Quad Lock Waterproof 12V to USB Smart Adaptor Instruction Manual

Produto acimaview

The Quad Lock Waterproof 12V to USB Smart Adaptor is designed to provide a reliable power source for your Quad Lock Weatherproof Wireless Charging Head (not included) from various 12V-24V systems, such as those found in motorcycles, boats, and caravans.

This smart adaptor features multiple switching states for versatile use and includes built-in safety features like reverse polarity protection and an in-line fuse.

Principais características:

Connects to SAE connector or battery terminal.
Multiple switching states (On, Off, Auto) to prevent battery drain.
In-line fuse and reverse polarity protection for enhanced safety.
IP66 Waterproof rated, suitable for wet conditions.
Includes 1.5m USB-A female port, 10cm SAE cable, 1m SAE to ring terminal cable with in-line fuse, USB-A sealing boot, and 5 x Zip Ties.

Quad Lock Waterproof 12V to USB Smart Adaptor with cables

Image: The Quad Lock Waterproof 12V to USB Smart Adaptor, showing the main unit and connected cables.

Conteúdo da embalagem

1 x Quad Lock Waterproof 12V to USB Smart Adaptor (QLA-PBX)
1 x 1.5m USB-A female port cable (hard-wired)
1 x 10cm SAE cable (hard-wired)
1 x 1m SAE to ring terminal cable with in-line fuse
1 x USB-A sealing boot
5 x Zip Gravatas

Configuração e instalação

Follow these steps to properly install your Quad Lock Waterproof 12V to USB Smart Adaptor:

Segurança em primeiro lugar: Before beginning installation, ensure the vehicle's ignition is off and the battery is disconnected to prevent electrical shorts or damage.
Conecte à fonte de alimentação:
- If connecting to a battery, use the provided 1m SAE to ring terminal cable. Connect the ring terminals to the positive (+) and negative (-) battery posts. Ensure correct polarity (red to positive, black to negative). The in-line fuse provides protection.
- If connecting to an existing SAE connector, simply plug the 10cm SAE cable from the Smart Adaptor into it.
Image: The Smart Adaptor connected to a motorcycle battery using the ring terminal cable.
Mount the Adaptor: Secure the Smart Adaptor unit in a suitable, protected location using the provided zip ties. Ensure it is away from moving parts, excessive heat, and direct water spray, although it is IP66 rated.
Image: The Smart Adaptor secured to a motorcycle frame using zip ties.
Connect Charging Head: Plug your Quad Lock Weatherproof Wireless Charging Head (or other USB-A powered device) into the USB-A female port of the Smart Adaptor. Use the provided USB-A sealing boot to protect the connection from water and dust.
Reconecte a bateria: Once all connections are secure and the adaptor is mounted, reconnect your vehicle's battery.

Instruções de operação

The Smart Adaptor features a toggle switch with three positions: ON, OFF, and AUTO. Understand each mode for optimal use:

Posição do interruptor	Função	Aplicativo
ON	Ligar	Provides constant power when connected to a 12V - 24V supply. Ideal for boats, caravans, or applications where continuous power is desired regardless of engine status.
DESLIGADO	Desligar	Completely cuts power to the connected device. Use this mode when the device is not needed or for long-term storage to prevent any potential battery drain.
AUTO	Power ON (Conditional)	Keeps the device off until the input voltage rises above 13.5V (indicating the engine is running and charging the battery) and turns off when the input voltage drops below 12.5V. Perfect for motorcycles, ATVs, and other automotive applications to avoid battery drain when the engine is off.

Close-up of the Quad Lock Smart Adaptor switch with ON, OFF, and AUTO positions

Imagem: Close-up view of the Smart Adaptor's switch, showing the 'ON', 'OFF', and 'AUTO' settings.

