the vacuum's path.
• 5. Driving Wheels: Allow the vacuum to move across surfaces.
• 6. Charging Contacts: For connecting to the charging cable.
• 7. Dustbin Release: Button or latch to remove the dustbin.
• 8. Filtro: Captures fine dust and particles.

Configurar

1. Descompacte: Carefully remove the vacuum cleaner and all accessories from the packaging.
2. Carga da bateria: Before first use, fully charge the vacuum cleaner. Connect the charging cable to the vacuum's charging port and plug the adapter into a wall outlet. The indicator light will show charging status (e.g., red for charging, blue for fully charged). A full charge takes approximately 2 hours.
3. Instalar escovas laterais: If not pre-installed, gently push the side brushes onto their respective posts on the bottom of the vacuum until they click into place.
4. Preparar a área de limpeza: Remove any large obstacles, loose cables, or small items from the floor that could entangle the vacuum or obstruct its path.

Instruções de operação

1. Iniciando um ciclo de limpeza:

   Ensure the vacuum is fully charged and placed on the floor in the area you wish to clean. Press the power button on the top of the vacuum. The indicator light will turn blue, and the vacuum will begin its cleaning cycle.
2. Stopping a Cleaning Cycle:

   To pause or stop the vacuum during operation, press the power button again. The vacuum will stop, and the indicator light may change color or turn off.

3. Limpeza automática:

   The Mahli Robotic Vacuum uses intelligent omni-directional technology to navigate and clean your floors. It will automatically adjust its path to cover the cleaning area and avoid obstacles. It is designed for hard floors such as hardwood and tile.

Manutenção

Regular maintenance is crucial for optimal performance and longevity of your robotic vacuum. Always turn off the vacuum and unplug it before performing any maintenance.

1. Esvaziar a lata de lixo:

   It is recommended to empty the dustbin after each cleaning cycle or when the dustbin full indicator (if available) illuminates. Lift the dustbin cover, remove the dustbin, and empty its contents into a trash can. Rinse the dustbin with water if necessary, but ensure it is completely dry before reinserting.

2. Limpeza do filtro:

   The filter should be cleaned regularly, ideally after every 1-3 uses depending on usage. Tap the filter gently to remove dust. For a deeper clean, the filter can be rinsed under running water. Allow the filter to air dry completely for at least 24 hours before reinserting it into the dustbin.
3. Limpeza das escovas laterais:

   Check the side brushes periodically for tangled hair or debris. Gently pull them off their posts to clean. If brushes are worn or damaged, replace them with new ones.

4. Limpeza das rodas:

   Inspect the driving wheels for any hair or debris that might impede movement. Clean as needed.

5. Sensores de limpeza:

   Wipe the sensors (located on the bottom and front of the vacuum) with a clean, dry cloth to ensure proper navigation.

Solução de problemas

If you encounter issues with your Mahli Robotic Vacuum, please refer to the following common problems and solutions:

Especificações

Garantia e Suporte

Mahli products are manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your product or visit the official Mahli webGuarde o comprovante de compra como prova de aquisição.

For further assistance, please contact Mahli Customer Service.