1. Introdução
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E6 Essential (ET365) Electric Standing Desk. Please read this manual thoroughly before use to ensure safe and efficient operation.
2. Informações de segurança
- Ensure the desk is loaded within the recommended maximum weight limit of 220 lbs (100 kg) to maintain stability and prevent damage.
- Adjust the desk height according to individual user heights to utilize the 3-stage lift system's full range and ensure optimal stability.
- Mantenha crianças e animais de estimação afastados da mesa durante o funcionamento.
- Evite colocar líquidos diretamente sobre o painel de controle ou perto de componentes elétricos.
- Não desmonte nem modifique os componentes elétricos da mesa. Para obter assistência técnica, entre em contato com o suporte ao cliente.
- Ensure all cables are properly managed to prevent tripping hazards and damage during height adjustments.
3. Conteúdo da embalagem
Your FLEXISPOT E6 Essential desk ships in two boxes. Please verify all components are present before beginning assembly.
Componentes incluídos:
- Desktop (One-Piece Maple Top, 48"x30")
- Desk Frame (White)
- Dual Motor Lift System
- Painel de controle com predefinições de memória
- Assembly Hardware (screws, wrenches, cable clips)
- Adaptador de energia e cabos
- Manual de instruções

Image: All components of the FLEXISPOT E6 Essential desk laid out for assembly, including the desktop, frame parts, control panel, and tools.
4. Configuração e montagem
Assembly typically requires one person and takes approximately 1 hour. Follow the steps below for a smooth setup.
4.1 Desembalagem e Preparação
- Carefully open both boxes and remove all components.
- Place the desktop upside down on a soft, clean surface (e.g., carpet or a blanket) to prevent scratches.
- Verify all parts against the package contents list.
4.2 Montagem do quadro
- Attach the lifting columns to the crossbeams using the provided screws and tools. Ensure screws are aligned with square holes and tightened securely.
- Connect the feet to the bottom of the lifting columns.
- Adjust the frame width to match your 48"x30" desktop.
Video: Official installation guide for the FLEXISPOT E6 Essential desk, detailing frame assembly and desktop attachment.
4.3 Acessório de mesa
- Center the assembled frame onto the underside of the desktop.
- Secure the frame to the desktop using the provided screws. Pre-drilled holes may be present; if not, carefully drill pilot holes.
- Attach the control panel to the underside of the desktop, ensuring it is flush with the edge.

Imagem: Close-up view of the intelligent keypad control panel with LED display and memory presets, located on the underside of the desktop.
4.4 Gerenciamento de cabos
- Connect the dual motors, control panel, and power adapter according to the labels.
- Utilize the built-in cable management tray and magnetic cover cloth to organize and conceal all wires.
- Ensure cables have enough slack to accommodate full height adjustment without tension.

Imagem: Parte inferior view of the FLEXISPOT E6 desk showing organized cables within the cable management system.
5. Instruções de operação
5.1 Ajuste de Altura
- Use o Para cima (▲) e Para baixo (▼) arrow buttons on the control panel to manually adjust the desk height. The LED display will show the current height.
- A mesa possui 3 compartimentos.tage lift system, allowing height adjustments from 23.6" to 48.8".
5.2 Predefinições de memória
- The control panel has four memory buttons (1, 2, 3, 4) to save your preferred sitting and standing heights.
- To save a height: Adjust the desk to your desired height, then press the 'M' button followed by one of the number buttons (1-4). The display will confirm the setting.
- To recall a saved height: Simply press the corresponding number button (1-4). The desk will automatically move to the saved position.
5.3 Sistema Anticolisão
- The desk is equipped with an anti-collision system that detects obstacles during height adjustment. If an obstacle is detected, the desk will stop and reverse slightly to prevent damage.
- Collision sensitivity can typically be adjusted via the control panel settings (refer to the full manual for detailed instructions).

Image: Diagram illustrating the anti-collision system of the FLEXISPOT E6 desk, showing it stopping upon encountering an obstacle.
6. Principais características
- Spacious One-Piece Desktop: A 48"x30" whole-piece maple desktop provides ampespaço para vários monitores e acessórios.
- 3-Stage Dual Motor Lift System: Offers a wide height adjustment range from 23.6" to 48.8" with smooth and quiet operation (under 50 dB).
- Alta capacidade de carga: Supports up to 220 lbs (100 kg), accommodating various office equipment.
- Painel de controle programável: Features an LED display and four memory presets for quick height adjustments.
- Construção robusta: Built with a strong steel structure for enhanced stability and durability.
- FSC-Certified Desktop: Tabletop made from responsibly sourced wood.

Imagem: Detalhada view of the intelligent keypad, highlighting the LED display, memory presets, and up/down controls.

Image: Visual representation of the desk's 220 lbs maximum load capacity, showing two 110 lbs weights on the desktop.
7. Manutenção
- Verifique regularmente todos os parafusos e porcas para garantir que estejam bem apertados.
- Limpe a superfície da mesa com um pano macio e seco.amp pano. Evite produtos químicos agressivos.
- Keep the electrical components dry and free from dust.
- Inspecione os cabos periodicamente em busca de sinais de desgaste ou danos.
8. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Desk not moving | Cabo de alimentação desconectado; sobrecarga; erro no motor. | Check power connections; reduce load; reset the desk (refer to full manual for reset procedure). |
| Ajuste de altura irregular | Uneven load; foot pads not adjusted. | Distribute weight evenly; adjust foot pads for balance. |
| Ruído durante a operação | Loose screws; normal motor sound. | Tighten all screws; slight motor sound is normal (under 50 dB). |
9. Especificações
| Marca | PONTO FLEXI |
| Nome do modelo | E6 Essencial |
| Número do modelo | ET365 |
| Dimensões da área de trabalho | 48"D x 30"W (47.5"D x 29.5"W actual) |
| Faixa de ajuste de altura | 23.6" a 48.8" |
| Sistema de Elevação | 3-Stage Motor Duplo |
| Capacidade máxima de peso | 220 libras (100 kg) |
| Nível de ruído | Menos de 50 dB |
| Material de mesa | FSC-Certified Maple Wood |
| Material da estrutura | Metal (moldura branca) |
10. Garantia e Suporte
FLEXISPOT offers the following warranty for your E6 Essential Electric Standing Desk:
- Cobertura de 5 anos: Estrutura da mesa e motor.
- Cobertura de 2 anos: Painel de controle e eletrônica.
For any assistance, questions, or warranty claims, please contact FLEXISPOT customer support through their official website ou o varejista onde o produto foi comprado.