1. Introdução
This manual provides comprehensive instructions for the safe and effective use of your Dasqua 1804-1055 2-in-1 Laser Tape Measure. This device combines a traditional 5-meter tape measure with a 30-meter laser distance meter, featuring an OLED display for clear readings and USB charging capability. Please read this manual thoroughly before operating the device and retain it for future reference.
2. Informações de segurança
AVISO: This product contains a Class 2 laser. Improper use can result in hazardous radiation exposure. Always adhere to the following safety guidelines:
- Não olhe diretamente para o feixe de laser.
- Não aponte o raio laser para pessoas ou animais.
- Avoid pointing the laser beam at reflective surfaces, as reflected beams can also be hazardous.
- Do not disassemble or modify the device. Unauthorized modifications can lead to laser radiation exposure.
- Mantenha o dispositivo fora do alcance de crianças.
- Utilize somente conforme descrito neste manual.
- Do not operate the device in explosive atmospheres or near flammable liquids or gases.
3. Produto acabadoview
3.1 Componentes e Controles
Familiarize yourself with the main components and control buttons of your Dasqua 2-in-1 Laser Tape Measure.
Image: Diagram showing the Dasqua 1804-1055 device with labels for the OLED display, laser emission point, USB charging port, tape measure, lock button, and control buttons.
- Display OLED: Shows measurements, battery status, and operating modes.
- Fita métrica: Traditional retractable steel tape for short-distance measurements (5m).
- Laser Emission Point: Where the laser beam exits the device.
- Porta de carregamento USB: Para recarregar a bateria interna.
- Botão de bloqueio: Secures the tape measure in position.
3.2 botões de controle
Imagem: Close-up view of the control panel on the Dasqua 1804-1055, showing the FUNC/UNITS, +/-, DIST, and CLEAR/OFF buttons.
- FUNC/UNITS: Press to cycle through measurement functions (e.g., single, continuous) or to change measurement units (meters, feet, inches).
- +/-: Used for adding or subtracting measurements. Also used to set the measurement reference point (front or rear of the device).
- DIST: Activates the laser for measurement. Press once to turn on the laser, press again to take a measurement.
- CLEAR/OFF: Press once to clear the current measurement. Press and hold to power off the device.
4. Configuração
4.1 Carregando o dispositivo
The Dasqua 1804-1055 is equipped with a built-in Li-ion 3.7V rechargeable battery. Before first use, ensure the device is fully charged.
Imagem: Lado view of the Dasqua 1804-1055 showing the micro-USB charging port.
- Localize a porta de carregamento USB na lateral do dispositivo.
- Connect the provided USB cable to the device and to a standard USB power adapter (not included) or a computer USB port.
- The OLED display will indicate charging status.
- Após a carga completa, desconecte o cabo USB.
Uma carga completa permite aproximadamente 2000 medições.
4.2 Ligar/Desligar
- Para ligar: Pressione o DIST botão ou o LIMPAR botão.
- Para desligar: Pressione e segure o LIMPAR button for a few seconds. The device will also automatically power off after 90 seconds of inactivity to conserve battery. The laser itself turns off after 30 seconds of inactivity.
5. Instruções de operação
5.1 Utilizando a fita métrica
The integrated 5-meter tape measure functions like a standard tape measure.
Imagem: Close-up view of the 2.5cm wide tape measure extending from the Dasqua 1804-1055 device, showing metric markings.
- Pull the tape blade out to the desired length.
- To lock the tape in place, slide the lock button forward.
- To retract the tape, slide the lock button backward and gently guide the tape back into the housing.
5.2 Using the Laser Measure
The laser measure provides quick and accurate digital distance measurements up to 30 meters.
Image: The Dasqua 1804-1055 device with a visible red laser beam extending from its front, indicating active laser measurement.
Medição de distância única
- Ligue o dispositivo.
- Point the laser emission point towards the target.
- Pressione o DIST button once to activate the laser. A red laser dot will appear on the target.
- Pressione o DIST button again to take the measurement. The distance will be displayed on the OLED screen.
Medição Contínua (Rastreamento)
- Ligue o dispositivo.
