Pipishell Full Motion TV Wall Mount User Manual

Introdução

This manual provides detailed instructions for the safe installation and operation of your Pipishell Full Motion TV Wall Mount. Please read all instructions carefully before beginning installation. If you have any questions, contact customer support.

Imagem: Acimaview of Pipishell Full Motion TV Wall Mounts, models PIMFK3 and PILFK4, showing their articulating arm designs and TV mounting plates.

Informações importantes de segurança

AVISO: A não leitura e o não cumprimento destas instruções podem resultar em ferimentos graves, danos materiais ou anulação da sua garantia.

• Não instale este produto diretamente em drywall. Ele deve ser fixado em uma estrutura sólida de madeira, parede de concreto ou parede de tijolos.
• Certifique-se de que a estrutura da parede suporte com segurança o peso combinado do suporte e da sua televisão.
• Do not exceed the maximum weight capacity specified for each model: 99 lbs (45 kg) for PIMFK3 and 132 lbs (60 kg) for PILFK4.
• Sempre peça ajuda a alguém para levantar e posicionar a televisão.
• Tighten all screws firmly but do not overtighten. Overtightening can damage screws and components.
• Verifique todas as conexões periodicamente para garantir que permaneçam seguras.

Conteúdo da embalagem

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact Pipishell customer service.

Componentes de montagem:

• Conjunto de placa de parede
• Suportes de TV (2x)
• Kit de ferragens para montagem (diversos parafusos, arruelas, espaçadores)
• Nível de bolha
• Abraçadeiras de cabo

Imagem: Detalhada view of the PIMFK3 mount, highlighting the security lock, compression hinges, and strong dual arms. Also shows the maximum weight capacity of 99 lbs and TV size range of 26-55 inches.

Imagem: Detalhada view of the PILFK4 mount, showcasing its six-arm structure, safety lock, extra-wide TV plate, and ultra-strong wall plate for heavy-duty support.

Ferramentas necessárias (não incluídas)

• Lápis
• Localizador de vigas (para instalação de vigas de madeira)
• Furadeira elétrica
• Drill Bits (appropriate size for wall type and lag bolts)
• Chave de soquete ou chave ajustável
• Chave de fenda Phillips
• Fita métrica

Requisitos de instalação

Compatibilidade com TV:

• PIMFK3: Fits most 26-55 inch flat or curved LED, LCD, OLED TVs. Maximum weight capacity: 99 lbs (45 kg).
• PILFK4: Fits most 37-75 inch flat or curved LED, LCD, OLED TVs. Maximum weight capacity: 132 lbs (60 kg).

Compatibilidade VESA:

This mount supports VESA patterns from 100x100mm up to 600x400mm. Measure the horizontal and vertical distance between the mounting holes on the back of your TV to determine its VESA pattern.

Compatibilidade do tipo de parede:

The mount is designed for installation on:

• Single Wood Studs (PIMFK3) or 16-inch Wood Studs (PILFK4)
• Paredes de concreto maciço
• Paredes de tijolos

NÃO fixe apenas em drywall.

Image: Diagram illustrating VESA compatibility (Min 100mm, Max 400mm for PIMFK3) and suitable wall types: single wood stud, concrete wall, and brick wall.

Image: Diagram illustrating VESA compatibility (Max 600x400mm) and suitable wall types for PILFK4: 16-inch wood studs, concrete wall, and brick wall. A warning states: Do not mount on drywall alone.

Configuração e instalação

Step 1: Determine Mounting Location and Wall Type

1. Use a stud finder to locate the center of a wood stud if installing on wood. Mark the stud edges.
2. For concrete or brick walls, ensure the wall is solid and free of obstructions.
3. Hold the wall plate against the wall at your desired height and use a pencil to mark the pilot hole locations. Use the included bubble level to ensure it is level.

Passo 2: Faça furos piloto

• For wood studs: Drill pilot holes using a 7/32 inch (5.5mm) drill bit to a depth of 2.2 inches (55mm).
• For concrete/brick walls: Drill pilot holes using a 3/8 inch (10mm) masonry drill bit to a depth of 2.4 inches (60mm). Insert concrete anchors into the holes, ensuring they are flush with the wall surface.

