Manual do Usuário do Aspirador Industrial de Sólidos e Líquidos Vacmaster VK1638SWC

1. Introdução

Thank you for choosing the Vacmaster VK1638SWC Industrial Wet and Dry Vacuum Cleaner. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new appliance. Please read these instructions thoroughly before use and retain them for future reference.

Image: The Vacmaster VK1638SWC vacuum cleaner actively cleaning a workshop floor, demonstrating its industrial application.

2. Informações de segurança

Siga sempre as precauções básicas de segurança ao usar este aparelho para reduzir o risco de incêndio, choque elétrico ou ferimentos.

• Read all instructions before operating the vacuum cleaner.
• Não deixe o aparelho sem vigilância quando conectado. Desconecte da tomada quando não estiver em uso e antes da manutenção.
• Do not pick up hot ashes, coals, or flammable/combustible liquids.
• Não use próximo a líquidos ou vapores explosivos.
• Ensure all filters are correctly installed for the intended operation (wet or dry).
• Mantenha cabelos, roupas largas, dedos e todas as partes do corpo longe de aberturas e peças móveis.
• Utilize apenas conforme descrito neste manual. Utilize somente os acessórios recomendados pelo fabricante.
• Não use com um cabo ou plugue danificado. Se o aparelho não estiver funcionando como deveria, tiver caído, danificado, deixado ao ar livre ou caído na água, devolva-o a um centro de serviço.
• Não puxe ou carregue pelo fio, use o fio como alça, feche uma porta no fio ou puxe o fio em torno de bordas ou cantos afiados. Não passe o aparelho sobre o fio. Mantenha o fio longe de superfícies aquecidas.
• Não desconecte puxando o cabo. Para desconectar, segure o plugue, não o cabo.
• Não manuseie o plugue ou o aparelho com as mãos molhadas.
• Desligue todos os controles antes de desconectar.
• Tenha cuidado extra ao limpar escadas.
• Não utilize para coletar líquidos inflamáveis ​​ou combustíveis, como gasolina, nem em áreas onde eles possam estar presentes.
• Não pegue nada que esteja queimando ou soltando fumaça, como cigarros, fósforos ou cinzas quentes.
• Não use sem filtros instalados.
• Este aparelho não se destina ao uso por pessoas (incluindo crianças) com capacidades físicas, sensoriais ou mentais reduzidas, ou com falta de experiência e conhecimento, a menos que tenham recebido supervisão ou instruções sobre o uso do aparelho de uma pessoa responsável pela sua segurança.
• As crianças devem ser supervisionadas para garantir que não brinquem com o aparelho.

3. Conteúdo da embalagem

Carefully unpack the box and ensure all items are present and undamaged. If any parts are missing or damaged, contact Vacmaster customer support.

• 1 x Dust Extractor Unit
• 1 x HEPA 13 Cartridge Filter
• 1 x HEPA Exhaust Filter
• 1 x Pre-filter (washable)
• 1 x filtro de espuma
• 2 x tubos de extensão
• 1 x Handle with Air Flow Control
• 1 x Universal Floor Head
• 1 x Dual Mode Floor Head
• 1 x Anti-crush Hose
• 1 x Round Dusting Tool
• 1 x Extra-large Crevice Tool
• 1 x Universal Power Tool Adaptor
• 1 x Bolsa para Acessórios
• 1 x 38L Hygiene Seal Dust Bag

Image: The Vacmaster VK1638SWC unit displayed with its full range of included accessories.

4. Configuração

4.1 Montagem do sistema de vácuo

1. Instalar rodízios: Insert the casters into the designated slots on the base of the vacuum until they click securely into place.
2. Anexar alça: Secure the handle to the top of the unit using the provided hardware.
3. Conecte a mangueira: Insert the anti-crush hose into the suction inlet on the front of the tank. Ensure it is firmly seated.
4. Instale filtros: Refer to section 4.2 for specific filter installation based on your intended use (wet or dry).

Imagem: Um close-up view of the yellow latch, indicating how to secure or release the motor head from the tank.

4.2 Instalação de Filtro

The VK1638SWC uses different filters for wet and dry applications. Always ensure the correct filter is installed before operation.

• Para aspiração a seco: Install the HEPA 13 Cartridge Filter and the washable Pre-filter. Ensure the HEPA Exhaust Filter is also in place. The 38L hygiene seal dust bag can be used for improved dust collection and disposal.
• Para Aspiração Úmida: Remove the HEPA 13 Cartridge Filter and Pre-filter. Install the Foam Filter over the filter cage. Do NOT use the dust bag for wet vacuuming.

Image: A person demonstrating the process of accessing and handling the filter inside the vacuum cleaner's tank.

