Airbition A1

Airbition 8-inch Wall Mount Fan with Remote Control (Model A1) User Manual

Comprehensive instructions for safe and efficient use of your Airbition Wall Mount Fan.

1. Instruções importantes de segurança

Please read and understand all safety instructions before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.

2. Conteúdo da embalagem

Verifique se todos os itens estão presentes na embalagem:

Airbition 8-inch Wall Mount Fan with Remote Control

Image: The Airbition 8-inch Wall Mount Fan, showing the fan unit and its remote control.

3. Configuração e instalação

3.1 Montagem na parede

The Airbition A1 fan is designed for wall mounting to optimize space and airflow. Ensure the mounting surface is sturdy and capable of supporting the fan's weight.

  1. Selecione o local: Choose a suitable location on a wall, ensuring it is within reach of a power outlet and allows for optimal air circulation. Consider the 70-inch power cord length.
  2. Marque os pontos de perfuração: Use the provided mounting bracket as a template to mark the positions for drilling holes on the wall.
  3. Furos de perfuração: Drill holes at the marked positions. Use appropriate drill bits and wall anchors if necessary, depending on your wall material.
  4. Suporte Seguro: Attach the mounting bracket to the wall using screws (not included, typically provided with wall anchors). Ensure it is firmly secured.
  5. Anexar ventilador: Align the fan unit with the secured mounting bracket and slide it into place until it clicks or is firmly seated.

3.2 Conexão de Energia

Once the fan is securely mounted, connect the power cord.

  1. Insert the USB-C connector of the power cord into the back of the fan unit.
  2. Plug the standard electrical plug into a 120V AC power outlet.
Diagram showing fan oscillation and vertical tilt

Image: Diagram illustrating the 90° oscillation and 120° vertical tilt capabilities of the fan, demonstrating efficient air circulation in a room.

4. Instruções de operação

The Airbition A1 fan can be operated using the control panel on the unit or the included remote control.

4.1 Painel de controle

The control panel is located on the base of the fan unit. It typically includes buttons for Power, Speed, Oscillation, and Timer.

4.2 Controle Remoto

The remote control allows convenient operation from a distance of up to 20 feet. Ensure the CR2032 battery is correctly installed and the battery cover is fully tightened for proper function.

Airbition fan remote control

Image: The remote control for the Airbition fan, showing its buttons for various functions.

The remote control is magnetic for convenient storage, for example, on a refrigerator or the fan itself.

4.3 Inclinação ajustável

The fan head can be manually adjusted up to 120° vertically to direct airflow precisely where needed. Gently tilt the fan head to the desired angle.

Woman using remote control to operate wall-mounted fan from a couch

Image: A woman comfortably operating the wall-mounted fan with a remote control from her couch, highlighting the convenience of remote operation.

5. Manutenção

A limpeza regular garante o desempenho ideal e prolonga a vida útil do seu ventilador.

5.1 Limpando o Ventilador

  1. Desconecte: Desligue sempre o ventilador da tomada antes de limpá-lo.
  2. Remover grade: The front grille and fan blades are detachable for easy cleaning. Carefully remove the front grille by twisting or unlatching it according to the design.
  3. Lâminas Limpas: Gently remove the fan blades. Wash the blades and grille with mild soap and water. Ensure they are completely dry before reassembling.
  4. Limpe o exterior: Use um pano macio e macioamp Use um pano para limpar as superfícies externas do ventilador. Não utilize produtos de limpeza abrasivos ou solventes.
  5. Remontar: Once all parts are dry, carefully reassemble the fan blades and front grille. Ensure all components are securely in place before plugging the fan back in.
Hands washing fan blades under running water

Image: Hands washing the detachable fan blades under running water, demonstrating the ease of cleaning.

