Ergosolid H100 Gas Spring Desk Mount for 22-35 Inch LCD Screens

1. Produto acabadoview

The Ergosolid H100 is a professional gas spring desk mount designed to enhance your workspace ergonomics. It supports single LCD, TFT, or LED screens ranging from 22 to 35 inches, with a weight capacity of 2 to 12 kg. This mount features a 360-degree pivot function, tilt, and rotation capabilities, allowing for smooth and precise adjustments to achieve your ideal viewing angle. It is compatible with VESA mounting patterns of 75x75mm and 100x100mm. The integrated cable management system helps maintain a tidy and organized desk.

Image 1.1: Ergosolid H100 Gas Spring Desk Mount with a monitor.

2. O que está na caixa

Certifique-se de que todos os componentes estejam presentes antes de iniciar a instalação:

• Monitor holder (main arm assembly)
• Set of screws (for VESA mounting and desk attachment)
• Instruções de instalação
• Allen keys for adjustments

3. Configuração e instalação

The Ergosolid H100 offers two primary installation methods: desk clamp and grommet mount. Choose the method best suited for your desk.

3.1. Verificação de compatibilidade VESA

Before installation, verify your monitor's VESA compatibility and weight. This mount supports VESA patterns of 75x75mm and 100x100mm, and monitors weighing between 2 kg and 12 kg.

Image 3.1: VESA mounting pattern compatibility.

3.2. Mesa Clamp Instalação

1. Fixe a mesa clamp base to the main pole using the provided screws.
2. Posicione o clamp on the edge of your desk (desk thickness 25-80 mm).
3. Aperte o clamp Aperte os parafusos até que o suporte esteja firmemente fixado à mesa.

3.3. Instalação de suporte com ilhós

1. If your desk has a grommet hole, or if you plan to drill one, attach the grommet base to the main pole.
2. Insira a haste pelo orifício da bucha.
3. Secure the mount from underneath the desk using the provided plate and screw.

Imagem 3.2: Mesa clamp e opções de montagem com ilhós.

3.4. Conectando o monitor

1. Carefully attach your monitor to the VESA plate on the arm using the appropriate screws.
2. Ensure the screws are tightened securely but do not overtighten.

For a visual guide on installation and features, please refer to the official product video:

4. Instruções de operação

The Ergosolid H100 monitor arm provides extensive flexibility for positioning your screen.

4.1. Adjusting the Gas Spring Tension

The gas spring tension needs to be adjusted to match your monitor's weight. Use the provided Allen key to turn the adjustment screw on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at any desired height without drifting up or down.

4.2. Posicionamento do monitor

• Ajuste de altura: Gently push or pull the monitor up or down to the desired height.
• Inclinar: Tilt the monitor screen +85 degrees upwards or -30 degrees downwards to reduce glare and optimize viewângulos de inclinação.
• Giratório: Swivel the monitor arm left or right up to 360 degrees around the pole. The VESA plate also allows 180-degree swivel.
• Rotation (Pivot): Gire o monitor 360 graus para alternar entre as orientações paisagem e retrato.
• Extensão/Retração: Extend or retract the arm to bring the monitor closer or push it further away from you, with a maximum extension of 550 mm.

Image 4.1: Adjustment ranges for the Ergosolid H100 monitor arm.

4.3. Gerenciamento de cabos

Route your monitor and power cables through the integrated cable clips on the underside of the arm to keep your workspace neat and organized.

5. Manutenção

To ensure the longevity and optimal performance of your Ergosolid H100 desk mount, follow these simple maintenance guidelines:

• Limpeza regular: Limpe a montagem com um pano macio e seco.amp Use um pano para remover poeira e sujeira. Evite produtos de limpeza abrasivos.
• Verifique as conexões: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary, but do not overtighten.
• Ajuste da mola a gás: If your monitor's weight changes, or if the arm starts to drift, re-adjust the gas spring tension as described in Section 4.1.

6. Solução De Problemas

• Monitor drifts up or down: The gas spring tension is not correctly adjusted for your monitor's weight. Refer to Section 4.1 to adjust the tension.
• Monitor is wobbly: Ensure all mounting screws (both to the desk and to the monitor) are securely tightened. Check that the desk clamp or grommet mount is firmly attached to the desk.
• Difficulty moving the arm: Check if any adjustment points are overly tightened. Loosen slightly if necessary. If the gas spring is too tight or too loose, adjust it according to Section 4.1.
• Cables are not tidy: Ensure all cables are routed through the designated cable management clips on the arm.

7. Especificações

8. Garantia e Suporte

The Ergosolid H100 desk mount comes with a Garantia do fabricante de 2 anos. For any support inquiries, technical assistance, or warranty claims, please contact Ergosolid customer service through their official channels or the retailer where the product was purchased. Please retain your proof of purchase for warranty validation.