VONROC 1500W 216mm Electric Sliding Miter Saw Instruction Manual

1. Instruções de segurança

Always observe basic safety precautions when using this electric sliding miter saw to reduce the risk of fire, electric shock, and serious personal injury. Read all instructions carefully before operation.

Segurança geral de ferramentas elétricas

• Segurança da Área de Trabalho: Mantenha a área de trabalho limpa e bem iluminada. Áreas desorganizadas ou escuras aumentam o risco de acidentes. Não utilize ferramentas elétricas em atmosferas explosivas, como na presença de líquidos, gases ou poeira inflamáveis.
• Segurança elétrica: Os plugues das ferramentas elétricas devem ser compatíveis com a tomada. Nunca modifique o plugue de nenhuma forma. Evite o contato do corpo com superfícies aterradas, como canos, radiadores, fogões e geladeiras.
• Segurança pessoal: Always wear eye protection (safety goggles) and hearing protection. Use a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.

Miter Saw Specific Safety

• Segurança da lâmina: Ensure the blade is sharp and correctly installed. Never attempt to cut freehand. Always use the material clamp and fence to secure the workpiece.
• Guia a laser: Do not stare directly into the laser beam. The laser is a Class 2 laser product.
• Coleta de pó: Connect a dust extraction device or use the provided dust bag to minimize dust exposure.
• Comece: The saw features a soft start system. Allow the blade to reach full speed before beginning a cut.

2. Produto acabadoview

The VONROC 1500W 216mm Electric Sliding Miter Saw is designed for precise cutting of wood, laminate, and similar materials. It features a powerful motor, a sliding function for wider cuts, and a laser guide for accuracy.

Componentes principais

• Saw Head with Motor and Blade
• Trilhos deslizantes
• Base Plate / Turntable
• Miter Scale and Lock Handle
• Bevel Adjustment and Lock
• Peça de trabalho Clamp
• Tabelas de extensão
• Dust Port and Dust Bag
• Guia Laser

Figura 1: Completo view of the VONROC 1500W 216mm Electric Sliding Miter Saw.

3. Configuração

Desembalagem e montagem

1. Remova cuidadosamente todos os componentes da embalagem.
2. Inspect the saw for any damage that may have occurred during transit. Do not operate if damaged.
3. Attach the dust bag to the dust port at the rear of the saw head.
4. Install the extension tables on both sides of the base plate, securing them with the provided fasteners.

Montando a serra

For stable operation, it is recommended to mount the miter saw to a workbench or a dedicated miter saw stand. Use the mounting holes in the base of the saw and appropriate hardware (not included) to secure it firmly.

Ajustando a cerca

The fence provides support for the workpiece. Ensure it is properly aligned and secured before making any cuts. The fence can be adjusted for different cutting angles and material thicknesses.

Figure 2: The sliding mechanism and adjustable fence provide support and allow for wider cuts.

Laser Guide Alignment

The laser guide projects a line onto the workpiece, indicating the cutting path. To activate, press the laser button. If the laser line is not aligned with the blade's kerf, consult the troubleshooting section for adjustment instructions.

Figure 3: The integrated laser guide assists in precise cutting by projecting a visible line.

4. Operação

Procedimentos básicos de corte

1. Fixar a peça de trabalho: Place the workpiece firmly against the fence and base. Use the material clamp to hold it securely.
2. Definir ângulo: Adjust the miter angle by loosening the lock handle, rotating the turntable to the desired angle (e.g., 0°, 15°, 22.5°, 30°, 45°), and then tightening the lock handle.
3. Set Bevel: For bevel cuts, loosen the bevel lock, tilt the saw head to the desired angle (e.g., 0° to 45°), and tighten the lock.
4. Iniciar serra: Press the trigger switch. Allow the blade to reach full speed before lowering it into the workpiece.
5. Fazer o corte: Slowly lower the saw head through the workpiece. For sliding cuts, pull the saw head towards you, lower it, and push it smoothly through the material.
6. Release Saw: Assim que o corte estiver completo, solte o gatilho e deixe a lâmina parar completamente antes de levantar a cabeça da serra.

Figure 4: The turntable allows for precise miter angle adjustments from -45° to +45°.

Figure 5: The saw head can be tilted for accurate bevel cuts up to 45°.

Função deslizante

The sliding function allows for cutting wider workpieces than a standard miter saw. To use, unlock the sliding mechanism (if applicable), pull the saw head forward, lower the blade into the material, and push the saw head smoothly back through the workpiece. Ensure the workpiece is fully supported throughout the cut.

5. Manutenção

Regular maintenance ensures the longevity and safe operation of your miter saw. Always disconnect the saw from the power supply before performing any maintenance.

troca de lâmina

1. Desconecte a alimentação.
2. Levante a proteção da lâmina.
3. Utilize a chave fornecida para soltar a porca do eixo enquanto mantém pressionado o botão de travamento do eixo.
4. Carefully remove the old blade and install the new blade, ensuring the teeth are oriented correctly.
5. Aperte bem a porca do eixo.

Limpeza

• Regularly empty the dust bag or vacuum the dust port.
• Clean the saw's exterior with a damp pano. Não use produtos químicos agressivos.
• Keep the sliding rails clean and free of debris for smooth operation.

Lubrificação

Apply a thin layer of light machine oil to the sliding rails periodically to ensure smooth movement of the saw head.

6. Solução De Problemas

7. Especificações

8. Garantia e Suporte

VONROC products are manufactured to high-quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official VONROC website. For technical support, spare parts, or service inquiries, please contact VONROC customer service through their official channels.

Guarde o comprovante de compra para eventuais solicitações de garantia.