Introdução
The Infinity Primus 603F 6.5-inch 2-Way Multi-Element Speakers are designed to enhance your in-car audio experience. Featuring patented Plus One woofer cone architecture and edge-driven silk dome tweeters, these speakers deliver clear vocals, crisp high frequencies, and defined bass. The compact design facilitates installation in various vehicle types, and the vented basket frame promotes cooling for reliable performance.
O que está na caixa
- 2x Alto-falantes
- 8x Parafusos
- Clipes de velocidade 8x
- 2x 18AWG, 200mm length pigtail cable
- 1x juntas de espuma
- 2x adesivos de marca
- 1x manual do proprietário
Principais características
- Plus One Woofer Cone Architecture: Provides increased speaker cone area (up to 35%) compared to other cones in its class, contributing to enhanced bass output and overall sound efficiency.
- Edge-driven Silk Dome Tweeter: Expands the high-frequency range, ensuring detailed and natural reproduction of high notes.
- Design compacto: Engineered for easy installation in tight spaces, allowing compatibility with a wider range of vehicles without extensive modifications.
- Vented Basket Frame: Designed to cool the voice coils, improving speaker reliability and performance by dissipating heat effectively.
- Consistent Sound Signature: Carefully tuned to deliver the characteristic Infinity sound, known for its balanced and clear audio reproduction.
Configurar
- Preparação: Ensure your vehicle's audio system is turned off and the battery is disconnected before beginning installation. Gather all necessary tools, including screwdrivers, wire strippers, and any specific mounting hardware.
- Speaker Removal: Carefully remove existing speakers from their mounting locations. Refer to your vehicle's service manual for specific instructions on panel removal and speaker access.
- Montagem: Position the new Infinity Primus 603F speakers in the desired location. Utilize the provided screws and speed clips to secure the speakers firmly. The compact design aids in fitting into various spaces. Ensure no wires are pinched or obstructed.
- Fiação: Connect the speaker wires to your vehicle's audio system. Use the provided 18AWG pigtail cables if needed. Pay close attention to positive (+) and negative (-) terminals to ensure correct polarity. Incorrect wiring can lead to poor sound quality or damage.
- Teste: Once speakers are securely mounted and wired, reconnect the vehicle battery and test the audio system at a low volume. Gradually increase the volume to check for proper function and sound quality.
- Montagem final: Reinstall any removed panels or grilles. Ensure all components are reassembled correctly and securely.
Operacional
Once installed, the Infinity Primus 603F speakers operate as part of your vehicle's audio system. Adjust your head unit's settings (bass, treble, balance, fader) to optimize the sound to your preference. These speakers are designed to deliver a balanced sound profile with clear highs and defined lows.
Manutenção
- Limpeza: Periodically wipe the speaker grilles and surrounding areas with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
- Inspeção: Occasionally inspect the speaker cones and surrounds for any signs of damage or wear. Ensure all mounting screws remain tight.
- Fatores ambientais: While designed for automotive use, avoid exposing speakers to excessive moisture or extreme temperatures for prolonged periods, as this can affect performance and longevity.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Não há som nos alto-falantes | Incorrect wiring; loose connections; amplifier issue; head unit issue. | Check all wiring connections for correct polarity and tightness. Verify amplifier and head unit are functioning correctly. |
| Som distorcido | Overpowering speakers; incorrect gain settings; damaged speaker cone/surround. | Reduzir o volume ou amplifier gain. Check speaker for physical damage. Ensure power handling limits are not exceeded. |
| Graves fracos ou inexistentes | Incorrect polarity; phase issues; inadequate power. | Verify correct wiring polarity. Check head unit/amplifier settings for bass boost or crossover. Ensure sufficient power is supplied. |
| Som intermitente | Loose wiring connections; faulty speaker wire. | Inspect all connections for looseness. Replace damaged speaker wire. |
Especificações
| Especificação | Valor |
|---|---|
| Tamanho do woofer | 6-1/2 inches (6.5 inches) |
| Material do Woofer | Polypropylene Driver |
| Tipo de tweeter | Cúpula de Seda |
| Tamanho do Tweeter | 1/2 de polegada |
| Manuseio de energia (RMS) | 50 Wrms |
| Manipulação de energia (pico) | Pico de 150W |
| Sensibilidade (2.83V@1m) | 92 dB |
| Resposta de frequência (-6dB) | 55Hz – 20kHz |
| Impedância nominal | 3.0 ohms |
| Ponto de passagem | 5kHz@6dB/octave |
| Tipo de montagem | Montagem embutida |
| Dimensões do produto | 15"P x 4"L x 8"A |
| Peso do item | 3.1 libras |
Vídeo oficial do produto
Vídeo 1: Um vídeo oficial do produto apresentadoasing the design and features of Infinity Reference Speakers, including the Plus One woofer cone and silk dome tweeters.
Garantia e Suporte
Este produto vem com um Garantia limitada. For detailed warranty information, terms, and conditions, please refer to the included owner's manual or visit the official Infinity website. For technical support or service inquiries, please contact Infinity customer service.
