1. Introdução
Thank you for choosing the APLOS AP50 Scuba Diving Flashlight. This manual provides essential information for the safe and effective use of your dive light. Please read it thoroughly before operation and retain it for future reference.
2. Informações de segurança
- Do not operate out of water for extended periods: The flashlight generates heat. Prolonged use out of water can cause overheating and damage.
- Segurança da bateria: Use only the specified rechargeable battery. Ensure correct polarity during installation. Do not expose batteries to extreme temperatures or dispose of them in fire.
- Selos à prova d'água: Always ensure O-rings are clean, properly seated, and lubricated before diving to maintain the IPX8 waterproof rating.
- Proteção para os olhos: The AP50 emits a powerful beam. Avoid direct eye exposure to prevent temporary vision impairment.
- Crianças: Mantenha fora do alcance de crianças.
3. Conteúdo da embalagem
Upon opening your APLOS AP50 package, please verify that all items are present:
- 1 x APLOS AP50 Dive Light
- 1 x Rechargeable Lithium-Ion Battery (5000mAh)
- 1 x USB Battery Charger
- 1 x cabo de carregamento USB
- 2 x anéis de reposição
- 1 x Cordão
- 1 x Manual do Usuário

Imagem 3.1: Contents of the APLOS AP50 package, showing the flashlight, charger, USB cable, spare O-rings, and user manual.
4. Produto acabadoview
The APLOS AP50 is a high-performance scuba diving flashlight designed for underwater exploration. It features a durable aluminum alloy body, a powerful P70 LED, and multiple lighting modes.

Imagem 4.1: Diagram illustrating the key components of the APLOS AP50 dive light, including the P70 LED, high transparent tempered glass lens, AL-6061-T6 aluminum alloy body, mode switch button, and waterproof O-rings.
Principais características:
- P70 High-Definition LED: Delivers up to 5000 lumens with a 7000K cool white beam.
- Classificação à prova d'água IPX8: Submersible up to 110 meters (360 feet).
- Construção durável: Made from AL-6061-T6 aluminum alloy with a wear-resistant coating and toughened glass lens.
- Four Brightness Modes: High (5000lm), Medium (2000lm), Low (1000lm), and Strobe (2000lm).
- Bateria de longa duração: Built-in 5000mAh rechargeable battery provides over 8 hours of runtime in low mode.
- Smart Power Status Display: Integrated indicator light shows battery level.

Imagem 4.2: The APLOS AP50 flashlight highlighting its three adjustable modes (High, Medium, Beacon) and the P70 LED with a maximum output of 5000 lumens.

Imagem 4.3: The intelligent power status display on the APLOS AP50, showing different LED colors (Green, Yellow, Red, Red Flashing, Power off) corresponding to battery voltage níveis.
5. Configuração
5.1 Instalação e carregamento da bateria
- Unscrew Tail Cap: Gently unscrew the tail cap of the flashlight counter-clockwise.
- Insira a bateria: Insert the provided 5000mAh rechargeable Lithium-Ion battery with the positive (+) end facing towards the flashlight head.
- Tampa traseira segura: Screw the tail cap back on clockwise, ensuring it is tightened completely to maintain the waterproof seal.
- Carga inicial: Before first use, fully charge the battery using the included USB charger and cable. The charger indicator will typically change color (e.g., red to green) when charging is complete.

Imagem 5.1: Illustration demonstrating the importance of securely tightening the tail cap of the diving flashlight to ensure proper waterproofing and functionality. If difficult to screw, apply specialized lubricating silicone grease or edible oil.

Imagem 5.2: The universal USB charger included with the APLOS AP50, compatible with various USB power sources like laptops, power banks, and wall adapters.
6. Instruções de operação
6.1 Ligar/Desligar e Seleção de Modo
The APLOS AP50 features a single side switch for all operations.
- Para Ativar: Press the side switch once. The flashlight will turn on in the last used mode.
- Para alterar os modos: While the flashlight is on, press the side switch repeatedly to cycle through the modes: High → Medium → Low → Strobe.
- Desligar: Press and hold the side switch for approximately 2 seconds. Alternatively, double-click the switch to turn it off directly from any mode.
6.1 vídeo: An official product video demonstrating the operation of the APLOS AP50 Scuba Diving Flashlight, including turning it on, cycling through brightness modes, and turning it off. This video showcases the flashlight's functionality and ease of use.
6.2 Indicador de nível de bateria
A luz indicadora no interruptor lateral fornece o status da bateria em tempo real:
- Luz verde: Vol da bateriatage above 3.4V (High).
- Luz amarela: Vol da bateriatage 3.2V - 3.4V (Medium).
- Luz vermelha: Vol da bateriatage 3.0V - 3.2V (Low).
- Luz vermelha piscando: Vol da bateriatage 2.8V - 3.0V (Critically Low, recharge immediately).
- Sem luz: Vol da bateriatage below 2.8V (Power off).
7. Manutenção
- Enxágue após o uso: After each dive, rinse the flashlight thoroughly with fresh water to remove salt, sand, or debris.
- Cuidados com os anéis de vedação: Regularly inspect the O-rings for any signs of damage, cracks, or debris. Clean them and apply a thin layer of silicone grease to maintain their elasticity and sealing properties. Replace damaged O-rings immediately using the provided spares.
- Armazenamento da bateria: If storing the flashlight for an extended period, remove the battery to prevent potential leakage and discharge. Store the battery in a cool, dry place.
- Limpeza de lentes: Clean the tempered glass lens with a soft, lint-free cloth. Avoid abrasive materials that could scratch the surface.
8. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A lanterna não liga. | A bateria está descarregada ou instalada incorretamente. | Charge the battery. Ensure the battery is inserted with correct polarity (+ towards head). |
| A luz pisca ou está fraca. | Bateria fraca ou conexão solta. | Recharge the battery. Ensure the tail cap is fully tightened. |
| Entrada de água após o mergulho. | Damaged or improperly seated O-rings; tail cap not fully tightened. | Inspect and clean O-rings, apply silicone grease, and ensure the tail cap is securely tightened before diving. Replace O-rings if damaged. |
| Flashlight overheats quickly out of water. | Normal operation for high-power LED lights. | Avoid prolonged use out of water. The flashlight is designed for heat dissipation in water. |
9. Especificações
| Recurso | Detalhe |
|---|---|
| Modelo | AP50 |
| Fonte de luz | LED P70 |
| Brilho Máximo | 5000 Lúmens |
| Temperatura de cor | 7000K (branco frio) |
| Beam Distance (Land) | Até 500 metros |
| Classificação à prova d'água | IPX8 |
| Max Diving Depth | 110 metros (360 pés) |
| Material | AL-6061-T6 Aluminum Alloy |
| Tipo de Bateria | Bateria recarregável de íon-lítio (5000mAh) |
| Vol operacionaltage | 3.7 Volts |
| Dimensões | 6.7 x 2.6 x 1.4 polegadas |
| Peso | 1.12 libras (510 gramas) |
10. Garantia e Suporte
APLOS products are manufactured with quality and performance in mind. For warranty information, technical support, or any inquiries regarding your AP50 Scuba Diving Flashlight, please refer to the warranty card included in your package or visit the official APLOS webVocê também pode entrar em contato com seu revendedor para obter assistência.
Para obter informações adicionais e atualizações de produtos, visite o site. APLOS Store on Amazon.



