1. Introdução
The Milestone MPT-II is a compact and portable 58mm thermal printer designed for various business applications, including retail, restaurants, and mobile logistics. It offers high-speed, clear printing and features Bluetooth connectivity for seamless integration with Android and iOS devices. Its lightweight design and long-lasting battery make it ideal for on-the-go printing needs.
2. Principais características
- Impressão Bluetooth: Supports Android and iOS devices for wireless printing.
- Portabilidade: Light and compact design allows for printing anywhere, anytime.
- Low Operating Cost: Direct thermal printing eliminates the need for ink ribbons or cartridges, requiring only thermal paper.
- Bateria de longa duração: Built-in 7.4V/2500mAh rechargeable lithium battery provides up to 4 hours of continuous printing.
- Versatile Interface: Equipped with both USB and Bluetooth connectivity.
- ESC/POS Compatible: Supports standard ESC/POS print commands for broad software compatibility.
3. Configuração inicial
3.1 Desembalagem e Conteúdo da Embalagem
Carefully unpack the printer and verify all components are present:
- 1 x Milestone MPT-II Thermal Printer
- 1 x Cabo USB
- 1 x USB Adaptor
- 1 x rolo de papel
- 1 x Manual do Usuário (este documento)
3.2 Carregando a impressora
- Connect the USB cable to the printer's charging port.
- Plug the USB adaptor into a standard power outlet.
- The charging indicator light will illuminate. Charge the printer fully before first use (approximately 2.5-3 hours for continuous printing).
3.3 Carregando papel térmico
- Open the paper compartment cover by gently pushing the latch.
- Insert the thermal paper roll with the printing side facing outwards (as shown in Figure 2). Ensure the roll is seated correctly.
- Puxe um pequeno pedaço de papel para além da borda de corte.
- Feche bem a tampa do compartimento de papel até ouvir um clique.
4. Instruções de operação
4.1 Ligar/Desligar
- Para ligar: Pressione e mantenha pressionado o botão liga/desliga até que a luz indicadora acenda.
- Para desligar: Pressione e mantenha pressionado o botão liga/desliga até que a luz indicadora se apague.
4.2 Conexão Bluetooth
The MPT-II printer supports Bluetooth connectivity for mobile devices.
- Certifique-se de que a impressora esteja ligada e dentro do alcance do seu dispositivo móvel.
- On your mobile device (Android/iOS), go to Bluetooth settings and turn Bluetooth on.
- Procurar available devices. The printer will appear as "MPT-II".
- Select "MPT-II" to pair. If prompted for a password, enter 1234 or 0000.
- Once paired, the printer is ready for use with compatible applications.
4.3 Utilização com Aplicações
For mobile printing, you will need a compatible application. Milestone recommends downloading RAWBT Printer App or MYXPrint App from the Google Play Store. For iOS, search for compatible thermal printer apps in the App Store.
- Open your chosen printing application.
- Navigate to the printer settings within the app.
- Select the "MPT-II" printer from the list of available Bluetooth devices.
- You can now send print commands from the application.
4.4 USB Connection (for PC)
The printer can also be connected to a PC via USB. You may need to install a printer driver, which is typically available from the manufacturer's website or included on a CD with the product (if applicable).
5. Manutenção
5.1 Limpando a Impressora
To ensure optimal performance and print quality, regularly clean the printer:
- Cabeça de impressão: Use um cotonete levementeampLimpe delicadamente a cabeça de impressão térmica com álcool isopropílico. Deixe secar completamente antes de usar.
- Caminho do papel: Use um pano macio e seco ou uma escova pequena para remover qualquer pó ou resíduo de papel do caminho do papel.
- Exterior: Limpe a parte externa da impressora com um pano macio e seco.amp pano. Evite usar produtos químicos agressivos ou produtos de limpeza abrasivos.
5.2 Cuidados com a bateria
- Carregue a bateria totalmente antes do primeiro uso.
- Evite descarregar completamente a bateria com frequência.
- If storing the printer for an extended period, charge it to about 50% and recharge every few months to prevent battery degradation.
6. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A impressora não liga. | A bateria está fraca ou descarregada. | Charge the printer using the provided USB cable and adaptor. |
| Não consigo conectar via Bluetooth. | Bluetooth is off on device; incorrect pairing password; printer not discoverable. | Ensure Bluetooth is enabled on your device. Re-attempt pairing with password 1234 or 0000. Restart both printer and device. |
| No print output or blank paper. | Paper loaded incorrectly; out of paper; print head dirty. | Check paper orientation (printing side out). Replace paper roll if empty. Clean the thermal print head (refer to Maintenance section). |
| Poor print quality (faded, lines). | Print head dirty; low battery; poor quality thermal paper. | Clean the print head. Charge the printer fully. Use high-quality thermal paper. |
| Printer beeps continuously. | Paper alarm (out of paper or paper jam); low battery reminder. | Check and replace paper roll or clear jam. Charge the printer. |
7. Especificações técnicas
| Recurso | Especificação |
|---|---|
| Método de impressão | Impressão de linha térmica |
| Largura de impressão | Paper width 58mm, effective width 58mm |
| Densidade de impressão | 576 ponto/linha |
| Resolução | 8 dots/mm, 203 DPI |
| Velocidade de impressão | 70mm/s (Max Print speed Monochrome: 50 ppm) |
| Printer Core Life | 50KM (25% print density or less than 100 million pulses) |
| Printable Content | English, numbers, symbols, characters, pictures, 1D/2D barcode, multi-languages |
| Interface de comunicação de dados | USB / Bluetooth |
| Fonte de energia | Machine charging 9V-1.5A |
| Bateria | Built-in rechargeable 2600mAh lithium-ion battery (7.4V/2500mAh) |
| Continuous Printing Time | 2.5-3 horas |
| Conjunto de instruções | Compatível com ESC/POS |
| Corte de papel | Manually tear |
| Compatibilidade do sistema operacional | Android, iOS, Windows |
| Dimensões do produto | 15 cm de profundidade x 12 cm de largura x 6 cm de altura |
| Peso do item | 310 gramas |
| Componentes incluídos | 1 x Thermal Printer, 1 x USB Cable, 1 x USB Adaptor, 1 x Paper Roll, 1 x User Manual |
8. Garantia e Suporte
This product comes with a 10-day warranty as per the purchase terms. For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your retailer or the manufacturer's customer support. Refer to your purchase documentation for specific contact details.
Fabricante: Marco
Importador: SB RETAILS, SECTOR 28, PRADHIKARAN, PUNE-44, +918888881631