Etapa 3: anexar a placa de parede à parede

• Alinhe a placa de parede com os furos previamente feitos.
• Secure the wall plate to the wall using the provided lag bolts and washers. Tighten firmly with a socket wrench.

Etapa 4: anexar suportes de TV à TV

1. Coloque a TV com a tela virada para baixo sobre uma superfície macia e limpa.
2. Identify the correct diameter and length of screws for your TV's VESA mounting holes. Use the provided spacers if the TV back is uneven or if screws are too long.
3. Attach the two TV brackets to the back of your TV using the chosen screws and washers. Ensure the brackets are centered and level.

Passo 5: Monte a TV na placa de parede.

• With an assistant, carefully lift the TV and hook the TV brackets onto the wall plate.
• Certifique-se de que a TV esteja firmemente encaixada na placa de parede.
• Engage the safety locks on the bottom of the TV brackets to prevent accidental dislodging.

Operação e ajustes

Your Pipishell Full Motion TV Wall Mount allows for various adjustments to optimize your viewexperiência.

Ajuste de inclinação:

The mount allows for a tilt range of -15° to +5° (PIMFK3) or -15° to +5° (PILFK4). Loosen the tilt adjustment knobs on the TV brackets, adjust the TV to the desired angle, and then re-tighten the knobs to secure the position.

Ajuste giratório:

The articulating arm allows the TV to swivel up to 90° left or right (PIMFK3) or 120° (PILFK4), depending on TV size and wall distance. Gently push or pull the TV to the desired viewângulo de engate.

Ajuste de nível:

After installation, you can adjust the TV's level by ±3°. Loosen the leveling screws on the TV brackets, adjust the TV to be perfectly level, and then re-tighten the screws.

Extensão e retração:

The mount can extend the TV away from the wall up to 19.5 inches (PIMFK3) or 16 inches (PILFK4) and retract it to a minimum distance of 3.2 inches (PIMFK3) or 3.1 inches (PILFK4) from the wall. Gently pull or push the TV to adjust the distance.

Image: Demonstrates the PIMFK3 mount's ability to pull out to 19.5 inches, tilt ±5° for anti-glaring, swivel ±90°, and level ±3° for an optimal viewexperiência.

Image: Illustrates the PILFK4 mount's tilt range from -15° to +5° and level adjustment of ±3° for fine-tuning the TV's position after installation.

Image: Shows the PILFK4 mount's swivel capability of 120° and its ability to retract to 3.1 inches and extend up to 16 inches from the wall, allowing for flexible viewing positions and space saving.

Manutenção

• Periodically check that all screws and connections are secure. Re-tighten if necessary.
• Limpe o suporte com um pano macio e seco. Evite produtos de limpeza abrasivos ou solventes.
• Ensure cables are properly managed and not pinched by moving parts of the mount. Use the provided cable ties to keep cables tidy.

Solução de problemas

A TV não está nivelada após a instalação:

Loosen the level adjustment screws on the TV brackets, adjust the TV to the desired level using a bubble level, and then re-tighten the screws.

O suporte parece solto na parede:

Immediately remove the TV from the mount. Check that all lag bolts securing the wall plate to the wall are fully tightened. If the wall material is damaged, consult a professional for repair before re-mounting.

Dificuldade em ajustar a inclinação ou a rotação:

Ensure that the tilt adjustment knobs are sufficiently loosened before attempting to adjust the tilt. For swivel, ensure no cables are snagged or preventing movement. Do not force adjustments.

Partes faltando:

Refer to the 'Package Contents' section. If any parts are missing, contact Pipishell customer support for assistance.

Especificações

Garantia e Suporte ao Cliente

Pipishell products are manufactured with quality and care. For warranty information or technical assistance, please contact Pipishell customer support through the retailer's platform or the official Pipishell website.

Please have your product model number (PIMFK3 or PILFK4) and purchase date available when contacting support.