Introdução
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Sharp XL-BH250 Limited Edition 5-Disc Bluetooth Speaker System. This micro system offers a versatile audio experience with its 5-CD changer, digital player, AM/FM radio, USB input, and Bluetooth connectivity, all housed in a distinctive Champagne Gold and Carbon Fiber finish.
Please read this manual thoroughly before using the system to ensure proper operation and to maximize your listening enjoyment.
1. Configuração
Follow these steps to set up your new audio system.
1.1 Desembalagem
Retire cuidadosamente todos os componentes da embalagem. Certifique-se de que todos os itens listados abaixo estejam presentes:
- Main Unit (Micro Component System)
- Alto-falante esquerdo
- Alto-falante direito
- Controle remoto
- Antena de circuito AM
- Antena de fio FM
- Cabo de alimentação
- Manual do usuário (este documento)
Guarde a embalagem original para futuras necessidades de transporte ou manutenção.
1.2 Conexão de alto-falante
Connect the speaker wires from the main unit to the corresponding terminals on the back of each speaker. Ensure correct polarity (+ to + and - to -) for optimal sound quality.
The Sharp XL-BH250 system, showing the central unit with its 5-disc changer and control panel, flanked by two carbon fiber finish speakers. The main unit features a display showing "BLUETOOTH" and various control buttons and a volume knob.
1.3 conexão de antena
For AM reception, connect the supplied AM loop antenna to the AM antenna terminals on the rear of the main unit. For FM reception, connect the supplied FM wire antenna to the FM antenna terminal. Extend the FM wire antenna fully for best reception.
1.4 Conexão de Energia
Plug the power cord into the AC inlet on the rear of the main unit, then plug the other end into a standard AC wall outlet (120V AC, 60Hz).
1.5 Inicialização Inicial
Pressione o EM ESPERA button on the front panel or the remote control to turn on the system. The display will illuminate.
2. Instruções de operação
2.1 Ligar/Desligar
Pressione o EM ESPERA button to toggle the system between On and Standby modes. In Standby mode, the system consumes minimal power.
2.2 Seleção da fonte
Pressione o FUNÇÃO button on the front panel or remote control repeatedly to cycle through available input sources: CD, Bluetooth, USB, AM, FM, and AUDIO IN.
Detail of the Sharp XL-BH250's central control panel, highlighting the display, disc indicators, and primary function buttons for source selection and playback.
2.3 Reprodução de CD
- Pressione o FUNÇÃO botão para selecionar a fonte do CD.
- Pressione o ABRIR/FECHAR button (if available, or refer to disc slot) to open the CD tray.
- Place up to five CDs into the disc slots. Ensure the discs are placed correctly with the label side facing up.
- Imprensa REPRODUZIR/PAUSAR (►/‖) para iniciar a reprodução.
- Use o PULAR (◀◀/►►) botões para navegar entre as faixas.
- Imprensa PARAR (■) para parar a reprodução.
The system supports CD-RW, CD-R, WMA, and MP3 playback formats.
2.4 Conectividade Bluetooth
The system allows wireless audio streaming from Bluetooth-enabled devices.
- Pressione o FUNÇÃO button to select the Bluetooth source. The display will show "BLUETOOTH" and begin searching for devices.
- No seu dispositivo Bluetooth (smartphone, tablet, etc.), ative o Bluetooth e procure por dispositivos disponíveis.
- Select "SHARP XL-BH250" from the list of found devices.
- Once paired, the system will confirm the connection, and you can begin streaming audio.
- For devices with NFC, simply tap the device to the NFC touchpoint on the system to initiate pairing.
Reprodução USB 2.5
Conecte um pen drive USB contendo arquivos de áudio MP3 ou WMA. files to the USB port on the front of the main unit. Select the USB source using the FUNÇÃO button. Playback will begin automatically or can be controlled using the playback buttons.
Rádio AM/FM 2.6
- Pressione o FUNÇÃO button to select AM or FM radio.
- Use o AFINAÇÃO buttons (often combined with skip buttons) to manually tune to a station.
- To auto-scan and store presets, refer to the detailed instructions in the full manual (not provided here, but common functionality). The system supports 40 presets.
2.7 Audio In / Headphone Out
- ENTRADA DE ÁUDIO: Connect external audio devices (e.g., turntable with pre-amp, MP3 player) to the AUDIO IN jacks on the front panel using a 3.5mm stereo cable. Select the AUDIO IN source.
- TELEFONES: Connect headphones to the PHONES jack on the front panel for private listening. Speaker output will be muted automatically.
2.8 Controle de volume
Gire o VOLUME botão no painel frontal ou use o VOLUME +/- Botões no controle remoto para ajustar o nível de som.
3. Manutenção
Proper care ensures the longevity and performance of your audio system.
3.1 Limpando a Unidade
Wipe the main unit and speakers with a soft, dry cloth. For stubborn stains, dampen the cloth slightly with water or a mild, non-abrasive cleaner. Do not use strong solvents like alcohol, benzene, or thinner, as they may damage the finish.
3.2 CD Cuidados com as Lentes
Avoid touching the CD lens inside the disc tray. If the lens becomes dirty, use a commercially available CD lens cleaner disc. Do not attempt to clean the lens manually.
3.3 Cuidados com o alto-falante
Keep the speaker grilles free from dust. Do not press on the speaker cones, as this can cause damage.
4. Solução De Problemas
Se você encontrar problemas com seu sistema, consulte os problemas comuns e suas soluções a seguir.
| Problema | Possível causa | Solução |
|---|---|---|
| Sem energia | Cabo de alimentação não está conectado corretamente. | Certifique-se de que o cabo de alimentação esteja firmemente conectado à unidade e à tomada da parede. |
| Sem som | Volume is too low or muted; incorrect source selected; speaker wires disconnected. | Increase volume; select correct input source; check speaker wire connections. |
| Bluetooth não conecta | Device not in pairing mode; system too far from device; interference. | Ensure Bluetooth is enabled on both devices and in pairing mode; move devices closer; restart both devices. |
| CD não reproduz / Erro no disco | Disc is dirty, scratched, or inserted incorrectly; unsupported disc format. | Clean the disc; check for scratches; ensure disc is inserted correctly; verify disc format is supported (CD-R/RW, MP3, WMA). |
| Má recepção de rádio | Antena mal conectada ou mal posicionada. | Adjust the position of the AM loop and FM wire antennas; ensure they are fully extended. Consider an external antenna for improved reception. |
If the problem persists after trying these solutions, please contact Sharp customer support.
5. Especificações
Key technical specifications for the Sharp XL-BH250 Micro Component System.
- Número do modelo: XL-BH250(GL)
- Dimensões do produto (L x P x A): 6.9 x 12.4 x 9.5 polegadas (Unidade principal)
- Peso do item: 15.73 libras
- Tecnologia de conectividade: Bluetooth, USB, NFC
- Tipo de alto-falante: Estéreo
- Trocador de CD: 5 discos
- Supported Playback Formats: CD-RW, CD-R, WMA, MP3
- Sintonizador: AM/FM digital com 40 predefinições
- Entradas: Audio Line-in, USB
- Saídas: Fones de ouvido
6. Garantia e Suporte
Sharp products are designed for reliability and performance. This product is covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharp website.
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Sharp customer support. Contact information can typically be found on the Sharp website ou na embalagem do produto.
Você também pode visitar o Loja Sharp na Amazon Para obter informações adicionais sobre o produto e recursos de suporte.
