GEWISS P-COMFORT GWD6916 Wired Load Management Relay User Manual

1. Introdução

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the GEWISS P-COMFORT GWD6916 Wired Load Management Relay. Please read this manual thoroughly before attempting any installation or operation.

The GEWISS P-COMFORT GWD6916 is designed to manage electrical loads in an installation, optimizing energy consumption and preventing overloads. It is a wired version, ensuring reliable communication and control.

Informações de segurança

• Instalação profissional: Installation and maintenance must be performed by qualified personnel in accordance with local electrical codes and regulations.
• Desconecte a energia: Always disconnect the main power supply before performing any installation, wiring, or maintenance procedures.
• Volumetage: Garantir o fornecimento voltage matches the device's specifications (250 Volt).
• Condições ambientais: Não exponha o dispositivo à umidade, temperaturas extremas ou ambientes corrosivos.

2. Conteúdo da embalagem

Ao abrir a embalagem, verifique se todos os itens estão presentes e sem danos:

• 1 x GEWISS P-COMFORT GWD6916 Wired Load Management Relay
• 1 x Manual de Instruções (este documento)

Imagem 1: Frente view of the GEWISS P-COMFORT GWD6916 Wired Load Management Relay. The image shows the compact housing, terminal blocks for wiring, and indicator lights.

3. Instalação

Follow these steps for proper installation of the GEWISS P-COMFORT GWD6916 relay.

3.1 Montagem

1. Selecione o local: Choose a suitable location within an electrical enclosure, ensuring adequate ventilation and protection from environmental factors.
2. Montagem: The relay is designed for DIN rail mounting. Securely attach the device to the DIN rail until it clicks into place.

3.2 fios

Aviso: Ensure power is disconnected before proceeding with wiring.

1. Fonte de energia: Connect the main power supply (250 Volt) to the designated input terminals as indicated on the device's wiring diagram.
2. Conexões de carga: Connect the loads to be managed by the relay to the output terminals. Ensure correct polarity and current ratings are observed.
3. Entrada de controle: Connect the control signal (e.g., from a master load management unit or energy meter) to the dedicated control input terminals. This signal dictates when loads should be shed or reconnected.
4. Aterramento: Ensure proper grounding of the device and associated electrical components.

Refer to the detailed wiring diagram printed on the device or included in the packaging for specific terminal assignments.

4. Operação

Once installed and wired correctly, the GEWISS P-COMFORT GWD6916 relay operates automatically based on the control input it receives.

4.1 Inicialização e verificação inicial

1. Restaurar energia: After completing all wiring and safety checks, restore power to the installation.
2. Luzes indicadoras: Observe the indicator lights on the relay. A power indicator should illuminate, confirming the device is receiving power. Other indicators will show the status of the loads being managed.

4.2 Load Management Function

The relay functions by switching connected loads ON or OFF in response to a control signal. Typically, this signal originates from a central load management system that monitors total energy consumption. When the total consumption exceeds a predefined threshold, the control system signals the relay to disconnect non-essential loads (load shedding) to prevent an overload. When consumption drops, the loads are reconnected.

4.3 Indicadores de Status

The relay features LED indicators to provide visual feedback on its operational status:

• LED de energia: Indicates that the device is powered ON.
• LED de status: May indicate operational status, errors, or communication status with the control unit. Refer to the device's specific documentation for LED behavior.
• Load Status LEDs: Individual LEDs may indicate the ON/OFF status of each controlled load.

5. Manutenção

The GEWISS P-COMFORT GWD6916 relay is designed for reliable, long-term operation with minimal maintenance.

• Limpeza: Limpe periodicamente a parte externa do dispositivo com um pano macio e seco. Não utilize produtos de limpeza abrasivos ou solventes.
• Inspeção: Annually, or as required by local regulations, have a qualified electrician inspect the wiring connections for tightness and signs of wear or damage.
• Nenhuma peça que possa ser reparada pelo usuário: The device contains no user-serviceable parts. Do not attempt to open or repair the unit.

6. Solução De Problemas

If you encounter issues with your GEWISS P-COMFORT GWD6916 relay, refer to the following common problems and solutions:

For issues not listed above or if troubleshooting steps do not resolve the problem, contact a qualified electrician or Gewiss technical support.

7. Especificações

8. Garantia e Suporte

The GEWISS P-COMFORT GWD6916 is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Gewiss website para obter termos e condições detalhados da garantia.

For technical assistance, product inquiries, or warranty claims, please contact Gewiss customer support through their official channels. Ensure you have your product model number (GWD6916) and purchase details available when contacting support.

Gewiss Official Website: www.gewiss.com