1. Introdução
This manual provides detailed instructions for the installation, operation, and maintenance of your EMOS ZM4328 TORI LED Ceiling Light. This 15W LED light features a microwave motion sensor, providing 1500 lumens of 4000K neutral white light. It is designed for both indoor and outdoor use, including damp environments, thanks to its IP54 rating. Please read these instructions carefully before installation and retain them for future reference.
Figure 1: EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty indication.
2. Instruções de segurança
- Segurança elétrica: A instalação deve ser realizada por um eletricista qualificado, de acordo com as normas locais de instalações elétricas. Certifique-se de que a alimentação elétrica esteja desligada antes da instalação ou manutenção.
- Volumetage: This product operates on a 230V AC power supply.
- Classificação IP54: The light is protected against dust ingress and splashing water from any direction. This makes it suitable for damp locations and outdoor sheltered areas, but not for submersion.
- Fonte de luz: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light source.
- Temperatura de operação: Ensure the operating environment is within the specified temperature range to prevent damage.
3. Conteúdo da embalagem
Verifique se todos os componentes estão presentes antes de iniciar a instalação:
- 1x EMOS ZM4328 TORI LED Ceiling Light with MW Sensor
- Mounting accessories (screws, wall plugs, foam pads)
Figure 2: Included mounting accessories.
4. Configuração e instalação
Siga estas etapas para uma instalação correta:
- Desconecte a energia: Antes de começar, certifique-se de que a alimentação principal de energia da área de instalação esteja desligada no disjuntor.
- Preparar a superfície de montagem: Choose a suitable location on a ceiling or wall. The light is suitable for indoor and outdoor use, including bathrooms, hallways, kitchens, balconies, and terraces.
- Fixe o suporte de montagem: Remove the mounting bracket from the back of the light fixture. Use the bracket as a template to mark drilling points on the surface. Drill holes and insert wall plugs if necessary. Secure the mounting bracket to the surface using the provided screws.
Figura 3: Traseira view with mounting bracket.
- Fiação: Connect the main power supply cables to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral). The terminal block is designed for secure connections.
Figure 4: Wiring terminal connection points.
- Secure Light Fixture: Once wiring is complete, carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
- Restaurar energia: Switch the main power supply back on.
5. Instruções de operação
The EMOS ZM4328 TORI LED Ceiling Light features an integrated microwave motion sensor for automatic operation.
Funcionalidade do sensor de movimento
- The microwave motion detector reacts to movement within a range of up to 6 meters.
- Unlike traditional PIR sensors, microwave sensors can detect movement even through thin doors, window glass, or thin walls, offering broader coverage.
- The light will automatically turn on when motion is detected and turn off after a set delay if no further motion is detected.
Adjusting Sensor Settings (DIP Switches)
The light features DIP switches to adjust sensitivity, detection range, and hold time. These switches are typically located on the side of the fixture, accessible by opening a small cover.
Figure 5: DIP switches for sensor configuration.
Refer to the markings next to the DIP switches for specific settings related to:
- Faixa de detecção: Adjusts the maximum distance at which motion is detected.
- Tempo de espera: Sets the duration the light remains on after the last detected motion.
- Daylight Sensor (Lux Level): Determines the ambient light level at which the sensor becomes active. For example, you can set it to only activate when it's dark.
Observação: Always disconnect power before adjusting DIP switches to avoid electrical hazards.
6. Manutenção
- Limpeza: Para limpar a luminária, certifique-se de que a energia esteja desligada. Use um pano macio e seco.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or diffuser.
- Proteção contra insetos: The high IP54 protection class prevents mosquitoes or flies from entering the lamp, reducing the need for internal cleaning.
- Nenhuma peça que possa ser reparada pelo usuário: The LED light source is integrated and not designed for user replacement. Do not attempt to open the sealed unit beyond accessing the wiring and DIP switches.
7. Solução De Problemas
If you encounter issues with your EMOS ZM4328 TORI LED Ceiling Light, refer to the following common problems and solutions:
| Problema | Possível causa | Solução |
|---|---|---|
| A luz não acende. | Sem fonte de alimentação. Fiação incorreta. Daylight sensor setting too high. | Verifique o disjuntor e a ligação elétrica. Verify wiring connections (Live, Neutral). Adjust the daylight sensor (Lux) setting on the DIP switches. |
| A luz permanece acesa constantemente. | Movimento contínuo detectado. Hold time setting too long. Mau funcionamento do sensor. | Garantir que não haja movimento constante na área de detecção. Adjust the hold time setting on the DIP switches to a shorter duration. Se o problema persistir, entre em contato com o suporte. |
| Light turns on/off too frequently. | Sensitivity too high. Detection range too wide. | Reduce the sensitivity and/or detection range using the DIP switches. |
| O sensor não detecta movimento. | Sensitivity too low. Detection range too narrow. Sensor de obstrução. Daylight sensor setting too low (light always on). | Increase sensitivity and/or detection range via DIP switches. Ensure no large metal objects or thick walls are directly in front of the sensor. Adjust the daylight sensor (Lux) setting. |
8. Especificações
| Marca | EMOS |
| Número do modelo | ZM4328 |
| Dimensões (Diâmetro x Altura) | 220 mm x 53 mm (approx. 8.66 in x 2.09 in) |
| Peso | 622 gramas (aprox. 1.37 lbs) |
| Poder | 15 Watts |
| Fluxo Luminoso | 1500 lúmens |
| Temperatura de cor | 4000 Kelvin (Branco Neutro) |
| Índice de reprodução de cor (CRI) | 80 |
| Incandescent Equivalence | 100 Watts |
| Volumetage | 230 Volts AC |
| Classificação IP | IP54 |
| Material | Acrylonitrile Butadiene Styrene (ABS), Plastic diffuser |
| Características especiais | Microwave Motion Detector, Energy-saving, Waterproof |
| Classe de Eficiência Energética | E (on new scale from 1.9.2021) |
Figura 6: Dimensões do produto.
Figure 7: Energy Efficiency Label (Class E).
9. Garantia e Suporte
Garantia
This EMOS ZM4328 TORI LED Ceiling Light comes with a Garantia de 3 ano A garantia é válida a partir da data da compra. Guarde o comprovante de compra para eventuais solicitações de garantia. A garantia cobre defeitos de materiais e de fabricação em condições normais de uso.
Suporte ao cliente
For technical assistance, warranty claims, or any questions regarding your product, please contact your retailer or the EMOS customer service department. Contact information can typically be found on the product packaging or the official EMOS website.