- Pressione o FUNC/UNITS button until the continuous measurement icon (often a moving line or similar) appears on the display.
- Pressione o DIST button once to start continuous measurement. The display will update in real-time as you move the device.
- Pressione o DIST Pressione novamente o botão para interromper a medição contínua e salvar a última leitura.
Mudança de unidades de medida
To switch between meters (m), feet (ft), and inches (in):
- Pressione o FUNC/UNITS Pressione repetidamente o botão até que a unidade desejada seja exibida.
Configurando o ponto de referência de medição
The device can measure from its front edge or its rear edge. This is typically indicated by an icon on the display.
- Pressione o +/- button to toggle between front-edge and rear-edge measurement reference.
Addition and Subtraction of Measurements
The device supports basic arithmetic operations for measurements.
- Take the first measurement using the DIST botão.
- Pressione o +/- button once for addition (+) or twice for subtraction (-). The corresponding symbol will appear on the display.
- Take the second measurement. The result of the operation will be displayed.
- To clear the calculation, press LIMPAR.
6. Manutenção
- Limpeza: Use um pano macio e macioamp cloth to clean the device. Do not use abrasive cleaners, solvents, or immerse the device in water.
- Armazenar: Guarde o dispositivo em local fresco e seco, longe da luz solar direta e de temperaturas extremas.
- Bateria: Recarregue a bateria regularmente, mesmo que o dispositivo não seja usado com frequência, para manter a saúde da bateria.
- Lente a laser: Keep the laser emission and reception lenses clean for accurate measurements. Use a soft cloth, similar to cleaning camera lenses.
7. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| O dispositivo não liga. | Bateria fraca. | Carregue o dispositivo usando o cabo USB. |
| Medições a laser imprecisas. | Dirty laser lens; unstable measurement surface; incorrect reference point. | Clean the laser lens; ensure a stable measurement; verify reference point setting. |
| Laser does not activate. | Device in incorrect mode; low battery. | Ensure device is powered on and not in a non-laser mode; charge battery. |
| OLED display is dim or blank. | Low battery; device powered off. | Charge the device; power on the device. |
8. Especificações
Detailed technical specifications for the Dasqua 1804-1055 2-in-1 Laser Tape Measure.
Image: Detailed diagram of the Dasqua 1804-1055 with a list of technical specifications including measurement range, accuracy, laser class, operating conditions, and battery life.
| Recurso | Especificação |
|---|---|
| Faixa de medição a laser | 0.05 a 30 metros |
| Comprimento da fita métrica | 5 metros |
| Medindo a precisão | +/- 3 mm |
| Aula de Laser | Classe 2 |
| Tipo de laser | 620-690nm, <1mW |
| Temperatura de operação | 0°C - 40°C (32°F - 104°F) |
| Temperatura de armazenamento | -20°C - 70°C (-4°F - 158°F) |
| Tipo de exibição | OLED, Multi-line (2 lines), White on Black |
| Tipo de Bateria | Li-íon 3.7V |
| Duração da bateria | Aproximadamente. 2000 medições |
| Laser Auto-Off | 30 segundos |
| Desligamento automático de energia | 90 segundos |
| Largura da fita | 2.5 centímetros |
| Carregando | Capacidade de carregamento USB |
| Dimensões do produto | 6 x 5 x 3 polegadas (aproximadamente) |
| Peso do item | 2 libras (aproximadamente) |
9. Garantia e Suporte
Dasqua products are manufactured under strict quality control. This product is inspected and approved for sale by Dasqua quality control centers.
Image: The Dasqua 1804-1055 device alongside a "Warranty Letter" and an instruction manual, indicating product quality assurance.
Dasqua takes responsibility for the quality of the product, providing a 1-year warranty against defects. Parts found to be defective may be repaired or replaced at Dasqua's sole discretion. This warranty does not apply to any product which has been subject to misuse, abuse, improper application, or which has been altered or repaired by unauthorized personnel.
For warranty claims or technical support, please contact your authorized Dasqua dealer or visit the official Dasqua website para informações de contato.
