Produto acimaview
The FIILPOW Cordless Robotic Pool Cleaner is designed for efficient and convenient cleaning of above-ground pools up to 800 sq.ft. Its cordless design eliminates the hassle of tangled wires, offering a safe and user-friendly experience. Featuring intelligent auto-docking and powerful suction, this robotic vacuum ensures a thorough clean with minimal effort.
Image: The FIILPOW Cordless Robotic Pool Cleaner, showcasingraças ao seu design compacto e moderno.
Conteúdo da embalagem
Antes de começar, verifique se todos os componentes estão presentes na embalagem:
- 1x Robotic Cleaner Unit
- 1x Bottom Brush
- 2x Swing Plates
- 1x Manual do Usuário
- 1x Tow Rope
- 1x Floating Handle
- 1x Adapter Charger
Image: All components included with the FIILPOW Robotic Pool Cleaner, including the main unit, brush, swing plates, user manual, tow rope, floating handle, and adapter charger.
Instruções de configuração
Follow these steps for the initial setup of your robotic pool cleaner:
- Conjunto: Attach the bottom brush and swing plates to the robotic cleaner as indicated in the included user manual. Ensure all parts are securely fastened.
- Carga inicial: Before first use, fully charge the robotic cleaner. Connect the adapter charger to the unit and plug it into a power outlet. The charging time is approximately 5 hours. The charging indicator light on the charger will change color when charging is complete.
- Colocação: Once fully charged, place the cleaner gently into the pool. Ensure it sinks to the bottom.
Video: An advertising video demonstrating the robotic pool cleaner in action, highlighting its ease of use and setup.
Instruções de operação
Operating your FIILPOW robotic pool cleaner is simple:
- Comece a limpeza: Turn the knob on the cleaner to the 'ON' position. Gently lower the cleaner into the pool until it rests on the bottom. The cleaner will begin its cleaning cycle automatically.
- Limpeza automática: The cleaner will navigate the pool floor, utilizing its suction doors and bottom brush to collect leaves, dirt, and sand. It is equipped with a 1805m fine filter for effective debris capture. The cleaner can operate for up to 90 minutes on a full charge.
- Intelligent Auto-Docking: When the cleaning cycle is complete or the battery level is low, the cleaner will automatically move to the side of the pool for easy retrieval.
- Recuperação: Use the floating handle to pull the cleaner out of the pool.
Image: The cordless robotic pool cleaner operating in a pool, illustrating the freedom from tangled hoses and cords.
Image: The robotic pool cleaner intelligently stopping and auto-docking at the edge of the pool when its battery is low, with a floating handle for easy retrieval.
Image: The underside of the robotic pool cleaner, highlighting its dual suction doors and bottom brush for effective debris collection.
Image: A hand easily lifting the lightweight robotic pool cleaner from the pool, demonstrating its portability and ease of handling.
Image: A diagram illustrating how the robotic pool cleaner adjusts its nozzle angle (0-200 for regular pools, 0-400 for irregular shapes) to clean various pool designs effectively.
Video: A demonstration of the FIILPOW pool vacuum's working status, showing its movement and cleaning process in a pool.
Manutenção
A manutenção regular garante o desempenho ideal e a longevidade do seu aspirador:
- Limpeza do filtro: After each use, remove the filter tray and chassis. Rinse them thoroughly with water to remove collected dirt and debris. Ensure the filter is completely clean before reassembling.
- Armazenar: Store the cleaner in a cool, dry place away from direct sunlight when not in use. Ensure the unit is dry before storage.
- Cuidados com a bateria: For prolonged periods of non-use, it is recommended to charge the battery periodically (e.g., once every 3 months) to maintain battery health.
Image: A person rinsing the filter tray of the robotic pool cleaner, demonstrating the easy-to-wash design for quick cleaning.
Solução de problemas
If you encounter issues with your FIILPOW robotic pool cleaner, refer to the following common problems and solutions:
| Problema | Possível causa | Solução |
|---|---|---|
| O aspirador não liga | Bateria fraca; Interruptor de alimentação desligado; Obstrução | Charge the cleaner fully; Ensure power switch is ON; Check for and remove any debris blocking movement. |
| Cleaner stops prematurely | Low battery; Filter clogged; Overheating | Recharge the cleaner; Clean the filter tray; Allow unit to cool down before restarting. |
| Baixo desempenho de limpeza | Filter clogged; Suction doors blocked; Worn brush | Clean the filter thoroughly; Clear any obstructions from suction doors; Inspect and replace the bottom brush if worn. |
| Cleaner does not auto-dock | Battery completely depleted; Obstruction at pool edge | Manually retrieve and charge; Clear pool edge of obstacles. |
Especificações
| Recurso | Detalhe |
|---|---|
| Nome do modelo | PR800 |
| Fonte de energia | DC |
| Recurso especial | Sem fio |
| Tipo de motor | Elétrico |
| Método de controle | Remote (implied by product type, but manual operation is primary) |
| Capacidade de carga | 1.5 libras |
| Conteúdo de energia da bateria de lítio | 5.4E+6 Milliampantes da hora (mAh) |
| Tempo de carregamento | 5 horas |
| Tempo de execução | Até 90 minutos |
| Área da piscina Max | 800 pés quadrados |
| Finura do filtro | 1805m |
| Dimensões do produto | 15.7"C x 14.2"L x 10.6"A |
| Peso do item | 15.32 libras |
| Material | Fibra de vidro |
| Cor | Verde |
| UPC | 766382620730 |
Garantia e Suporte
The FIILPOW Cordless Robotic Pool Cleaner comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the official documentation provided with your purchase.
Para obter mais assistência, suporte técnico ou para view the original user manual in PDF format, please visit the official FIILPOW Store on Amazon ou consulte o Manual do usuário (PDF).
