REDARC SPFP1200

REDARC 200W Monocrystalline Portable Folding Solar Panel SPFP1200 User Manual

1. Introdução

This manual provides essential information for the safe and efficient use of your REDARC 200W Monocrystalline Portable Folding Solar Panel (Model: SPFP1200). Please read these instructions carefully before setup and operation to ensure optimal performance and longevity of your solar panel. This product is designed to convert sunlight into electrical energy for charging 12V battery systems.

2. Informações de segurança

Observe as seguintes precauções de segurança para evitar ferimentos e danos ao produto:

  • Do not attempt to disassemble, modify, or repair the solar panel. Unauthorized modifications can be dangerous and will void the warranty.
  • Manuseie o painel solar com cuidado. Evite deixá-lo cair ou submetê-lo a impactos fortes.
  • Ensure all electrical connections are secure and correctly polarized before connecting to a battery or charge controller. Incorrect wiring can cause damage.
  • Do not touch exposed wires or terminals when the panel is exposed to sunlight, as it will generate electricity.
  • Keep the solar panel away from open flames, flammable gases, and liquids.
  • Always use an appropriate solar charge controller between the solar panel and the battery to prevent overcharging and reverse current flow.
  • Keep children and pets away from the solar panel during operation.

3. Conteúdo da embalagem

Verifique se todos os itens estão presentes na embalagem:

  • REDARC 200W Monocrystalline Portable Folding Solar Panel
  • Integrated adjustable support legs
  • Connection cables (typically with Anderson-style plugs or similar)
  • Manual do usuário (este documento)

4. Configuração

Follow these steps to set up your portable folding solar panel:

  1. Desdobre o painel: Carefully unfold the solar panel sections on a flat, stable surface.
  2. Posicione as pernas: Extend and lock the integrated adjustable support legs to prop up the panel. Ensure the legs are stable and can support the panel's weight.
  3. Angle Towards the Sun: Adjust the angle of the panel using the support legs to face directly towards the sun for maximum efficiency. The optimal angle will vary depending on your location and the time of day.
  4. Connect to Charge Controller: Connect the solar panel's output cable to the input terminals of a compatible solar charge controller. Ensure correct polarity (positive to positive, negative to negative).
  5. Conectar à bateria: Connect the output terminals of the solar charge controller to your 12V battery system. Always connect the charge controller to the battery antes connecting it to the solar panel.

Image: REDARC 200W Monocrystalline Portable Folding Solar Panel in deployed state.

REDARC 200W Monocrystalline Portable Folding Solar Panel deployed with adjustable legs

This image shows the REDARC 200W Monocrystalline Portable Folding Solar Panel unfolded and set up with its adjustable legs, ready for sun exposure. The panel's dark, reflective surface indicates its monocrystalline cells, and the sturdy frame is visible.

5. Operação

Once set up, the solar panel will begin generating power when exposed to sunlight. The charge controller will regulate the power flow to your battery.

  • Carregamento do monitor: Observe the indicators on your solar charge controller to confirm that the battery is charging correctly.
  • Adjust for Sun: For best results, periodically adjust the panel's angle throughout the day to follow the sun's path.
  • Fatores ambientais: Cloud cover, shade, and dust on the panel will reduce power output.

Não foram encontrados vídeos oficiais do produto fornecidos pelo vendedor para inclusão neste manual.

6. Manutenção

Regular maintenance ensures optimal performance and extends the lifespan of your solar panel:

  • Limpeza: Clean the surface of the solar panel regularly with a soft, damp cloth to remove dust, dirt, and debris. Avoid abrasive cleaners or harsh chemicals.
  • Inspecionar conexões: Periodically check all electrical connections for corrosion, looseness, or damage. Ensure they are clean and secure.
  • Armazenar: When not in use, fold the solar panel and store it in a dry, cool place, away from direct sunlight and extreme temperatures. Use the provided carrying case if available.
  • Inspeção física: Inspect the panel for any physical damage, such as cracks in the glass or frame, before and after each use.