5. Instruções de operação

5.1 Aspiração a Seco

1. Ensure the HEPA 13 Cartridge Filter and Pre-filter are correctly installed.
2. Connect the desired extension tubes and floor head (universal or dual mode) or other accessory to the hose.
3. Ligue o cabo de alimentação a uma tomada elétrica adequada (240 Volts).
4. Turn the vacuum cleaner ON using the power switch.
5. Begin vacuuming the dry debris.
6. Ao terminar, desligue o aspirador e desconecte-o da tomada.

Image: The Vacmaster VK1638SWC vacuum cleaner fully assembled with its hose, extension tubes, and floor head.

5.2 Aspiração úmida

1. Ensure the Foam Filter is correctly installed and the HEPA 13 Cartridge Filter and Pre-filter are removed.
2. Connect the desired floor head or accessory suitable for wet pickup to the hose.
3. Conecte o cabo de alimentação a uma tomada elétrica adequada.
4. Turn the vacuum cleaner ON.
5. Begin vacuuming liquids. The vacuum has an automatic shut-off feature that will stop suction when the tank is full.
6. When finished or when the tank is full, turn the vacuum OFF and unplug it. Empty the tank as described in the Maintenance section.

Image: The Vacmaster VK1638SWC vacuum cleaner demonstrating its liquid draining capability from the tank's outlet.

5.3 Função do soprador

The VK1638SWC can also function as a powerful blower.

1. Ensure the tank is empty and clean, and the appropriate filter is installed (HEPA for dry blowing, no filter or foam filter for wet blowing).
2. Remove the hose from the suction inlet.
3. Insert the hose into the blower port located on the motor head.
4. Plug in and turn ON the vacuum to use the blower function.

5.4 Power Tool Connection

The included universal power tool adaptor allows for direct dust extraction when working with power tools.

1. Ensure the vacuum is set up for dry vacuuming with the HEPA 13 filter.
2. Connect the universal power tool adaptor to the end of the vacuum hose.
3. Attach the other end of the adaptor to the dust extraction port on your power tool.
4. Plug the power tool into the integrated power socket on the vacuum cleaner (if available and compatible). This allows the vacuum to start automatically when the power tool is activated.
5. Turn on the vacuum cleaner and then your power tool to begin dust extraction.

Image: The Vacmaster VK1638SWC vacuum cleaner connected to a sanding machine, demonstrating its dust extraction capability.

5.5 Using the Wheel Brake

To secure the vacuum cleaner in place, engage the wheel brake by pressing down on the lever located on one of the casters. To release, lift the lever.

Image: A person's foot pressing down on the yellow lever to engage the wheel brake on the vacuum cleaner.

6. Manutenção

Regular maintenance ensures optimal performance and extends the life of your vacuum cleaner. Always unplug the unit before performing any maintenance.

6.1 Limpeza e Substituição do Filtro

• HEPA 13 Cartridge Filter & Pre-filter: For dry use, these filters should be cleaned regularly by tapping them gently to dislodge dust or by using a soft brush. The pre-filter is washable; rinse with water and allow to air dry completely before reinstallation. Replace the HEPA cartridge filter when suction power significantly decreases or if it becomes damaged.
• Filtro de espuma: For wet use, the foam filter should be rinsed with water after each use and allowed to air dry completely before storage or next use.
• Filtro de exaustão HEPA: Check periodically and replace if visibly dirty or if air quality issues are noted.

6.2 Tank Cleaning and Emptying

• Detritos secos: Unlatch the motor head and carefully lift it off. Remove the dust bag (if used) and dispose of contents. Empty any remaining debris from the stainless steel tank.
• Líquidos: For liquid disposal, the tank can be emptied by tilting the unit or by using the drain plug located at the bottom of the tank. After emptying, rinse the tank with water and wipe dry to prevent odors and corrosion.

6.3 Armazenamento de acessórios

The VK1638SWC features integrated storage for its accessories, keeping them organized and readily accessible.

Image: The Vacmaster VK1638SWC vacuum cleaner showcasing its onboard storage for hose, power cord, and various attachments.

7. Solução De Problemas

Antes de entrar em contato com o suporte ao cliente, consulte a tabela a seguir para obter informações sobre problemas comuns e suas soluções.

8. Especificações

9. Garantia e Suporte

9.1 Informações de garantia

The Vacmaster VK1638SWC Industrial Wet and Dry Vacuum Cleaner comes with a Garantia de 2 ano from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, unauthorized repairs, or lack of maintenance.

9.2 Suporte ao cliente

For technical assistance, warranty claims, or to order replacement parts, please contact Vacmaster customer support. Refer to the contact information provided with your purchase documentation or visit the official Vacmaster website.