BRONC Staves Wireless Tattoo Machine User Manual

1. Introdução

This manual provides essential information for the safe and effective use of your BRONC Staves Wireless Rotary Tattoo Machine. Designed with advanced technology and a Swiss motor, this pen offers powerful and stable performance. Please read these instructions carefully before operating the device.

The BRONC Staves Wireless Tattoo Machine features a lightweight design, an 1800mAh battery for extended operation, and a Type-C fast charging port. It incorporates an OLED display for clear information and includes safety features such as overload and overcurrent protection.

Figura 1: Overview of the BRONC Staves Wireless Tattoo Machine.

2. Informações de segurança

Always prioritize safety and hygiene when using tattoo equipment. This device is intended for professional use only. Improper use can lead to injury or damage to the machine.

• Ensure the machine is clean and sterilized according to industry standards before each use.
• Não utilize a máquina se ela apresentar danos ou mau funcionamento.
• Keep the machine away from water and excessive moisture. The device has a water-resistant rating, but it is not waterproof.
• Use only compatible needle cartridges.
• A máquina apresenta overload and overcurrent protection, which automatically powers off the device during a malfunction.
• A 0.2-second 9V jump start feature is included for reliable startup.

3. Produto acabadoview

The BRONC Staves machine is constructed from aircraft-grade aluminum, providing durability and a lightweight feel. It is available in multiple colors.

Figure 2: The machine supports both wireless and wired operation via an RCA converter.

Figure 3: The body is crafted from aviation-grade aluminum alloy for durability.

Figure 4: The machine is equipped with a powerful Swiss motor.

Figure 5: The BRONC Staves machine is available in multiple color options.

4. Configuração

4.1 Carregando o dispositivo

Before initial use, fully charge the machine. The integrated 1800mAh battery provides approximately 4-7 hours of working time. Charging takes 2-2.5 hours using the provided Type-C fast charge cord.

• Connect the Type-C cable to the charging port on the machine.
• Conecte a outra extremidade do cabo a um adaptador de energia USB compatível (não incluído).
• The OLED display will indicate charging status.

Figure 6: Charging the BRONC Staves machine via Type-C port.

4.2 Installing and Adjusting Needle Cartridges

The BRONC Staves machine is compatible with most standard integrated needle cartridges (suitable for over 90% of tattoo pens on the market).

1. Insert the desired needle cartridge into the machine's rotary needle output.
2. Twist the grip to adjust the needle depth. The adjustable range is 0-4mm.
3. The machine has a fixed stroke length of 3.5mm.

Figure 7: Adjusting needle depth and noting the fixed stroke length.

Figure 8: The rotary needle output is designed for simple and convenient cartridge installation.

Figura 9: Um example of a compatible integrated needle cartridge.

4.3 RCA Converter (Wired Mode)

The machine includes an RCA converter for seamless transitions between independent wireless operation and traditional wired power supply use. To use wired mode, attach the RCA converter to the machine and connect it to an external power supply (not included).

5. Instruções de operação

5.1 Ligar/Desligar

Press and hold the power button (typically located on the OLED display panel) to turn the machine on or off.

5.2 Ajustando o Volumetage

The machine offers a voltage output range of 5.0V-12.0V, with a recommended working voltage of 5.5V-7.5V for optimal performance. Voltage can be adjusted in 0.1V increments.

• Use the '+' and '-' buttons on the OLED display to increase or decrease the voltage.
• O volume atualtage setting is displayed on the OLED screen.

Figure 10: The OLED display provides clear information on battery status and voltage.

Figure 11: The three-button design allows for easy operation.

5.3 Jump Start Feature

The machine includes a 0.2-second 9V jump start feature to assist with starting larger needle configurations or when a quick power boost is needed.

6. Manutenção

6.1 Limpeza e Esterilização

Proper cleaning and sterilization are crucial for hygiene and machine longevity.

• Desligue sempre a máquina da tomada antes de limpá-la.
• Wipe down the exterior of the machine with a suitable disinfectant wipe or spray.
• Não mergulhe a máquina em líquidos.
• Ensure all components are dry before reassembly or storage.

6.2 Cuidados com a bateria

• Para prolongar a vida útil da bateria, evite descarregá-la completamente com frequência.
• Guarde a máquina em local fresco e seco quando não estiver em uso.
• Charge the battery periodically if the machine is stored for extended periods.

7. Solução De Problemas

If you encounter issues with your BRONC Staves Wireless Tattoo Machine, refer to the following common troubleshooting steps:

• A máquina não liga: Ensure the battery is sufficiently charged. Connect the Type-C charger and attempt to power on.
• Inconsistent Power/Stuttering: Check the battery level. If using wired mode, ensure the RCA connection is secure and the external power supply is functioning correctly.
• Needle Not Moving Correctly: Verify that the needle cartridge is properly installed and not damaged. Check for any obstructions in the needle output mechanism.
• Desligamento automático: A máquina está equipada com overload and overcurrent protection. If it shuts down unexpectedly, this may indicate an internal issue or excessive load. Disconnect the machine, allow it to cool, and then attempt to restart. If the issue persists, contact customer support.
• OLED Display Not Responding: Ensure the machine is powered on. If the display remains unresponsive, try charging the device.

8. Especificações

9. Vídeo do produto

10. Garantia e Suporte

The product is subject to a Política de devolução de 30 dias. For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact BRONC customer support through your purchase platform or the official BRONC website.