7. Solução De Problemas

If you encounter issues with your solar panel, refer to the table below for common problems and solutions:

ProblemaPossível causaSolução
No power output from panelNo sunlight, panel in shade, dirty panel surface, faulty connection.Move panel to direct sunlight, remove any shading, clean panel surface, check all connections.
Baixa potência de saídaPartial shading, incorrect panel angle, cloudy weather, dirty panel, undersized charge controller.Ensure full sun exposure, adjust panel angle, clean panel, verify charge controller is rated for 200W.
Bateria não carregaCharge controller fault, incorrect wiring, battery fault, insufficient solar input.Check charge controller status, verify wiring polarity, test battery, ensure adequate sunlight.
O painel parece danificado.Physical impact, improper handling.Discontinue use. Contact REDARC support for assistance. Do not attempt repairs.

8. Especificações

Key technical specifications for the REDARC 200W Monocrystalline Portable Folding Solar Panel SPFP1200:

EspecificaçãoValor
MarcaREDARC
Número do modeloSPFP1200
Potência máxima200 Watts
MaterialMonocristalino
EficiênciaAlta Eficiência
Peso do item24.2 libras (10.98 kg)
Dimensões do produto (dobrado)Aproximadamente 34.6 x 30.9 x 3.7 polegadas (87.9 x 78.5 x 9.4 cm)
EstiloAjustável, portátil
FabricanteEletrônica REDARC

9. Garantia e Suporte

REDARC products are manufactured to high standards and come with a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, are typically provided with your purchase documentation or can be found on the official REDARC website. Guarde o comprovante de compra para solicitações de garantia.

For technical support, warranty inquiries, or service, please contact REDARC customer service directly. Refer to the REDARC webSite para obter as informações de contato e recursos de suporte mais recentes.

Documentos relacionados - SPFP1200

Préview Instalação de suportes ABS REDARC para painéis solares monocristalinos fixos
Um guia sobre como instalar suportes ABS REDARC para painéis solares monocristalinos fixos em trailers e barcos sem necessidade de perfuração, garantindo a integridade da vedação. Abrange os modelos SMI9001, SMI9002, SMI9003 e SMI9007.
Préview REDARC 12V a 24V Circuito Único Voltage Boosters: VI180D, VI360D, VI720D Manual do Usuário
Este documento fornece especificações detalhadas, recursos, orientações de instalação e informações sobre a garantia do inversor de tensão de circuito único de 12 V a 24 V da série VI da REDARC.tage Boosters, incluindo os modelos VI180D, VI360D e VI720D.
Préview Painéis solares monocristalinos REDARC: modelos SMSP1050-SMSP1200 - Guia de instalação e segurança
Guia completo para painéis solares monocristalinos da REDARC (SMSP1050, SMSP1080, SMSP1120, SMSP1180, SMSP1200), abrangendo especificações, segurança, instalação, fiação e informações de garantia para aplicações em RV e caravanas.
Préview Painéis solares monocristalinos REDARC: instalação, especificações e guia de segurança
Guia completo para painéis solares monocristalinos REDARC (SMSP1050-SMSP1200), abrangendo recursos, especificações detalhadas, instruções de instalação, diagramas de fiação, precauções de segurança e informações de garantia.
Préview Kit de montagem GPC para REDARC ALPHA R 50A - Guia de instalação do INEOS GRENADIER
Guia de instalação detalhado do kit de montagem GPC para o sistema de bateria dupla REDARC ALPHA R 50A, específico para o veículo INEOS GRENADIER. Inclui instruções passo a passo, avisos de segurança e detalhes de comissionamento.
Préview REDARC BCDC ALPHA 100R: Carregador de bateria DC-DC 12V 100A com Bluetooth - Guia de Instalação
Conheça o REDARC BCDC ALPHA 100R, um carregador de baterias DC-DC de 12V 100A com monitoramento inteligente da bateria e conectividade Bluetooth. Este guia fornece detalhes sobre instalação, configuração e operação para uma gestão de energia ideal do veículo.