BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Introdução

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Características do produto

• Sensor de movimento integrado: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Adjustable Hold Time: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Três modos de operação:
  • Modo automático: Light activates when motion is detected in dark conditions.
  • Modo LIGADO: Light remains constantly on.
  • Modo G: Light activates when motion is detected in both daytime and nighttime conditions.
• Três temperaturas de cor: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Design ultrafino: Low-Profile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Instalação versátil: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Conteúdo da embalagem

Verifique se todos os componentes estão presentes antes de iniciar a instalação:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Manual de Instruções (este documento)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Informações de segurança

AVISO: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• This fixture is designed for 120V AC power supply.
• Não tente modificar a luminária.
• Mantenha as crianças afastadas da área de instalação.

Configuração e instalação

Siga estas etapas para uma instalação correta:

1. Prepare-se para a Instalação:
   • Desligue a energia no disjuntor antes de começar.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Instale o suporte de montagem:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Conexões de fios:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Montagem da luminária:
   • Coloque cuidadosamente todos os fios na caixa de junção.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Restaurar energia: Ligue novamente a energia no disjuntor.

Figura 4: Guia visual para o processo de instalação.

Instruções de operação

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Selecionando o modo operacional:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • CARRO: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • EM: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 segundos
   • 120S: 120 segundos (2 minutos)
   • 180S: 180 segundos (3 minutos)

Figure 5: Switches for adjusting hold time and operating modes.

Manutenção

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• Limpeza: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Tempo de vida do diodo emissor de luz: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
• Inspeção: Verifique periodicamente a luminária para detectar sinais de danos ou conexões soltas. Se encontrar algum problema, desligue a energia e consulte um eletricista qualificado.

Solução de problemas

Se você tiver problemas com sua luminária, consulte os problemas e soluções comuns a seguir:

Especificações

Garantia e Suporte

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN webGuarde o comprovante de compra como prova de aquisição.