ILM WS206 Modular Motorcycle Helmet User Manual

1. Informações importantes de segurança

Your ILM WS206 helmet is designed to provide protection during motorcycle riding. Adherence to safety guidelines is crucial for your well-being.

• DOT Safety Standard: This helmet meets the DOT safety standard, indicating it has passed rigorous testing for impact protection.
• Ajuste adequado: Always ensure the helmet fits snugly and securely on your head. An improperly fitted helmet may not provide adequate protection.
• Cinta de queixo: Always fasten the quick-release chin strap securely before riding. The helmet must remain firmly on your head in the event of an impact.
• Utilização da viseira: Use the appropriate visor for current riding conditions. The clear outer visor is for general use, while the inner sun visor helps reduce glare in bright conditions.
• Helmet Condition: Inspect your helmet regularly for any signs of damage, such as cracks in the shell, damaged visors, or worn padding. Do not use a damaged helmet.
• Impacto: A helmet that has sustained an impact, even if it appears undamaged, should be replaced immediately. The protective properties may be compromised.
• Produtos químicos: Avoid exposing the helmet to petroleum products, cleaning agents, paints, or adhesives, as these can damage the helmet materials and compromise its protective capabilities.

2. Produto acabadoview

The ILM WS206 is a modular full-face motorcycle helmet featuring a dual visor system and a flip-up design for enhanced convenience and versatility.

Principais características

• Modular Flip-Up Design: Allows the chin bar and outer visor to be raised, converting the helmet from full-face to open-face mode for convenience.
• Dual Visor System: Includes an outer clear visor and an inner retractable sun visor for adaptable vision in varying light conditions.
• Sistema de ventilação: Equipped with upper and lower vents to improve airflow, reduce fogging, and enhance rider comfort.
• Quick Release Buckle: Provides easy and secure fastening and unfastening of the chin strap.
• Removable and Washable Liners: Interior padding can be removed for cleaning, ensuring hygiene and comfort.
• Communication System Pockets: Integrated speaker pockets facilitate the installation of communication devices.
• Eyewear Compatible Design: Designed to accommodate riders who wear glasses, providing a more comfortable fit.

Figure 2.1: The ILM WS206 modular helmet in gloss black, shown with the chin bar and outer visor in the open position.

Figure 2.2: Illustration of the helmet's modular design, demonstrating both full-face and open-face configurations with the inner sun visor.

Figure 2.3: Detail of the helmet's humanized design, highlighting the communication system speaker pocket and eyewear compatibility.

Figure 2.4: Internal components of the helmet, including the removable inner lining, quick buckle, chin guard, and neck brace.

3. Configuração e dimensionamento

Guia de dimensionamento

To ensure optimal protection and comfort, it is essential to select the correct helmet size. Measure your head circumference accurately before consulting the size chart.

As informações de tamanho são fornecidas pelo fabricante e não garantem um ajuste perfeito. Use esta tabela apenas como um guia.

Figure 3.1: ILM Motorcycle Helmet Size Chart.

First Use and Proper Fit

1. Meça a circunferência da sua cabeça: Use a flexible tape measure to find the circumference of your head, placing it about 1 inch (2.5 cm) above your eyebrows and ears.
2. Selecione o tamanho: Refer to the size chart to find the corresponding helmet size. If your measurement falls between two sizes, try the smaller size first for a snug fit.
3. Experimente o capacete: Place the helmet on your head. It should feel snug around your cheeks and the top of your head without causing uncomfortable pressure points.
4. Verifique se há movimento: With the chin strap unfastened, try to rotate the helmet from side to side and front to back. If it moves freely, it is too large.
5. Aperte a cinta de queixo: Secure the quick-release buckle. The strap should be tight enough that you cannot pull the helmet off your head by rolling it forward or backward. It should not choke you.
6. Visibilidade: Ensure your vision is unobstructed and that the visor operates smoothly.

4. Instruções de operação

Dual Visor Operation

The ILM WS206 helmet features two visors for different light conditions:

• Outer Clear Visor: This main visor provides a wide field of vision and protects against wind, debris, and insects. It can be raised or lowered manually.
• Inner Sun Visor: This tinted visor is designed to reduce glare from direct sunlight. It can be deployed or retracted using the slider mechanism located on the side of the helmet. Use the sun visor only in bright conditions and retract it in low light or at night.

Figure 4.1: Visor options for different weather conditions.

Modular Flip-Up Function

To raise the chin bar and outer visor:

1. Locate the release button or lever, typically found at the center front of the chin bar.
2. Press the button and lift the chin bar upwards until it locks into the open position.

