Introdução
Welcome to your new Quntis Wireless Weather Station. This device provides accurate indoor and outdoor temperature and humidity readings, weather forecasts, current time, and an alarm function. It features a sensitive touch screen and supports up to three external wireless sensors for comprehensive environmental monitoring.
Conteúdo da embalagem
- 1 x Quntis Wireless Weather Station Main Unit
- 3 x Wireless External Sensors
- 1 x Manual de Instruções
Observação: as pilhas não estão incluídas e devem ser adquiridas separadamente.
Produto acimaview
The Quntis Weather Station features a clear color display and sensitive touch buttons for easy operation. The main unit displays indoor and outdoor temperature and humidity, current time, date, weather forecast, low battery indicator, and comfort level.
Figure 1: Main Unit Display and Touch Buttons - This diagram illustrates the various indicators and touch-sensitive buttons on the weather station's main display.
Each external sensor is designed for wireless transmission of temperature and humidity data to the main unit. They can be placed up to 60 meters (200 feet) away in open areas.
Figure 2: External Sensor Back Panel - Details of the external sensor's battery compartment and control switches.
Configurar
1. Instalando baterias
- Open the battery compartment on the back of the main unit and each external sensor.
- Insert 2 x AA batteries (not included) into the main unit, observing polarity (+/-).
- Insert 2 x AA batteries (not included) into each external sensor, observing polarity (+/-).
- Feche os compartimentos da bateria com segurança.
Figura 3: Instalação da bateria - The main unit and sensors require AA batteries.
2. Emparelhamento de sensores
The main unit should automatically connect with the sensors once batteries are installed. If connection is not established:
- Ensure the main unit and sensors are within range (max 60m/200ft in open air).
- On each external sensor, select a unique channel (CH1, CH2, or CH3) using the "Channel Switch" inside the battery compartment (refer to Figure 2).
- On the main unit, press and hold the "CH" touch button for 3 seconds to initiate a search for sensors. The main unit will cycle through channels and display readings once connected.
3. Initial Settings (Time, Date, Temperature Unit)
- Definir hora e data: Press and hold the "SET" part of the "°C/°F SET" touch button for 3 seconds to enter time setting mode. Use the "MEM" and "CH" buttons to adjust values and "SET" to confirm and move to the next setting (Hour -> Minute -> Year -> Month -> Day).
- Selecione a unidade de temperatura: Briefly touch the "°C/°F" part of the "°C/°F SET" button to switch between Celsius (°C) and Fahrenheit (°F).
Instruções de operação
1. Exibir sobreview
The main display provides a comprehensive view of environmental data:
- Temperatura e umidade internas: Leituras atuais para a localização da unidade principal.
- Temperatura e umidade externas: Readings from the currently selected external sensor.
- Previsão do tempo: Icons indicating predicted weather conditions (Sunny, Cloudy, Rainy, Sunset).
- Hora e data: Hora e data atuais.
- Nível de conforto: An icon indicating the indoor comfort level based on humidity (WET: 70-95%, COM: 40-70%, DRY: 20-40%).
- Lembrete da bateria baixa: An icon appears when batteries in the main unit or a sensor are low.
Figure 4: Weather Forecast Icons - The display shows predicted weather conditions.
2. Seleção de canal
Para view data from different external sensors, briefly touch the "CH" button. The display will cycle through CH1, CH2, CH3, and then an automatic cycle mode (displaying each channel for a few seconds).
Figure 5: Switching Between Channels - Use the CH button to view data from different sensors.
3. Alarm Clock and Snooze Function
The weather station includes an alarm clock with a default 5-minute snooze function.
- Configurando o alarme: Press and hold the "MEM" button to enter alarm setting mode. Use "MEM" and "CH" to adjust the alarm time and "SET" to confirm.
- Ativando/Desativando Alarme: Briefly press the "MEM" button to toggle the alarm on/off. An alarm icon will appear/disappear on the display.
- Soneca: When the alarm sounds, press the "Snooze/Light" button (usually located on top) to activate snooze. The alarm will sound again after 5 minutes.
- Parar o alarme: To stop the alarm completely, press any button other than "Snooze/Light", or press and hold "Snooze/Light" for more than 2 seconds.
4. Registros de temperatura e umidade máximas e mínimas
The weather station records the maximum and minimum temperature and humidity values for both indoor and outdoor environments.
- Briefly touch the "MEM" button to display the maximum recorded values (MAX).
- Touch the "MEM" button again to display the minimum recorded values (MIN).
- Touch the "MEM" button a third time to return to current readings.
- To clear the MAX/MIN records, press and hold the "MEM" button for 3 seconds while MAX or MIN values are displayed.
Figure 6: Max/Min Records - Access historical temperature and humidity data.
5. Operação da luz de fundo
To illuminate the display in low light conditions, briefly press the "Snooze/Light" button (usually on top of the unit). The backlight will activate for 8 seconds and then turn off automatically to conserve battery power.
Figure 7: Backlight Feature - Provides temporary illumination for viewexibindo a tela no escuro.
Manutenção
1. Substituição da bateria
When the low battery indicator appears on the display, replace the batteries in the main unit or the corresponding sensor promptly to ensure continuous operation and accurate readings.
2. Limpeza
Limpe a unidade principal e os sensores com um pano macio e seco.amp pano. Não utilize produtos de limpeza abrasivos nem mergulhe os dispositivos em água.
3. Colocação do Sensor
For optimal performance, place external sensors in a shaded, dry location away from direct sunlight and rain. Ensure they are within the 60-meter (200-foot) wireless range of the main unit, minimizing obstacles like thick walls.
Figure 8: Recommended Sensor Placement -Examples of suitable locations for external sensors.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Sem visor na unidade principal. | As pilhas estão descarregadas ou instaladas incorretamente. | Verifique a polaridade das pilhas e substitua-as por pilhas AA novas. |
| Outdoor readings are not displayed or inaccurate. | Sensor fora do alcance, bateria do sensor fraca ou interferência. | Move sensor closer to the main unit, replace sensor batteries, or re-pair the sensor (hold CH button on main unit). Ensure sensor is not in direct sunlight or rain. |
| A data e a hora estão incorretas. | Time not set or reset after battery change. | Manually set the time and date as per "Initial Settings" section. |
| A luz de fundo não está funcionando. | Low main unit battery or button malfunction. | Replace main unit batteries. If issue persists, contact support. |
Especificações
- Modelo: WDJ-JD5030120
- Marca: Quentis
- Dimensões (Unidade Principal): 15 x 9.5 x 1.1 cm (5.9 x 3.74 x 0.43 polegadas)
- Peso: 380 gramas
- Fonte de energia: Battery powered (2 x AA for main unit, 2 x AA for each sensor)
- Tipo de exibição: Tela sensível ao toque
- Conectividade: Wireless (up to 3 external sensors)
- Alcance sem fio: Até 60 metros (200 pés) em áreas abertas.
- Características especiais: Indoor/Outdoor Temperature & Humidity, Weather Forecast, Alarm Clock, Snooze Function, Max/Min Records, Backlight, Comfort Level Indicator.
Figura 9: Dimensões do produto - Measurements for the main unit and external sensor.
Garantia e Suporte
For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Quntis webGuarde o comprovante de compra como prova de aquisição.
