Lydsto HD-JJCSY01

Manual do Usuário do Bafômetro Eletrônico Lydsto HD-JJCSY01

Model: HD-JJCSY01

1. Introdução

The Lydsto Electronic Breathalyzer HD-JJCSY01 is a portable device designed for measuring blood alcohol concentration (BAC) through breath analysis. It features a high-sensitivity semiconductor sensor and an LED/LCD digital display for clear and quick results. This manual provides essential information for the safe and effective use of your device.

Lydsto Electronic Breathalyzer device

Figure 1: Lydsto Electronic Breathalyzer HD-JJCSY01

2. Conteúdo da embalagem

Ao abrir a embalagem, verifique o conteúdo para garantir que todos os itens estejam presentes:

  • 1 x Lydsto Electronic Breathalyzer
  • 5 x Replaceable Mouthpieces
  • 1 x bolsa de armazenamento
  • 1 x Manual do Usuário

Observação: São necessárias 3 pilhas AAA para o funcionamento, que não estão incluídas na embalagem.

Contents of the Lydsto Breathalyzer package including device, mouthpieces, pouch, and manual

Figura 2: Conteúdo da embalagem

3. Configuração

  1. Instale as baterias: Open the battery compartment cover on the back of the device. Insert 3 AAA batteries, ensuring correct polarity (+/-). Close the cover securely.
  2. Attach Mouthpiece: Select one of the provided mouthpieces and firmly insert it into the designated port on the side of the breathalyzer.
Frente view of the Lydsto Breathalyzer with a mouthpiece attached

Figure 3: Device with Mouthpiece Attached

4. Instruções de operação

For accurate results, it is recommended to wait at least 20 minutes after your last alcohol consumption before performing a test.

  1. Ligar: Press and hold the power button (usually located on the front of the device) for approximately 1 second to turn on the breathalyzer.
  2. Aquecimento: The device will display a "Warm-up" countdown (typically 10 seconds). Wait for the countdown to complete.
  3. Iniciar teste: Once the warm-up is complete, the display will indicate it is ready for testing. Take a deep breath.
  4. Blow into Mouthpiece: Blow steadily and continuously into the mouthpiece for 4 to 5 seconds. A normal, consistent breath is sufficient; do not blow excessively hard.
  5. Resultados da leitura: The test result will be displayed on the LCD screen within 3 seconds. The result is typically shown in mg/L or g/L.
  6. Vários testes: For improved accuracy, it is advisable to perform three consecutive tests. Take the average value of these three tests for a more reliable result.
  7. Desligamento automático: O dispositivo desligará automaticamente após 10 segundos de inatividade para economizar bateria.
Person holding the Lydsto Breathalyzer and performing a test, showing the digital display

Figure 4: Performing a Breath Test

Close-up of the Lydsto Breathalyzer showing the single power button and replaceable mouthpiece

Figure 5: Single Button Operation and Replaceable Mouthpiece

5. Manutenção

  • Mouthpiece Cleaning: The provided mouthpieces are washable and reusable. After use, detach them from the device and wash with mild soap and water. Rinse thoroughly and allow to air dry completely before reattaching or storing.
  • Limpeza do dispositivo: Wipe the exterior of the breathalyzer with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
  • Armazenar: When not in use, store the breathalyzer and its accessories in the provided storage pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Substituição da bateria: Replace batteries when the low battery indicator appears on the display to ensure optimal performance.

6. Solução De Problemas

  • O dispositivo não liga:
    Ensure batteries are correctly installed with proper polarity. Replace with fresh AAA batteries if necessary.
  • Leituras imprecisas ou inconsistentes:
    Ensure you have waited at least 20 minutes after consuming alcohol. Perform multiple tests and average the results. Avoid testing in areas with strong odors or smoke.
  • Loud alarm after a high reading:
    This is a normal function to alert the user of a high alcohol level. To silence the alarm, turn off the device by pressing and holding the power button.
  • Display shows "Err" or other error message:
    Turn off the device and restart it. If the error persists, ensure the mouthpiece is correctly attached and you are blowing steadily.

7. Especificações

RecursoEspecificação
Número do modeloHD-JJCSY01
Tipo de sensorHigh-sensitivity Semiconductor
Faixa de medição0.00 g/L to 2.00 g/L
MostrarLED/LCD Digital Display
Fonte de energia3 x pilhas AAA (não incluídas)
Dimensões (C x L x A)11.2 x 2.9 x 6.1 cm
Peso100 g
Close-up of the internal semiconductor chip of the Lydsto Breathalyzer

Figure 6: High-Sensitivity Semiconductor Sensor

8. Informações de segurança

This device is intended for informational purposes only and should not be used to determine fitness to drive or operate machinery. Blood alcohol concentration (BAC) results can vary based on individual physiology, metabolism, and recent consumption of food or beverages. Official legal limits vary by region, and official tests should always be performed by authorized personnel.

The data provided by this device is for reference only and does not constitute legal proof. Always adhere to local laws and regulations regarding alcohol consumption and driving.

Table showing conversion of alcohol concentration in air to blood alcohol concentration and a scale of driving danger levels

Figure 7: Alcohol Concentration Conversion and Danger Levels (Illustrative)

9. Garantia e Suporte

For technical support, warranty inquiries, or any questions regarding your Lydsto Electronic Breathalyzer HD-JJCSY01, please contact Lydsto customer service through the retailer's platform or the official Lydsto webPor favor, guarde o comprovante de compra como prova para eventuais solicitações de garantia.