Segotep Lux-S Mid-Tower Gaming PC Case Instruction Manual

1. Introdução

Thank you for choosing the Segotep Lux-S Mid-Tower Gaming PC Case. This manual provides essential information for the proper assembly, installation, and maintenance of your new PC case. Please read these instructions carefully before beginning the installation process to ensure optimal performance and longevity of your components.

2. Informações de segurança

• Desligue sempre a fonte de alimentação da tomada antes de instalar ou remover qualquer componente.
• Handle all components with care to prevent damage from static electricity. Consider using an anti-static wrist strap.
• Be cautious of sharp edges inside the case.
• Mantenha as peças pequenas e os parafusos longe do alcance de crianças.
• Ensure proper ventilation around the assembled PC to prevent overheating.

3. Conteúdo da embalagem

Por favor, verifique se todos os itens estão presentes em sua embalagem:

• Segotep Lux-S Mid-Tower PC Case
• 3 x 120mm Front Fans (pre-installed)
• Caixa de acessórios (contendo parafusos, espaçadores, abraçadeiras, etc.)
• Manual do usuário (este documento)

4. Produto acabadoview

The Segotep Lux-S is a stylish mid-tower gaming case featuring a full crystal-style design and transparent tempered glass side panels for showcasing your build. It is designed for efficient airflow and easy component installation.

Principais características:

• Suporte para placa-mãe: Compatible with ATX, Micro-ATX, and ITX motherboards.
• Resfriamento: Includes three pre-installed 120mm front fans. Supports additional fans and air cooling solutions.
• Filtragem de poeira: Equipped with a magnetic anti-dust mesh on the top panel.
• Armazenar: Supports two 3.5" HDDs or one 3.5" HDD and one 2.5" SSD.
• Painéis laterais: Tempered glass side panels for an aesthetic view de componentes internos.

Figura 4.1: Vista frontal view of the Segotep Lux-S PC Case, highlighting the RGB fans and tempered glass panel.

Figura 4.2: Visão de cima para baixo view of the case, illustrating the magnetic dust filter on the top panel and the front I/O ports.

Figure 4.3: Interior layout of the Segotep Lux-S, detailing the motherboard mounting area, cable routing cutouts, and drive bay locations.

5. Configuração e instalação

5.1 Removing Side Panels

Carefully remove the tempered glass side panel(s) by unscrewing the thumb screws located at the rear of the case. Place the panels on a soft, flat surface to prevent scratches.

5.2 Instalação da placa-mãe

1. Install the I/O shield that came with your motherboard into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor.
3. Fixe a placa-mãe utilizando os parafusos apropriados que constam na caixa de acessórios.

5.3 Instalação da Unidade de Fonte de Alimentação (PSU)

Install your PSU into the dedicated compartment at the bottom rear of the case. Secure it with screws from the accessory box.

5.4 Instalação da unidade de armazenamento

• Discos rígidos de 3.5": Locate the drive cage at the bottom of the case. Slide the HDDs into the trays and secure them with screws. The case supports up to two 3.5" HDDs.
• SSDs de 2.5": SSDs can be mounted on designated brackets, typically behind the motherboard tray or within the HDD cage. Secure with screws. The case supports one 2.5" SSD if one 3.5" HDD is used.

5.5 Placa gráfica e placas de expansão

Remove the necessary PCIe slot covers at the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

5.6 Gerenciamento de cabos

Utilize os recortes para passagem de cabos e os pontos de fixação atrás da bandeja da placa-mãe para organizar os cabos. Isso melhora o fluxo de ar e a estética.

5.7 Connecting Front I/O and Fan Cables

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Connect the pre-installed 120mm front fans to your motherboard's fan headers or a fan controller, if applicable.

6. Instruções de operação

After all components are securely installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel to start your computer.

Figura 6.1: Close view of the three 120mm RGB fans pre-installed at the front of the Segotep Lux-S case.

Fan and Lighting Control:

The pre-installed fans may have RGB lighting. Depending on your motherboard and fan connections, you may be able to control the fan speed and lighting effects through your motherboard's software or a dedicated controller (if included or purchased separately).

7. Manutenção

• Limpeza do filtro de poeira: The top panel features a magnetic dust filter. Regularly remove and clean it with water or a soft brush to maintain optimal airflow and prevent dust buildup inside the case.
• Limpeza geral: Use um pano macio e macioamp cloth to clean the exterior of the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.
• Remoção interna de poeira: Periodically open the case and use compressed air to remove dust from internal components, especially heatsinks and fans.

8. Solução De Problemas

8.1 Computer Does Not Power On

• Certifique-se de que o cabo de alimentação esteja firmemente conectado tanto à fonte de alimentação quanto à tomada da parede.
• Check that the PSU switch is in the 'ON' position.
• Verifique se o cabo do interruptor de alimentação do painel frontal está conectado corretamente ao conector da placa-mãe.
• Confirm all internal power cables (24-pin ATX, 8-pin CPU, PCIe power) are properly seated.

8.2 Ventoinhas não giram / RGB não acende

• Check that fan power cables are securely connected to the motherboard or fan controller.
• Ensure RGB cables (if separate) are connected to the appropriate RGB headers on the motherboard or controller.
• Consult your motherboard manual for proper fan and RGB header connections and software control.

8.3 Problemas de sobreaquecimento

• Ensure all case fans are operating correctly and oriented for optimal airflow (intake/exhaust).
• Limpe os filtros de poeira e os componentes internos regularmente.
• Verify that CPU cooler and GPU fans are functioning properly.

9. Especificações

10. Garantia e Suporte

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Segotep website. Guarde o comprovante de compra para solicitações de garantia.

If you encounter any issues not covered in this manual, please contact Segotep customer support for assistance.