Introdução
Thank you for choosing the Lepro 5m RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor applications. Featuring high-brightness SMD5050 LEDs, a wide range of colors, and easy installation, it enhances the ambiance of any space. Please read this manual carefully before installation and use to ensure proper operation and safety.
O que está na caixa
Verifique se todos os componentes estão presentes antes de iniciar a instalação:
- LED Strip Light (5 meters) x 1
- DC12V Power Adapter x 1
- Connection Receiver x 1
- Controle Remoto x 1
- Instruction Manual (Japanese) x 1
Informações de segurança
- Este produto foi projetado para somente para uso internoNão exponha à água ou à alta umidade.
- Certifique-se de que a fonte de alimentação esteja desconectada antes da instalação ou manutenção.
- Use only the provided DC12V power adapter. Using an incompatible power supply may damage the product or pose a fire hazard.
- Não dobre a fita de LED bruscamente nem aplique força excessiva, pois isso pode danificar o circuito.
- Mantenha fora do alcance de crianças.
- If any part of the product is damaged, discontinue use immediately and contact support.
Configurar
Siga estes passos para instalar corretamente sua fita de LED:
- Prepare a superfície: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
- Medir e cortar (opcional): If a shorter length is required, cut the LED strip along the designated cut marks (indicated by a scissor icon) using scissors. Observação: Only cut at these specific marks. Cutting elsewhere will damage the strip. Cut sections cannot be reconnected without additional connectors (sold separately).
- Aplique a fita: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Conectar componentes: Connect the LED strip to the connection receiver, ensuring the arrows on both components align. Then, connect the DC12V power adapter to the receiver.
- Ligar: Plug the power adapter into a suitable power outlet. Remove the insulation sheet from the remote control before first use. Point the remote control towards the receiver and press the power button to turn on the lights.
Instruções de operação
The LED strip light is controlled using the included 44-key remote control. Ensure the remote is pointed towards the receiver for effective operation.
Funções do controle remoto:
- Ligar/desligar: Pressione o botão liga/desliga vermelho Ligar ou desligar as luzes.
- Ajuste de brilho: Use o botões de seta para cima e para baixo (labeled 'Brightness Adjust') to increase or decrease the light intensity.
- Seleção de cores: Escolha entre 20 cores predefinidas by pressing the corresponding color buttons.
- Modos DIY: O Botões DIY1-DIY6 allow you to create and save custom colors by adjusting the Red, Green, and Blue intensity using the RGB arrow buttons.
- Modos dinâmicos:
- RÁPIDO/LENTO: Ajuste a velocidade dos modos dinâmicos.
- CARRO: Cycles through all dynamic modes automatically.
- INSTANTÂNEO: Relâmpagos em cores.
- SALTAR3/SALTAR7: Alterna entre 3 ou 7 cores.
- FADE3/FADE7: Apresenta uma transição suave entre 3 ou 7 cores.
Manutenção
- Limpeza: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Armazenar: If storing the strip for an extended period, ensure it is clean and dry. Roll it loosely to prevent damage to the LEDs or circuit. Store in a cool, dry place away from direct sunlight.
- Cuidados com o adesivo: The 3M adhesive is strong, but repeated removal and reapplication may reduce its effectiveness.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A fita de LED não acende. | 1. Power adapter not plugged in. 2. Remote control insulation sheet not removed. 3. Connections are loose or incorrect. 4. Remote control battery is dead. | 1. Ensure power adapter is securely plugged into an outlet. 2. Remove the clear plastic insulation sheet from the remote control battery compartment. 3. Check all connections, ensuring arrows align between the strip and receiver. 4. Replace the remote control battery (CR2025 or equivalent). |
| O controle remoto não está respondendo. | 1. Remote not pointed at receiver. 2. Obstruction between remote and receiver. 3. Remote control battery is dead. | 1. Point the remote directly at the receiver. 2. Remove any objects blocking the line of sight. 3. Substitua a bateria do controle remoto. |
| Some sections of the strip are not lighting up. | 1. Damage to the LED strip. 2. Incorrect cutting. | 1. Inspect the strip for physical damage. If damaged, contact support. 2. Ensure cuts were made only at designated marks. |
Especificações
- Número do modelo: PR410082-RGB-JP
- Marca: Lepro
- Tipo de fonte de luz: LED (SMD5050)
- Quantidade de LED: 150 LEDs (30 LEDs per meter)
- Comprimento da tira: 5 metros
- Consumo de energia: 18 W
- Vol de entradatage: Corrente Contínua 12 V 1.5 A
- Opções de cores: RGB (20 preset colors + DIY modes)
- Método de controle: 44-key IR Remote Control
- Uso interno / externo: Interior
- Características especiais: Dimmable, Cuttable, 3M Adhesive, PSE Certified
- Tamanho do pacote: 13.1 x 10.7 x 6.7 cm; 230 g
Garantia e Suporte
This Lepro LED Strip Light comes with a Garantia de 2 ano. If you encounter any issues or have questions regarding the product, please contact Lepro JP customer support through the retailer's platform. Provide your order details and a description of the issue for prompt assistance.
For further assistance, you can visit the official Lepro store on Amazon: Loja Lepro na Amazon