6. Solução De Problemas

If you encounter issues with your Airbition A1 fan, refer to the following troubleshooting guide:

ProblemaPossível causaSolução
O ventilador não liga.
  • Não conectado.
  • Mau funcionamento da tomada elétrica.
  • Danos no cabo de alimentação.
  • Certifique-se de que o cabo de alimentação esteja conectado firmemente a uma tomada de 120 V.
  • Teste a tomada com outro aparelho.
  • Inspect the power cord for visible damage. If damaged, discontinue use and contact support.
O controle remoto não funciona.
  • Bateria descarregada ou instalada incorretamente.
  • Battery cover not fully tightened.
  • Obstrução entre o controle remoto e o ventilador.
  • Controle remoto fora de alcance.
  • Replace the CR2032 battery. Ensure it is installed with correct polarity.
  • Tighten the battery cover completely.
  • Ensure a clear line of sight between the remote and the fan's receiver.
  • Operate the remote within the 20ft range.
O ventilador está fazendo um barulho incomum.
  • Peças soltas.
  • Poeira ou detritos nas lâminas.
  • Unplug the fan and check if the grille or blades are securely attached.
  • Limpe as pás do ventilador e a grade conforme as instruções de manutenção.
A oscilação não está funcionando.
  • Oscillation feature deactivated.
  • Obstrução mecânica.
  • Pressione o botão de oscilação no painel de controle ou no controle remoto.
  • Ensure nothing is blocking the fan's movement.

7. Especificações

RecursoDetalhe
MarcaAirbition
Nome do modeloA1
CorBranco
Projeto de ventilador elétricoVentilador de parede
Fonte de energiaElétrico com fio
Dimensões do produto11.4"P x 8.26"L x 10.3"A
Tipo de quartoBedroom, Office, RV, Garage, Basement
Características especiaisAdjustable Tilt (120°), Oscillating (90°), Timer
Usos recomendadosResfriamento
Nível de ruído35-55 dB (DC motor)
O quetage264 watts
Número de lâminas7
Volumetage120V
Tipo de interruptorBotão de pressão
Componentes incluídosCabo, Controle Remoto
Uso interno/externoInterior
Método de controleRemoto
Número de níveis de potência4
Tipo de conector de alimentação principalStandard Electrical Plug
Tipo de motorDC
Tipo de instalaçãoMontagem na parede
Peso do item2.25 libras
Bateria para remoto1 bateria CR2032 necessária
Airbition wall mount fan with 70-inch power cord

Image: The Airbition wall mount fan installed on a wall, illustrating the 70-inch power cord length reaching a wall outlet.

8. Garantia e Suporte

For warranty information or technical support, please contact Airbition customer service. Keep your purchase receipt as proof of purchase.

Contact information can typically be found on the product packaging or the official Airbition website.

Documentos relacionados - A1

Préview Manual do usuário do ventilador de montagem em parede Airbition AIR301
Manual do usuário completo para o ventilador de parede Airbition AIR301, abrangendo especificações, instalação, operação, limpeza, solução de problemas e informações sobre a garantia.
Préview Instalação e especificações da placa longa Hilti KWIK CAST KCM-MD
Guia de instalação detalhado para a placa longa Hilti KWIK CAST KCM-MD (Modelo 2221704), compatível com furos de 3/8" e 1/2". Inclui mais de um produto.view, segurança, instruções passo a passo e dados técnicos.
Préview Manual do usuário: Wireless CarPlay e Android Auto para Audi A1/Q3 (CX-Q3S, CX-3GQ3)
Manual do usuário completo para os módulos de reposição CX-Q3S e CX-3GQ3, que habilitam Wireless CarPlay e Android Auto para os modelos Audi A1/Q3 (2G/3GMMI, 09-18 anos). Inclui instalação, conexão, especificações, configurações e solução de problemas.
Préview PARKSIDE PSSO 500 A1 Oszillierender Spindel- und Bandschleifer Bedienungsanleitung
Die offizielle Bedienungsanleitung für den PARKSIDE PSSO 500 A1 Oszillierenden Spindel- und Bandschleifer. Enthält wichtige Sicherheitshinweise, Bedienungsanleitungen, Wartungsinformationen und technische Daten für Heimwerker.
Préview Manual de operação do estojo à prova d'água Seafrogs para câmeras Sony
Manual de operação completo para cases à prova d'água Seafrogs compatíveis com as câmeras Sony A1, A7SIII, A7RIV, A7RIVA e A9II. Abrange introdução, pontos de atenção, abertura do case, testes de impermeabilidade, preparação, instalação da câmera, manutenção, armazenamento, especificações e embalagem.