Produto acimaview
The Orbit Programmable Hose Faucet Timer is designed to automate your watering schedule, providing convenience and water conservation. This 2-outlet timer allows you to control two separate watering zones from a single faucet. Its large, easy-to-read LCD screen and intuitive dial make programming simple. Key features include flexible scheduling options, a rain delay function, and the ability to manually bypass programmed watering without interruption.
Imagem: Frente view of the Orbit 2-Outlet Hose Faucet Timer, showing the digital display, control dial, and buttons.
Configurar
- Instalação da bateria: The timer requires two AA batteries (not included). Open the battery compartment on the back of the unit, insert the batteries, ensuring correct polarity, and securely close the compartment.
- Connecting to Faucet: Screw the timer onto any standard outdoor faucet. Ensure the connection is hand-tight to prevent leaks. Do not overtighten.
Image: The Orbit 2-Outlet Hose Faucet Timer securely attached to an outdoor garden faucet, with hoses connected to its two outlets.
- Mangueiras de conexão: Attach your garden hoses or watering systems to the two outlets at the bottom of the timer.
- Abra a torneira da água: Fully open the faucet to which the timer is connected. The timer will regulate the water flow.
Instruções de operação
The timer features a large dial for selecting programming modes and intuitive buttons for adjustments.
Imagem: Uma imagem detalhada view of the timer's rotary dial, showing settings like SET CLOCK, START TIME, HOW LONG, HOW OFTEN, OFF, and AUTO.
Image: A close-up of the timer's control buttons, including plus (+), minus (-), STATION, and MANUAL/CLEAR.
1. Acerte o Relógio
- Gire o dial para AJUSTAR RELÓGIO.
- Use o + e - botões para definir a hora atual.
- Pressione o ESTAÇÃO button to switch between outlets if programming them individually (though this model typically programs both simultaneously for time settings).
2. hora de início
- Gire o dial para HORA DE INÍCIO.
- Use o + e - buttons to set your desired watering start time.
3. How Long (Watering Duration)
- Gire o dial para QUANTO TEMPO.
- Use o + e - buttons to set the watering duration from 1 to 240 minutes.
4. How Often (Watering Frequency)
- Gire o dial para COM QUE FREQUÊNCIA.
- Use o + e - buttons to set the watering frequency from every 6 hours up to every 7th day.
5. Função de Retardo por Chuva
- Gire o dial para AUTO.
- Pressione o + button to activate the rain delay. Each press will cycle through 24, 48, or 72 hours of delay. The timer will resume its schedule after the delay period.
6. Rega manual
- Gire o dial para AUTO.
- Pressione o MANUAL/LIMPAR botão.
- Use o + e - buttons to set the desired manual watering duration.
- Imprensa MANUAL/LIMPAR again to start manual watering. To stop manual watering, press MANUAL/LIMPAR once more. This function does not interrupt your programmed schedule.
7. Desligando
- Gire o dial para DESLIGADO to stop all automatic watering.
Manutenção
- Substituição da bateria: Replace batteries annually or when the low battery indicator appears on the display. Always use fresh AA alkaline batteries.
- Limpeza: Periodically clean the exterior of the timer with a soft, damp pano. Não use produtos de limpeza abrasivos ou solventes.
- Winterização: Before the first frost, remove the timer from the faucet and drain any remaining water. Store the timer indoors in a dry, protected area where temperatures remain above 32°F (0°C) to prevent damage from freezing.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| O temporizador não liga/o visor está em branco. | Baterias descarregadas ou instaladas incorretamente. | Substitua as pilhas por pilhas AA novas, certificando-se da polaridade correta. |
| A água não flui. | Faucet is off; timer is set to OFF; low water pressure; clogged filter. | Ensure faucet is fully open. Turn dial to AUTO. Check water pressure. Clean the filter washer located at the timer's inlet. |
| Timer continuously waters or leaks. | Internal valve malfunction; loose connection. | Ensure connections are hand-tight. If continuous watering persists, the internal mechanism may be faulty. Contact customer support. |
| A programação não está sendo executada. | Timer is in OFF or Rain Delay mode; incorrect programming. | Ensure dial is set to AUTO. Check rain delay status. Re-program the schedule carefully following instructions. |
Especificações
- Marca: Órbita
- Número do modelo: 58910
- Dimensões do produto: 5"P x 2"L x 3"A
- Material: Plástico
- Cor: Verde
- Número de configurações: 15
- Fonte de energia: 2 Pilhas AA (não incluídas)
- Peso do item: 2.54 libras
- País de origem: China
- Código UPC: 840041546767
Garantia e Suporte
For detailed warranty information and further support, please refer to the official user guide provided by Orbit. A digital version of the user guide can often be found on the product's listing page or the manufacturer's website.
Você pode acessar o Guia do usuário (PDF) for more comprehensive instructions and support.