Manutenção

To ensure the longevity and optimal performance of your Quad Lock Waterproof 12V to USB Smart Adaptor, follow these maintenance guidelines:

Inspeção regular: Periodically check all cable connections for tightness and signs of wear or corrosion. Ensure the USB-A sealing boot is properly seated to maintain water resistance.
Limpeza: Wipe the adaptor and cables with a damp pano para remover sujeira e detritos. Evite usar produtos químicos agressivos ou produtos de limpeza abrasivos.
Verificação de fusíveis: In the rare event of a power issue, check the in-line 3A fast blow fuse. If blown, replace it with a fuse of the same rating.
Armazenar: If storing the vehicle or device for an extended period, switch the adaptor to the OFF position to prevent any minimal parasitic battery drain.

Solução de problemas

If you encounter issues with your Smart Adaptor, refer to the following common problems and solutions:

Sem energia no dispositivo:
- Ensure the Smart Adaptor switch is in the 'ON' or 'AUTO' position.
- Check all cable connections to the battery or SAE connector for secure contact.
- Verifique se a bateria do veículo tem carga suficiente.
- Inspect the in-line fuse for continuity. Replace if blown.
- If in 'AUTO' mode, ensure the engine is running and the voltage está acima de 13.5 V.
Device Not Charging Optimally:
- Ensure the connected charging head or device is functioning correctly.
- Check the USB-A cable connecting the charging head to the adaptor for damage.
Adaptor Feels Warm:
- It is normal for the adaptor to feel slightly warm during operation. If it becomes excessively hot, disconnect it immediately and contact support.

If the problem persists after attempting these solutions, please contact Quad Lock customer support for further assistance.

Especificações

Atributo	Valor
Marca	Quad Lock
Modelo	QLA-PBX
Peso do item	6.7 onças
Dimensões da embalagem	6.93 x 2.6 x 1.93 polegadas
Classificação à prova d'água	IP66
Vol de entradatage	12 V - 24 V
Avaliação de fuzível	3A (in-line fast blow)
Porta de Saída	USB-A female

Garantia e Suporte

Quad Lock products are designed for durability and performance. For information regarding warranty coverage, product registration, or technical support, please visit the official Quad Lock website ou entre em contato diretamente com o atendimento ao cliente.

Recursos on-line:

Oficial Website: www.quadlockcase.com
Support Page: Refer to the webAcesse o site para obter informações de contato e perguntas frequentes.

Always ensure you are using genuine Quad Lock accessories for optimal performance and safety.

	Quad Lock Waterproof 12V to USB Smart Adaptor - Installation and Usage Instructions Comprehensive guide to installing and operating the Quad Lock Waterproof 12V to USB Smart Adaptor. Covers wiring options, connection to 12-24V DC power sources, switching modes (ON, OFF, AUTO), and attachment to motorbike frames. Includes output specifications and application details.
	Instruções do carregador sem fio à prova de intempéries Quad Lock Instruções completas para conectar, conectar e usar o carregador sem fio à prova de intempéries Quad Lock, incluindo indicadores de status de LED e práticas recomendadas para gerenciamento de cabos.
	Quad Lock 12V-24V Waterproof Wireless Charger (QL-5764) Installation and Compliance Guide A comprehensive guide detailing the installation, wiring, and regulatory compliance for the Quad Lock 12V-24V Waterproof Wireless Charger, model QL-5764. Includes steps for phone attachment/detachment, what's in the box, wiring diagrams, LED status indicators, and essential compliance information for CE, UKCA, FCC, and IC.
	Guia de Instalação do Adaptador Quad Lock Urban Stem Guia de instalação conciso e otimizado para SEO do adaptador de mesa Quad Lock Urban, detalhando compatibilidade, especificações de torque e avisos de segurança essenciais para ciclistas.
	Quad Lock Base Flexible Adhesive Installation Instructions Step-by-step guide for installing the Quad Lock Base Flexible Adhesive, including cleaning, application, and usage recommendations for optimal bond strength.
	Quad Lock Bar Clamp Medium Installation Instructions Step-by-step instructions for installing the Quad Lock Bar Clamp Medium, including spacer selection and tightening specifications.

Quad Lock QLA-PBX