Introdução
Thank you for choosing the OttLite Wellness Series Capture Clip-On LED Ring Light. This versatile lighting solution is designed to provide optimal illumination for various tasks, including computer work, reading, and content creation. Featuring OttLite's exclusive ClearSun LED technology, this light aims to reduce eyestrain and enhance color accuracy. This manual provides essential information for the safe and effective use of your new light.
Informações importantes de segurança
- Read all instructions before using this product to prevent injury or damage.
- Do not operate the light with a damaged cord or plug. If the light malfunctions, discontinue use immediately.
- This light is for indoor use only. Do not expose to water or high humidity.
- Não tente desmontar ou modificar a luminária. Não há peças que possam ser reparadas pelo usuário em seu interior.
- Keep the light away from heat sources and direct sunlight to prevent overheating.
- Always unplug the light from the power source before cleaning or when not in use.
- Avoid looking directly into the LED light source for extended periods, as it may cause eye discomfort.
Conteúdo da embalagem
- OttLite Wellness Series Capture Clip-On LED Ring Light
- Cabo de alimentação USB
Observação: O adaptador de energia USB não está incluído e deve ser fornecido pelo usuário.
Configurar
- Descompacte a Luz: Remova cuidadosamente todos os componentes da embalagem.
- Anexe o clipe: Securely attach the spring-loaded clip to a stable surface such as a desk, shelf, or table edge. Ensure the clip has a firm grip to prevent the light from falling.
- Conecte a energia: Insert the small end of the USB power cable into the port on the light's base. Plug the larger end of the USB cable into a compatible USB power adapter (not included) or a computer's USB port.
- Activate Power Switch: Locate the small sliding switch near the USB port on the light's base. Slide it to the 'ON' position. The light will not operate if this switch is in the 'OFF' position, even when plugged in.
- Posicione a luz: Adjust the flexible gooseneck to direct the ring light to your desired position and height. The 21.25-inch flexible neck allows for precise light placement.
Instruções de operação
The OttLite Capture Clip-On LED Ring Light features inline cord controls for easy adjustment of power, brightness, and color temperature.
- Ligar/desligar: Pressione o LIGADO/DESLIGADO button (red power symbol) on the cord controls to turn the light on or off.
- Ajustar brilho: Use o + e - buttons to increase or decrease the brightness level. There are 10 levels of brightness available.
- Alterar modo de cor: Pressione o MODO button (circular arrow symbol) to cycle through the three available color temperature modes: Warm White, Bright White, and Natural Daylight.
Manutenção
- Limpeza: Ensure the light is unplugged before cleaning. Use a soft, dry cloth to wipe down the light and its components. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Armazenar: Quando não estiver em uso por longos períodos, guarde a lâmpada em local fresco e seco, longe da luz solar direta e de temperaturas extremas.
- LEDs: The LED bulbs are integrated and not replaceable. They are designed for long-lasting performance.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A luz não acende. | 1. Power cable not securely connected. 2. USB power adapter not functioning. 3. Side power switch is OFF. | 1. Ensure USB cable is firmly plugged into both the light and the power source. 2. Try a different USB power adapter or USB port. 3. Locate the small sliding switch near the USB port on the light's base and ensure it is in the 'ON' position. |
| A luz está fraca ou intermitente. | 1. Low power supply. 2. A configuração de brilho está muito baixa. | 1. Ensure the USB power source provides sufficient power. Try a different USB adapter. 2. Press the '+' button on the inline cord controls to increase brightness. |
| Cannot change color mode or brightness. | Inline controls are unresponsive. | Ensure the light is powered on and the side power switch is in the 'ON' position. If issues persist, unplug and re-plug the light to reset. |
Especificações
- Modelo: CSJ36G5W
- Fonte de energia: USB (adaptador não incluído)
- Tipo de luz: LIDERADO
- Modos de temperatura de cor: 3 (Warm White, Bright White, Natural Daylight)
- Níveis de brilho: 10
- Flexible Neck Length: Aproximadamente 21.25 polegadas
- Diâmetro da luz do anel: Aproximadamente 4.3 polegadas
- Índice de reprodução de cor (IRC): 95+
- Dimensões do produto: 4.5 x 4.5 x 25 polegadas (montado)
- Peso do item: 11.2 onças
- Material: Metal
Garantia e Suporte
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official OttLite webGuarde seu comprovante de compra para eventuais solicitações de garantia.