To lower the chin bar and outer visor:

1. Press the release button again (if required by design) or simply pull the chin bar down.
2. Ensure it clicks securely into the closed, full-face position before riding.

Sistema de Ventilação

The helmet features multiple vents to manage airflow:

• Ventilação Superior: Located on the top of the helmet, this vent can be opened or closed to allow air intake and improve overall circulation.
• Ventilação inferior: Positioned on the chin bar, this vent helps direct airflow across the inner surface of the visor, reducing fogging and providing fresh air to the rider's face.

Adjust the vents as needed for comfort and to prevent visor fogging.

Figure 4.2: Ventilation system airflow diagram.

Figure 4.3: Multi-vent system detail.

Fivela de liberação rápida

To fasten the chin strap:

1. Insira a extremidade macho da fivela no encaixe fêmea até ouvir um clique que a trave com segurança.
2. Adjust the strap length for a snug fit under your chin.

To unfasten the chin strap:

1. Press the red release tab on the buckle.
2. Pull the male end out of the receiver.

Figure 4.4: Quick release buckle mechanism.

5. Manutenção e Cuidados

Proper maintenance extends the life of your helmet and ensures its protective capabilities.

Limpeza da carcaça do capacete

• Use um pano macioampencerado com água e sabão neutro.
• Avoid abrasive cleaners, solvents, or petroleum-based products, as these can damage the shell's finish and material integrity.
• Rinse thoroughly with clean water and dry with a soft, clean cloth.

Cuidados com a viseira

• Clean visors with a soft cloth and mild soap and water.
• Do not use harsh chemicals or abrasive materials, which can scratch or damage the visor's coating.
• For stubborn dirt or insects, soak a soft cloth in warm water and place it over the visor for a few minutes to loosen debris before gently wiping clean.

Removable Lining Care

The inner lining and cheek pads are removable and washable:

1. Carefully remove the inner lining components from the helmet.
2. Hand wash using mild soap and cool water.
3. Rinse thoroughly and allow to air dry completely before reinstalling them into the helmet. Do not machine wash or tumble dry.

Figure 5.1: Removable and washable inner lining.

Armazenar

• Guarde seu capacete em local fresco e seco, longe da luz solar direta e de temperaturas extremas.
• Avoid storing it near chemicals or solvents.

6. Solução De Problemas

This section addresses common issues you might encounter with your ILM WS206 helmet.

• Embaçamento da viseira: Ensure the lower chin vent is open to direct airflow across the visor. In cold or humid conditions, consider using an anti-fog treatment or a Pinlock-ready visor (if available and purchased separately).
• O capacete está muito apertado/folgado: Re-check your head measurement against the size chart. If the helmet is too tight, it may cause discomfort; if too loose, it compromises safety. Ensure the chin strap is properly adjusted.
• A barra de queixo não está travando corretamente: Ensure the chin bar is fully lowered and pushed firmly until it clicks into place. Inspect the latching mechanism for any obstructions or damage.
• Difficulty Operating Visors: Check for any dirt or debris in the visor mechanism. Clean the tracks and pivot points. If a visor is scratched or damaged, it should be replaced.
• Ruído excessivo do vento: Ensure all vents are closed if you wish to minimize wind noise. A proper fit is also crucial for reducing noise.

7. Especificações

Detailed specifications for the ILM WS206 Modular Motorcycle Helmet:

• Nome do modelo: WS206
• Marca: ILM
• Classificação de segurança: Certificado DOT
• Tipo de concha: Hard (ABC shell)
• Material do revestimento: Poliestireno Expandido (EPS)
• Tipo de fechamento: Fivela de liberação rápida
• Número de aberturas de ventilação: 6
• Tipo de acabamento: Glossy (for Gloss Black variant)
• Peso do item: Aproximadamente 4.99 libras (2.27 quilogramas)
• Dimensões da embalagem: 16 x 11.2 x 11 polegadas
• Material: Thermoplastic, Expanded Polystyrene (EPS), and other materials
• Tipo de serviço do veículo: Motocicleta
• Características especiais: Dual Visor, Flip-up Modular Design, Communication System Pockets, Eyewear Compatible

8. Garantia e Suporte

ILM stands behind the quality of its products. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your purchase or visit the official ILM website.

If you encounter any issues or have questions regarding your ILM WS206 helmet, please contact ILM customer support through their official channels. When contacting support, please have your helmet model (WS206) and purchase information readily available.

Para mais informações, visite o ILM Store on Amazon.